Products in Medical: Prepreg

APCM DA 409U/S2-glass is a tough, versatile, modified epoxy resin prepreg that cures at 250ºF. The S-2 glass is a Zentron High Strength fiber. Standard weight is 260g/m2 with a 38% resin content. Other weights and resin contents available upon request.

IM Carbon Fiber UD150H60-T800 GRADE is a E3 Matrix System with a precursor as PAN.

FR408 low dielectric constant (Dk) and low dissipation factor (Df) make it an ideal candidate for broadband circuit designs requiring faster signal speeds or improved signal integrity. FR408 is compatible with most FR-4 processes. This feature allows the use of FR408 without adding complexity to current fabrication techniques.

PREGNIT TP-PC is a transparent, dimensionally stable, impact resistant, flame retardant possible according to UL94-VO, printable.

IM Carbon Fiber UD200H60-MR60H is a E3 Matrix System with a precursor as PAN.

HS Carbon Fiber UD150H60 is a E3 Matrix System with a precursor as PAN.

IM Carbon Fiber UD125 H60-MR70 is a E3 Matrix System with a precursor as PAN.

HS Carbon Fiber UD350H60 is a E3 Matrix System with a precursor as PAN.

IM Carbon Fiber UD110 H50-IMS65 GRADE is a E3 Matrix System with a precursor as PAN.

Toray E726 is a toughened epoxy resin system with controlled flow for cures at 120°C (248°F), pre-impregnated into high performance fibers such as carbon, glass and aramid. It is designed for use within medical and industrial Applicationss and would also suit a wide range of engineering Applicationss. Toray E726 is compatible for co-cure with Toray EF72, a 120°C (248°F) cure resin film and Toray MicroPly™ SC72A syntactic core.

APCM DA 4092 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

APCM DA 4518U is a tough, versatile, modified epoxy resin system that cures at 250°F to 350°F. DA4518U can be supplied as a prepreg tape coated on unidirectional graphite.

HS Carbon Fiber UD600H60 is a E3 Matrix System with a precursor as PAN.

IM Carbon Fiber UD100H60-T1000 GRADE is a E3 Matrix System with a precursor as PAN.

IM Carbon Fiber UD200H60-T800 GRADE is a E3 Matrix System with a precursor as PAN.

IM Carbon Fiber UD150H60-MR70 is a E3 Matrix System with a precursor as PAN.

Toray E720 is a 120°C (248°F) cure toughened epoxy prepreg. E720 offers excellent adhesive properties, allowing direct lamination to honeycomb without the use of a film adhesive. E720 is designed for structural Applicationss in motorsport and marine industries. E720 would also suit general aircraft fittings, sporting equipment, and a wide range of engineering Applicationss. Toray E720 is compatible for co-cure with Toray’s 120°C (248°F) cure resin film MicroPly™ EF72 and syntactic core Toray MicroPly™ SC72A. If fire retardant properties are required, refer to Toray E721-FR. 120°C (248°F) Cure Toughened Epoxy Resin System

PREGNIT TP-PE has high resistance to acids, Alkalis and chemicals.

FR408HR laminate and prepreg products are manufactured with Isola’s patented high performance multifunctional resin system, reinforced with electrical grade (E-glass) glass fabric. This system delivers a 30% improvement in Z-axis expansion and offers 25% more electrical bandwidth (lower loss) than competitive products in this space. These properties coupled with superior moisture resistance at reflow, result in a product that bridges the gap from both a thermal and electrical perspective. The FR408HR system is also laser fluorescing and UV blocking for maximum compatibility with Automated Optical Inspection (AOI) systems, optical positioning systems and photo-imageable solder mask imaging.

I-Speed® laminate and prepreg products are manufactured with Isolas' patentable high performance multi-functional resin system, reinforced with electrical grade (E-glass) glass fabric. This system delivers a 15% improvement in Z-axis expansion and offers 25% more electrical bandwidth (lower loss) than competitive products in this space. These properties coupled with superior moisture resistance at reflow, result in a product that bridges the gap from both a thermal and electrical perspective. The I-Speed® resin system is laser fluorescing and UV blocking for maximum compatibility with Automated Optical Inspection (AOI) systems, optical positioning systems and photo imageable solder mask imaging.

IM Carbon Fiber UD125 H60-MR60H is a E3 Matrix System with a precursor as PAN.

IM Carbon Fiber UD150H60-MR60H is a E3 Matrix System with a precursor as PAN.

IM Carbon Fiber UD200H60-T1000 GRADE is a E3 Matrix System with a precursor as PAN.

APCM DA 4090 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

APCM DA 4080 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.

HS Carbon Fiber UD250H60 is a E3 Matrix System with a precursor as PAN.

P25N consist of a polyimide resin system suitable for military, commercial or industrial electronic applications requiring superior performance and the utmost in thermal properties. These products utilize a polyimide and thermoplastic blend resin, fully cured without the use of Methylenedianiline (MDA). This results in a polymer with a high Tg without the characteristic difficulties of brittleness and low initial bond strength associated with traditional thermoset polyimides.

APCM DA 4518 E-Glass is a modified epoxy system coated on heavy weight unidirectional E-Glass fibers. This product is designed to build excellent unidirectional strength using a minimum number of plies. DA 4518/E-Glass Uni also features extended room temperature out time and service temperatures to 300°F.

IM Carbon Fiber UD200H60-MR70 is a E3 Matrix System with a precursor as PAN.

I-Tera MT40 is suitable for many of today’s high speed digital and RF/microwave printed circuit designs. I-Tera MT40 features a dielectric constant (Dk) that is stable between - 55°C and +125°C up to W-band frequencies. In addition, I-Tera MT40 offers a lower dissipation factor (Df) of 0.0031 making it a cost effective alternative to PTFE and other commercial microwave and high-speed digital laminate materials. I-Tera MT40 laminate materials are currently being offered in both laminate and prepreg form in typical thicknesses and standard panel sizes. This provides a complete materials solution package for high-speed digital multilayer, hybrid, RF/microwave, multilayer and double-sided printed circuit designs. I-Tera MT40 does not require any special through hole treatments commonly needed when processing PTFE-based laminate materials.

Toray E721-FR is a modified epoxy resin system of medium viscosity for cures at 120°C (248°F), pre-impregnated into high performance fibers such as carbon, glass, and aramid. Toray E721-FR offers excellent structural properties, flame retardancy, and exceptional toughness allowing direct lamination to honeycomb without the use of resin film. Toray E721-FR is designed for structural Applicationss in the motor racing, marine industries, and for a wide range of engineering Applicationss. If fire-retardant properties are not required, consult separate data sheet for Toray E720.

APCM DA 409U/G35-150 is a tough, versatile, modified epoxy resin prepreg that cures at 250°F, a standard modulus 150 g/m2 carbon prepreg tape which can also be supplied as a 200g/m2 or a 300 g/m2 prepreg.

IM Carbon Fiber UD100H60-MR70 is a E3 Matrix System with a precursor as PAN.

IM Carbon Fiber UD100H60-T800 GRADE is a E3 Matrix System with a precursor as PAN.

PREGNIT TP-AC is high gloss, scratch resistant.

HS Carbon Fiber UD300H60 is a E3 Matrix System with a precursor as PAN.