Products in Tubing & Fluids Handling

Paracril OZO3341 is a pre-fluxed blend of NBR/PVC containing 30% PVC and 28% BAN NBR base polymer.

Fainplast Compounds Fainplast™ PVC MPH 69/H is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 69/H include hose/tubing and medical/healthcare.

LIM™ 6040-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6040-D2 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds The combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

Fainplast Compounds Fainplast™ PVC MPH 80 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 80 include medical/healthcare and hose/tubing.

Elastocon® STK60B black thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK60B is well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics, sound and vibration dampening, improved impact resistance, and U.V. stability. Elastocon® STK60B can be overmolded to polycarbonate, ABS, PC/ABS, Acrylic, PS, and various grades of polyamide/nylon.Elastocon® STK60B is supplied as ready to use pellets in 50 lb. bag quantities.

Fainplast Compounds Fainplast™ PVC MPH 62/T is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 62/T include engineering/industrial parts, hose/tubing and medical/healthcare.

Hairma Chemical (GZ) Epoxidized Soybean Oil (Medical Grade) HM-01AD is a chemical product made from soybean oil after oxidation treatment. It is a light yellow viscous oily liquid at room temperature. It is a widely used PVC non-toxic plasticizer and stabilizer: and PVC The resin has good compatibility, low volatility and low migration. It has excellent thermal and light stability, water and oil resistance, and can give products good mechanical strength, weather resistance and electrical properties, and is non-toxic. It is an internationally recognized chemical process aid for food packaging materials .

Elastocon® 8078B is a black thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8078B is well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8078B can be overmolded to polypropylene.Elastocon® 8078B is supplied as ready to use pellets in 1000 lb. quantities.

LIM™ 6050-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors. LIM6050-D2 offers convenient 1:1 mix ratio, high tear strength, and easy release from molds. Cure time is rapid, generally 10 to 40 seconds (@ 150-205°C) depending upon part size, configuration, and molding temperature.Key Features and BenefitsLIM6050-D2 liquid silicone rubber is distinguished by the following properties: High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

BROMOBUTYL RUBBER is obtained by bromination of butyl rubber with unsaturation of minimum 1.5 mol%

This product is a polyurethane system. Mechanical data according to test pieces post-cured for 8 hrs. at 80°C. No heavy chemical and mechanical stress before 7 days after curing at room temperature (20-23°C).

The Addisil™ 450 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

Elastocon® 8078NL is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a scratch and mar resistant surface finish. Elastocon® 8078NL is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8078NL can be overmolded to polypropylene.Elastocon® 8078NL is supplied as ready to use pellets in 1000 lb. quantities.

Polyplastics Group Topas® 8007S-04Product DescriptionTOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 - our highest ultraviolet (UV) transmission grade Topas® 8007S-04Topas® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Tufel™ II 94506 are 40-70 durometer low volatile fast-cure addition cured silicone elastomers for extrusion and calendering. They may be used by themselves or blended to intermediate durometers. Applications include extruded tubings, profiles and calendered sheets.Key Features and Benefits LV Bases Minimize Porosity and Post Cure Totally Peroxide-Free Cure System Broad Processing Window High Output Rates High Tear Strength Tight Surface Cure Non-blooming Translucency.

Elastocon® CLR45 by Elastocon TPE Technologies is comprised of Thermoplastic Elastomer (unspecified). It is commonly used as Extrusion Resin and Molding Resin for a variety of applications. It is available in Pellets form.

MARFRAN.MED® A HE has a high versatility to satisfy every request, all materials can be colored and available in transparent or crystal, suitable for both production by injection molding and for extrusion.

PermaFelx® 45 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

GRP BUTYL RECLAIM GRP BRI85 is made from used butyl tubes. When incorporated in recipe provides faster mixing & extrusion, reduced power consumption. It is best suited for inner tubes, tire inner liner, adhesives, cable compound. Butyl rubber is a synthetic rubber, a copolymer of isobutylene with isoprene. Generally it’s called as IIR. It stands for isobutylene isoprene rubber. Butyl rubber is impermeable to air and used in many applications requiring an airtight rubber. The first major applications of butyl rubber are tire inner tubes and Inner Liner. Some other applications are adhesives, bladders, sealants and chewing gum.

Fainplast Compounds Fainplast™ PVC MPH 50/T is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 50/T include engineering/industrial parts, hose/tubing and medical/healthcare.

TAIC 50 and 70 are 50 % resp. 70 % preparations of triallylisocyanurate (TAIC) on extremely fine silica as carrier in powder form. TAIC can be recommended especially as co-activator for peroxide curing, when excellent physical properties are to be reached, especially very low compression-set values even after aging and under extreme conditions.

Sylvin Technologies Sylvin™ 5132-75UV Clear Green 3182 is a clear vinyl compound formulated for wire insulating applications such as speaker wire, booster cable, and extruded tubing. This compound contains an ultra violet stabilizer.

The Addisil™ 460 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

Talcubex is a non-dusting talc which is treated with Kettlitz-Haftubex in such a manner that the fine dust-causing particles of talc are bound. It is still an almost free-flowing powder which provides an excellent coating on rubber compounds, batches and profiles.

Zeus Industrial Products Reinforced Polyimide Tubing is a class of high performing polymers well established in industry for their outstanding chemical, thermal, and mechanical performance properties. Polyimides also exhibit good dielectric properties giving them substantial presence in a number of electrical applications. Zeus polyimide tubing brings these properties and more for both medical and non-medical precision tubing applications. Polyimide tubing provides excellent strength and abrasion resistance. Polyimide tubing also maintains its properties even at very small dimensions. For applications where additional lubricity is needed, PI Glide™, a PI / PTFE composite, provides a lower coefficient of friction for reduced surface resistance of the tubing. For applications that require enhanced torque, flexibility, strength, pushability, kink resistance, or burst resistance, reinforced polyimide tubing is available. Zeus reinforced polyimide tubing can be produced in full load and half load braid patterns, with various PPI (pick per inch) depending on your specifications. Lower braid densities (low PPI) result in increased pushability, while higher braid densities (high PPI) result in increased flexibility and steerability. Reinforced polyimide tubing is also available in coil configurations with various WPI (wraps per inch) to meet your requirements.

The Addisil™ IND 1080 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

Paracril OZOM50 is a pre-fluxed blend of NBR/PVC containing 30% PVC.

Epoxidized soybean oil/ESBO can be used in most products of polyvinyl chloride, such as all kinds of food package materials, medical products, different kinds of films, sheet materials, tubing, sealing strip of refrigerator, artificial leather, plastic wallpaper, electrical wires and cables and other commodity plastic products .It also can be used as special

Elastocon® 8068N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8068N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8068N can be overmolded to polypropylene.Elastocon® 8068N is supplied as ready to use pellets in 50 lb. bag and 1000 lb. box quantities.

Trelleborg Industries UK PEEK is a good choice for applications where fluid compatibility is a concern. It is virtually inert and has good mechanical properties, providing low friction and wear. High strength, toughness and biocompatibility make PEEK ideal for many medical device applications.

Manifattura Cattaneo PVDF is a Non-toxic semi-crystalline thermoplastic with high chemical resistance. Suitable for contact with food.

Polyplastics Group Topas® 6015S-04Product DescriptionTOPAS 6015S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for optics, healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high (150°C) heat distortion temperature to withstand 121°C and 134°C steam and dry heat sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM) TOPAS 6017S-04 - our most heat distortion resistant IM grade (HDT=170°C) Topas® 6015S-04Topas® 6015S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Nylene General purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 481°F - 500°F at the die

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

Rubaloy RA - 7380 is a non-staining, oil, ozone, abrasion, weather and flex resistant polymer using medium ACN (33%) content Acrylonitrile Butadiene Rubber and a special grade of Poly Vinyl Chloride Resin. This grade has improved Tensile, Elongation, Compression Set, Oil Swelling and Processibility.

Cardia Compostable™ B-M is a biodegradable and compostable resin based on a blend of thermoplastic starch (TPS), biodegradable polyesters and natural plasticizers. This grade of resin is compatibilised to offer a high level of mechanical strength, impact resistance and toughness. The resin is based on corn starch which is a renewable material. It is a biodegradable and compostable resin, greater than 98% biodegradability when tested to ISO14855 designed to be used for injection molding and profile extrusion.