Products in Tubing & Fluids Handling

Paracril OZO3996 is a pre-fluxed blend of NBR/PVC containing 40% PVC.

High viscosity grade ISO 9988-1: POM-K, M-GNR, 01-002

Oxy Vinyls 216 is an anti-stat treated resin designed for rigid applications.

EPOXOL® 7 - 4 is a bio-based high oxirane epoxidized soybean oil (ESO). Our unique manufacturing process produces an exceptional ESO.

Actigran 50 and 70 are 50 % resp. 70 % preparations of trimethylolpropantrimethacrylate (TRIM) bound to inert carries in granular form. The use of Actigran 50 or 70 normally increases the cross-linking density of cured rubber compounds

Mediaplast 60 is a highly effective chemical peptizer for natural and Isoprene rubber, based on the well-known dibenzamidodiphenyldisulfide (DBD). However, it does contain an activator/catalyst system which enables the product to show superior efficiency in comparison to the products you find on the market today.

TUFFALLOY 4270 is a series of Liquid Molding Compounds with thermoplastic properties such as high impact, high heat distortion, and low viscosity. This unique chemistry developed by Hapco to meet today's market demands for prototype and low production parts needs.THE TUFFALLOY 4270 Series are available in (4) speeds.The user has the ability to use different speeds of TUFFALLOY 4270, typically using a slower speed initially and increasing to a fast set, 1 minute working life.PROCESSING: TUFFALLOY 4270 Series can be pressure cast, vacuum cast, or open cast. For best results, TUFFALLOY 4274/75 should be used with Hapco's metering/dispensing equipment, RAPIDFIL, MINI FIL, and RAPIDSHOT.

LIM™ 6041 liquid silicone rubber is a 2 component Radio - Opaque product formulated with Barium Sulfate. It is used in liquid injection molding of high performance elastomeric parts. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications in medical devices where molded parts can be detected under X-ray due it's radio opacity.Key Features and Benefits Barium Sulfate filled for excellent radio - opacity Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 1500C (3020F) to 2050C (4000F) Excellent release from metal molds Potential ApplicationsThe combination of excellent tear strength and radio - opacity, it is suitable for applications in medical devices such as wound drain catheters, where molded parts can be detected under X-ray.

TAIC 50 and 70 are 50 % resp. 70 % preparations of triallylisocyanurate (TAIC) on extremely fine silica as carrier in powder form. TAIC can be recommended especially as co-activator for peroxide curing, when excellent physical properties are to be reached, especially very low compression-set values even after aging and under extreme conditions.

Antitack NP-97 is a Pure zinc stearate dispersion of small particles, developed especially for dip tank equipment. The stearate particles are only partially hydrophobic due to the special production process. Therefore the antitack agent within the dilution shows the tendency to rise to the upper third of the dip tank. While the compound leaves the dip tank, it passes through the region of highest concentration and gets the optimum coverage of an-titack agent.

Mediaplast PX-2 is a semi-synthetic plasticizer based on long-chain hydrocarbons with paraffinic character. It is recommended to use in elastomers with low polarity, e. g. NR, IIR, BR, SBR and EPDM.

Elastocon® OF75 by Elastocon TPE Technologies is comprised of Thermoplastic Elastomer (unspecified). It is commonly used as Extrusion Resin and Molding Resin for a variety of applications. Elastocon® OF75 is certified as FDA. It is available in Pellets form.

Trelleborg Industries UK PVC is available in rigid and flexible forms. PVC can be extruded in a wide range of durometers and colors to meet virtually any need. Medical grade PVC tubing is resistant to many chemicals, solvents, corrosion and has a long life expectancy. It is also resistant to most sterilization methods. It’s extremely smooth surface provides maximum fluid flow characteristics, reducing sediment build up which could lead to bacterial growth.

Silanogran Silanogran SI-69/GR 70 offers improvement of mixing properties e. g. reduction in Mooney viscosity, better processability when mixing, calendering and extruding and influences the physical-mechanical data of the vulcanizates favorably.

Dellit® PF CP 21 T is composed of phenolic resin and paper reinforement.

Tygon B-44-4X is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon B-44-4X include food contact applications, hose/tubing and plumbing/piping/potable water.Characteristics include: Low to No Odor/Taste Chemical Resistant Clarity Good Flexibility Non-Toxic

Fainplast Compounds Fainplast™ PVC MPH 64 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 64 include medical/healthcare and hose/tubing.

Fainplast Compounds Fainplast™ PVC MPH 62/OP is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 62/OP include medical/healthcare, engineering/industrial parts and hose/tubing.

Black 6686 is an economy black LDPE based masterbatch containing high opacity carbon black.This product is designed for general-purpose extruded tubings,sheets and film blowing.

Haftolat or the dry form, Haftolat/P, are very effective process aids produced from EPM rubber. I

Miracll Chemicals E 85 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Kureha Corporation KF 2950 PVDF homopolymer is a medium viscosity PVDF resin typically processed by extrusion offering: excellent chemical resistance at ambient and elevated temperatures; inherent UV stable; mechanical toughness; and, excellent abrasion resistance.

Silopren™ LSR 2665 by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used as Molding Resin for a variety of applications in Aerospace, Automotive and Aviation. It is available in Liquid form.

Miracll Chemicals E 175D is a polyester-based thermoplastic polyurethane used for wide variety of applications.

GREENSTAB® MC-100 is used by PVC Pipe Manufacturers,PVC Accessories Manufacturers,PVC Cable Manufacturers.

The Addisil™ 2080 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits Good transparency, no yellowing Good mechanical performance Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf life of 6 months for the single components if stored appropriatelyM Very long pot life of 2 to 4 weeks for the mixed components Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations KTW: German Water Regulation. A representative sample has passed the test for tubes, fittings, seals and strorage systems (cold and warm) WRAS (BS 6920). A representative sample has passed the test (cold and warm) W270: Microbiological growth test. A representative sample has passed the test.

Elastocon® SMR1450 by Elastocon TPE Technologies is comprised of Thermoplastic Elastomer (unspecified). It is commonly used as Extrusion Resin and Molding Resin for a variety of applications. Elastocon® SMR1450 is certified as RoHS Compliant. It is available in Pellets form.

Miracll Chemicals E 155D is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Miracll Chemicals E 95 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

The Addisil™ 442 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

Mediaplast EV/F is an effective processing aid for the treatment of very sticky polymers, mainly EVA compounds. EVA types with a vinyl acetate content of more than 40 % tend to stick to open mills, internal mixers and even extruder screws.

Elastocon® 3360 is a white S-B-S thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 3360 is heat sealable and well suited for consumer goods and extruded tubing and profile applications. Elastocon® 3360 can be overmolded and/or coextruded onto polystyrene.Elastocon® 3360 is supplied as ready to use pellets in 50 lb. bag quantities.

Mediaplast AT is a very effective process aid to improve flow properties and to reduce the tackiness of rubber compounds regardless of the polymer used. Processing of CR and ACM compounds in par-ticular is significantly improved by adding a small amount of Mediaplast AT. It improves the demolding properties of technical rubber parts. The sticking of uncured compounds to internal mixers, open mills and conveyor belts will be visibly diminished by the use of Mediaplast AT.

Fainplast Compounds Fainplast™ PVC MPH 78 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC MPH 78 include medical/healthcare and hose/tubing.

Tygon F-4040-A is a Polyvinyl Chloride product. It is available in North America. Applications of Tygon F-4040-A include engineering/industrial parts and hose/tubing.Characteristics include: Good Flexibility Low to No Odor/Taste

Modified nylon 6 with very good physical properties and excellent extrusion characteristics to support extrusion of very complex profiles Especially useful for convoluted tubing