Products in Medical Devices & Assemblies: Soft

ELASTOSIL® P 7676 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.

MD Graphene Neo TPU Pellets are made up of Graphene Nanofiber Reinforced Thermoplastic Polyurethane which creates a nanostructure or skeleton that increases the density of the material. It is a low-temperature flexible thermoplastic, very soft, and impact-resisting material.

TPE-S, Shore A45, modified for good adhesion to polyamides such as PA6, PA66, PA612 or partially aromatic PA types such as GRIVORY GV (manufacturer EMS-GRIVORY). KEBAFLEX - H / SPA1 40 A.02 black is UV-resistant and therefore also suitable for outdoor applications, for example in the automotive sector.

Elastocon® STK40B is a black thermoplastic elastomer that has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK40B is well suited for consumer goods and industrial applications requiring non-slip/soft dry-touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK40B can be overmolded to PC, ABS, PC/ABS, Acrylic, PS, copolyester, various grades of polyamide, and more.Elastocon® STK40B is supplied as ready to use pellets in 50 lb. bag quantities.

Neoplast™ 173 C are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family designed for use in medical applications.

TPE-S, Shore A68, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY).

TPE-S, Shore A54, modified for good adhesion to polyamides such as PA6, PA66, PA12 or partially aromatic PA types such as e. g. GRIVORY GV (manufacturer EMS-GRIVORY)

Neoplast™ 163 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 163 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

TPE-S, Shore A75, black, modified for good adhesion, etc. ABS and PMMA.

BARLOG plastics GmbH Kebaflex® / FE 170403 is a TPE-S, Shore A85, modified for good adhesion to various polyamides such as PA6, PA66, PA6.12, etc. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

Poly Chem Alloy FlexPlast 4005D is a plastic material that combines the processing advantages of a thermoplastic with the properties and performance of a rubber-like material. The product is a soft, flexible, highly elastic material that can be custom formulated to perform in a variety of processes, including injection molding, extrusion, blow molding, and thermoforming. These lower modulus, flexible materials can typically be stretched repeatedly, only to return to their original shape when relaxed. When heated, FlexPlast will soften until it flows, making it suitable for formation into complex shapes using standard thermoplastic processing equipment.

TPE-S, Shore A75, modified for good adhesion to polycarbonate

Neoplast™ 180 C are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

TPE-S, Shore A60, natural, modified for good adhesion to ABS, PC and ABS / PC blends

Neoplast™ 155 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family designed for use in medical applications.

BARLOG plastics GmbH Kebaflex® / SG 85 HT A.01 is a TPE-S, Shore A85, with improved compression set at high temperatures. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A55, black, modified for good adhesion, etc. On ABS, PC and PC / ABS blends.

Elastocon® STK60 thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK60 is FDA compliant and well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK60 can be overmolded to polycarbonate, ABS, PC/ABS, Acrylic, PS, and various grades of polyamide/nylon.Elastocon® STK60 is supplied as ready to use pellets in 50 lb. bag and 1000 lb. bulk quantities.

TPE-S, Shore A67, natural, modified for good adhesion, etc. On ABS, PC and PC / ABS blends, compliant for food contact according to EU 10/2011.

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family designed for use in medical applications.

Poly Chem Alloy FlexPlast 4092D is a plastic material that combines the processing advantages of a thermoplastic with the properties and performance of a rubber-like material. The product is a soft, flexible, highly elastic material that can be custom formulated to perform in a variety of processes, including injection molding, extrusion, blow molding, and thermoforming. These lower modulus, flexible materials can typically be stretched repeatedly, only to return to their original shape when relaxed. When heated, FlexPlast will soften until it flows, making it suitable for formation into complex shapes using standard thermoplastic processing equipment.

Neoplast™ 173 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 173 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

TPE-S, Shore A79, natural, modified for good adhesion, etc. On PBT and PBT blends. KEBAFLEX - H / SPBT 70 A.02 natural was developed specially for use outdoors (UV stabilization) and has an optimized demolding behavior.

TPE-S, Shore A55, modified for good adhesion to adhesion-modified polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

TPE-S, Shore A55, natural, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

Poly Chem Alloy FlexPlast 3804E is a plastic material that combines the processing advantages of a thermoplastic with the properties and performance of a rubber-like material. The product is a soft, flexible, highly elastic material that can be custom formulated to perform in a variety of processes, including injection molding, extrusion, blow molding, and thermoforming. These lower modulus, flexible materials can typically be stretched repeatedly, only to return to their original shape when relaxed. When heated, FlexPlast will soften until it flows, making it suitable for formation into complex shapes using standard thermoplastic processing equipment.

SARANEX® 650G is a coextruded barrier film designed for fabrication into ostomy pouches.

Clearflex® CL B0 is a linear low density polyethylene, with antioxidants, characterized by a very low density (VLDPE).The resin has a high stretchability and a good cling effect.Main ApplicationClearflex CL B0 is recommended for applications in which soft touch and flexibility are required, for the improvement of impact resistance when used as additive in blend with other polyolefins formulated with or without mineral fillers. Clearflex CL B0 is also used as cling agent in stretch film.

A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family designed for use in medical applications.

Poly Chem Alloy FlexPlast 3905E is a plastic material that combines the processing advantages of a thermoplastic with the properties and performance of a rubber-like material. The product is a soft, flexible, highly elastic material that can be custom formulated to perform in a variety of processes, including injection molding, extrusion, blow molding, and thermoforming. These lower modulus, flexible materials can typically be stretched repeatedly, only to return to their original shape when relaxed. When heated, FlexPlast will soften until it flows, making it suitable for formation into complex shapes using standard thermoplastic processing equipment.

Neoplast™ 180 HOFR are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.