Products in Medical Devices & Assemblies

Hexamoll® DINCH functions as a non-phthalate plasticizer ideal for PVC and other polar polymers, especially in applications involving close human contact. Its clear, colorless, and almost odorless liquid composition makes it practically anhydrous. This plasticizer exhibits compatibility with common organic solvents, as well as other monomeric plasticizers used in PVC, while being nearly insoluble in water.

SILPURAN® 6400/40 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6400 exhibits excellent tear resistance measured according to ASTM D 624 B and DIN ISO 34-1 method A (DIN 53507). SILPURAN® 6400/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 3003/80 US A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003/80 US A/B series. It is a paste-like, easily pigmentable two-component compound noted for its high transparency, excellent mechanical and electrical properties, and ability to be molded into intricately shaped, precision parts. It is used for health care applications, including short-term implants. Very brief molding cycles for intricately shaped and flash-free parts are possible.

SILPURAN® 6700/60 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Vulcanizates are noted for their self-adhesive properties on various substrates. SILPURAN® 6700/60 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SILPURAN® 6700/40 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Its vulcanizates are noted for their self-adhesive properties on various substrates. SILPURAN® 6700/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 5040/70 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required post-cure. Articles made from ELASTOSIL® LR 5040/70 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

SILPURAN® 6400/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6400 exhibits excellent tear resistance measured according to ASTM D 624 B and DIN ISO 34-1 method A (DIN 53507). SILPURAN® 6400/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6600/40 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. Compared to the SILPURAN® 6000 series, the coefficient of friction of a post-cured article made of SILPURAN® 6600 is reduced by 50–70%. SILPURAN® 6600/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6000/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6000/30 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/30 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6000/40 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6000/05 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/05 A/B is designed for medical applications in compliance with Wacker Silicones' health care policy. Please note that this material has use restrictions according to Wacker Silicone's health care policy. In particular, contact with body tissue or blood is not permitted.

SILPURAN® 6610/50 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam ( 75 kGy). SILPURAN® 6610/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6610/40 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam (≤ 75 kGy). SILPURAN® 6610/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6000/10 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/10 A/B is designed for medical applications in compliance with Wacker Silicones' health care policy. Please note that this material has use restrictions according to Wacker Silicone's health care policy. In particular, contact with body tissue or blood is not permitted.

SILPURAN® 6600/60 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. Compared to the SILPURAN® 6000 series, the coefficient of friction of a post-cured article made of SILPURAN® 6600 is reduced by 50–70%. SILPURAN® 6600/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6000/60 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6740/40 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber compound with a short curing time. Vulcanizates are noted for their self-adhesive properties on various substrates and excellent mechanical properties. SILPURAN® 6740/40 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SILPURAN® 6700/50 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Vulcanizates are noted for their self-adhesive properties on various substrates. SILPURAN® 6700/50 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SILPURAN® 6000/20 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/20 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6610/60 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam (≤ 75 kGy). SILPURAN® 6610/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® AUX 8251 RO is a white, barium sulfate-containing batch that is used as a radio-opaque additive for addition-cured high-consistency silicone rubber. SILPURAN® AUX 8251 RO is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 5040/40 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/40 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

ELASTOSIL® LR 5040/20 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/20 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

ELASTOSIL® LR 5040/45 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/45 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

ELASTOSIL® LR 34004/50 A/B is a paste-like, white, two-component liquid silicone rubber with a very short curing time. Vulcaniates are noted for their radio-opaqueness. ELASTOSIL® LR 34004/50 A/B contains barium sulfate as a radio-opaque additive, which meets the requirements of the US and European Pharmacopeia.

ELASTOSIL® LR 5040/60 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required post-cure. Articles made from ELASTOSIL® LR 5040/60 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

ELASTOSIL® LR 5040/50 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/50 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

SILPURAN® 6760/50 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Vulcanizates are noted for their self-adhesive properties to various substrates combined with a low coefficient of friction. SILPURAN® 6760/50 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SILPURAN® 6000/70 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/70 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 5040/30 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/30 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

SILPURAN® 6600/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. Compared to the SILPURAN® 6000 series, the coefficient of friction of a post-cured article made of SILPURAN® 6600 is reduced by 50–70%. SILPURAN® 6600/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® AUX 8250 RO is a white, barium sulfate-containing batch that is used as a radio-opaque additive for peroxide-cured high-contrast silicone rubber. SILPURAN® AUX 8250 RO is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SILPURAN® 6400/60 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6400 exhibits excellent tear resistance measured according to ASTM D 624 B and DIN ISO 34-1 method A (DIN 53507). SILPURAN® 6400/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 3003/70 US A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound. It is noted for its high transparency, excellent mechanical and electrical properties, and ability to be molded into intricately shaped, precision parts. This series is used for health care applications, including short-term implants. Very brief molding cycles for intricately shaped and flash-free parts are possible.

VESTAMID® D18 is a medium-viscosity polyamide 612 compound that is specifically designed for extrusion and injection molding processes. It is commonly used for applications such as monofilaments, including toothbrush bristles. The material exhibits low water absorption, which contributes to the exceptional dimensional stability of components even when exposed to varying ambient humidity conditions. VESTAMID® D18 is suitable for profile extrusion processing techniques.