Products in Medical: Low Odor

Ecomass® compound 4703ZD95 is a tungsten-filled thermoplastic polyurethane compound that is recommended to be used in weighting, balancing, radiation shielding and vibration dampening applications. This injection molding grade is known for its good toughness. Additionally, it functions as a nontoxic thermoplastic lead substitute.

Ecomass® compound 4703ZC76 is a stainless steel-filled thermoplastic polyurethane compound that is recommended to be used in weighting, balancing and vibration dampening applications. This injection molding grade is known for its good toughness and flexibility. Additionally, it functions as a nontoxic thermoplastic lead substitute.

Ecomass® compound 1007TU78 is a tungsten powder-filled polyether block amide compound that is recommended to be used in applications requiring weighting, balancing, and radiation shielding. This injection molding grade is known for its high specific gravity, superior toughness, and flexibility. Additionally, it is a nontoxic lead-substitute thermoplastic.

Ecomass® compound 4703ZC57 is a stainless steel-filled thermoplastic polyurethane compound that is recommended to be used in weighting, balancing and vibration dampening applications. This injection molding grade is known for its excellent toughness, and flexibility. Additionally, it functions as a nontoxic thermoplastic that can substitute lead.

Ecomass® compound 1002ZC85 is a stainless steel powder-filled co-polyamide compound that is recommended to be used in applications that require weighting, balancing, and vibration dampening. This injection molding/extrusion grade is known for its high specific gravity, superior toughness, and flexibility. Additionally, it is a nontoxic lead substitute thermoplastic.

Ecomass® compound 4703TU95 is a tungsten-filled thermoplastic polyurethane compound that is recommended to be used in weighting, balancing and radiation shielding applications. This injection molding grade is known for its high specific gravity, excellent toughness, and flexibility. Additionally, it functions as a nontoxic thermoplastic that can substitute lead.

Ecomass® compound 1080ZB92 is a filled polyamide alloy that is recommended to be used in radiation shielding applications. This injection molding grade material is known for its excellent toughness and rigidity. Additionally, it functions as a nontoxic thermoplastic that can substitute lead.

Ecomass® compound 4703BI74 is a filled thermoplastic polyurethane compound that is recommended to be used in radiation shielding applications. This injection molding grade is known for its excellent toughness, and flexibility. Additionally, it functions as a nontoxic thermoplastic that can substitute lead.

Ecomass® compound 5033ZC87 is a stainless steel-filled styrene isoprene styrene block co-polymer compound that is recommended to be used in weighting, balancing and vibration dampening applications. This injection molding grade is known for its high specific gravity, excellent toughness and flexibility. Additionally, it functions as a nontoxic thermoplastic lead substitute.

Ecomass® compound 1850ZN66T1 is a steel powder-filled polyamide compound that is recommended to be used in weighting and balancing applications. This injection molding grade is known for its good toughness, and rigidity. Additionally, it is a nontoxic thermoplastic that can substitute lead.

Ecomass® compound 1700ZC89 is a stainless steel powder-filled polyamide compound that is recommended to be used in weighting and balancing applications. This injection molding grade is known for its high specific gravity, good toughness, and rigidity. Additionally, it is a nontoxic thermoplastic that can substitute lead.

Ecomass® compound 4703BI62 is a filled thermoplastic polyurethane compound that is recommended to be used in radiation shielding applications. This injection molding grade is known for its excellent toughness, and flexibility. Additionally, it functions as a nontoxic thermoplastic that can substitute lead.

Ecomass® compound 1050ZB92 is a filled polyamide alloy that is recommended to be used in radiation shielding applications. This injection molding grade material is known for its excellent toughness and rigidity. Additionally, it functions as a nontoxic thermoplastic that can substitute lead.

Ecomass® Compound 1700TU96 is a high density tungsten powder-filled polyamide compound that is recommended to be used in weighting, balancing and radiation shielding applications. This injection molding grade is known for its high specific gravity, excellent toughness, and rigidity. Additionally, it is a nontoxic thermoplastic that can substitute lead.

Ecomass® compound 720ZD88 is a tungsten powder-filled acrylonitrile butadiene styrene compound that is recommended to be used in weighting, balancing and radiation shielding applications. This injection molding grade is known for its good toughness, pleatability and rigidity. Additionally, it functions as a nontoxic thermoplastic lead substitute.

Ecomass® Compound 1850TU96 is a high-specific-gravity, tungsten powder-filled polyamide (PA6) compound that is rigid. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) and is used for weighting, balancing, and radiation shielding applications.

Liqcreate Premium Model is perfect for manufacturing dental models and aligners models. This photopolymer is a matte, opaque skin/peach-colored dental resin. Its matte color accentuates depth and detail in your dental model, which accommodates a perfect view of undercuts in 3D-printed models. Its good temperature resistance supports vacuum forming for aligner manufacturing.3D-printed parts from this material have exceptional dimensional stability and low shrinkage during printing. Premium Model and printed objects of Premium Model should not be used for applications inside the human body. Liqcreate Premium Model prints fast and is easy to use on open MSLA/LCD and DLP 3D printers in the range of 385 - 420nm.

Liqcreate Composite-X is an extremely rigid and high-performance reinforced nano-micro composite resin for SLA, DLP & LCD/MSLA in the range of 385 - 420nm. Perfect for rapid tooling, wind tunnel testing, and industrial applications.Liqcreate Composite-X is one of the stiffest and strongest material available in the market. It has a flexural modulus of over 9000 MPa and flexural strength of 150 - 170 MPa. The material can be used after UV-post curing, or the properties can be boosted with a thermal cure. This material has features like excellent chemical resistance, high strength, and high stiffness.

Liqcreate Premium White is the most white and opaque photopolymer resin for 3D printing available. This white resin has excellent UV stability and is easy to print, which is ideal for medical models, architectural scale models, and lithophanes.Printed parts do not discolor and stay white, even after long-term UV exposure. Liqcreate Premium White can print fast and is easy to use on open MSLA/LCD and DLP 3D printers in the range of 385 - 420nm.

Liqcreate Dental Model Pro Gray is a matte, opaque gray-colored photopolymer. Its matte surface finish accentuates depth and detail in dental models, which accommodates a perfect view on undercuts and the surface is ideal for scan impressions. 3D-printed parts from this material have exceptional dimensional stability and low shrinkage during printing.Liqcreate Dental Model Pro Gray is easy to use on open SLA, MSLA, and DLP 3D printers in the range of 385 - 420nm. This material has excellent properties like low shrinkage and low odor, accuracy, and dimensional stability making it perfect for the production of dental models, C&B, thermoforming, and aligner models.

Moplen HP648N is a Antistatic and nucleated polypropylene homopolymer resin

Tygon R-1000 is a Polyvinyl Chloride product. It is available in North America. Typical application: Hose/Tubing.Characteristics include: Corrosion Resistant Low to No Odor/Taste

The Addisil™ 482 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

Defend Rx PA2000 is a PEBA Antimicrobial Masterbatch, 4wt.% LDR.

Neoplast™ 163 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

The Addisil™ IND 1080 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

Neoplast™ 173 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Fun To Do Industrial Blendhas been developed especially for some industrial clients who were in need for a resin that is extra hard and would maintain its structural integrity while exposed to very Low and High temperatures. Because of these properties it is one of the few resins perfectly suitable for vulcanisation molding. For relatively low temperature metals like pewter or tin you can also use the Industrial Blend to print your molds and cast straight from the printed mold. Read all about it in this Instructable ​The hardness of the fully cured resin is 75 shore D. It has been tested to keep its dimensional properties from -45C to +225C.

Neoplast™ 180 HOFR are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

J-560S is a nucleated random copolymer for injection molding applications. This grade is designed to be processed in conventional injection molding equipment and offers super excellent transparency, good stiffness/impact strength balance, high gloss, high hinge property and low smell. J-560S is a ‘Phthalate-Free’ product.

Polyplastics Group Topas® 6015S-04Product DescriptionTOPAS 6015S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for optics, healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high (150°C) heat distortion temperature to withstand 121°C and 134°C steam and dry heat sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM) TOPAS 6017S-04 - our most heat distortion resistant IM grade (HDT=170°C) Topas® 6015S-04Topas® 6015S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Silopren™ LSR 4030 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4030 can be used to produce medical technical articles with high transparency and excellent rubber like properties.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 4030 are distinguished by the following properties: high stability to ozone and ultraviolet light neutral odor and taste sterilisable with ethylen oxide, steam and gamma radiation good transparency high thermal stability high recovery after puncture easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4030 is particularly suitable for the following elastomeric articles: sealing elements, O-rings, diaphragms, bellows, catheters, baby teats, respiratory devices, vibration dampers, mats, parts for medical technical equipments.

Polyplastics Group Topas® 8007S-04Product DescriptionTOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 - our highest ultraviolet (UV) transmission grade Topas® 8007S-04Topas® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

The Addisil™ 450 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

Fun To Do Snow White Classic is the first resin in this market segment that is white, and stays white! It has a milky white color, which makes it an ideal resin for printing architectural designs or other designs where white is the predominant color. Combine Snow White with pigments from our pigment set to create any pastel color you like.

S80U is a high transparency grade of silicone rubber intended for use in food, dairy, brewing, potable water, pharmaceutical and biomedical applications. Platinum-cured silicone is odorless, tasteless and non toxic. Seals made from S80U are resistant to repeated sterilizing, autoclaving and cleaning agents commonly used in these industries.Unlike traditional peroxide-cure methods, platinum curing results in a smooth contact surface finish and a high degree of purity. No residue substances such as benzoic acid, peroxides, ketones are produced during manufacturing, which can be transferred from the seal to critical hygienic products.Key Attributes FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI <88> and USP <87> compliant 3A Sanitary Standard 18-03 Class 1 compliant. Formulated to BS2494 Type ‘W' and (Water Regulations Advisory Scheme WRAS - formerly Water Research Council WRC) in accordance with BS6920. Approval No. 0005509. BGV XV compliant. Good mechanical and physical properties Chemically stable over a temperature range of -60°C to +200°C. Withstands sterilizing and autoclaving procedures Free from Animal Derived Ingredients (ADI) Typical Applications Food processing and packaging equipment Pharmaceutical and biomedical apparatus Hygienic seals in dairy equipment Potable and high-purity water applications