Brands in Industrial

High-performance lubricants, engine oils, additives, gear oils for automatic and manual transmissions, hydraulic oils, greases, vehicle care products, radiator antifreeze/ antifreeze, brake fluids, winter protection chemicals, also for racing use. Our synthetic, semi-synthetic and mineral oils, as well as our entire range set standards in quality, performance and safety. Innovative ultimate quality for your vehicle.

Elite goals are to develop products that allow the chemist to formulate environmentally friendly inks, coatings and adhesives; not just for conventional UV/EB markets but also for new applications where solvent based systems are currently used. Working closely with the formulator Univar have developed a range of “Elite” oligomers that impart unique physical characteristics to both the cured and uncured film which has enabled UV/EB technology to be used in areas that would never have been considered a few years ago.

VOXCO Pigments take the pleasure to introduce the new range lead free replacement product for the both decorative & industrial application

Our Bio Polyols are high quality bio based polyols synthesized using renewable materials such as natural oils. The best use for these polyols is the production of rigid polyurethane foams for thermal insulation application. Our Bio Polyols have high bio carbon content: 70% - 83%. Our Bio Polyols are available in a wide range of hydroxyl values and viscosities. Our Bio Polyols (TT) contain tertiary amine groups, making them autocatalytically active. By using these polyols it is possible to decrease the needed catalyst amount in a polyol composition. The advantage over other polyols is that hydroxyl groups in our Bio Polyols are up to 100 % primary. This means a 3x faster reaction than polyols with secondary hydroxyl groups. Our method of Bio Polyol production insures that all carboxylic compounds in natural oils are transferred into polyols while the other common method of polyol synthesis from natural oils is the epoxidation of double bonds, which introduces hydroxyl groups only to the unsaturated residue in the oils.

DETERGENT 8 is a nonionic, phosphate-free homogeneous blend of an alkanolamine, glycol ethers and an alkoxylated fatty alcohol. Contains no chelating agents, halides or conductive metal cations such as sodium.

With a full range of features and benefits, Super Lube® products are the single source solution for a broad spectrum of lubrication applications. The choice for ultimate protection is clear.

DISPERAL is the trademark for Sasol's high-purity, highly dispersible boehmite powders and sols/dispersions manufactured in Brunsbüttel, Germany.These boehmites, which are nano-sized in the dispersed phase, exhibit a unique combination of purity, consistency and dispersibility that make them excellent materials for use in colloidal applications.The Sasol range of dispersible boehmites has traditionally been used in applications such as sol-gel ceramics, catalysis, refractory materials, rheology control and surface frictionizing.Other applications include surface coating as well as paint detackification, polymeradditives and functional fillers.This portfolio is complemented by additional products trademarked under the name DISPAL, which are produced by Sasol in Lake Charles, Louisiana, USA.

C.E.D. Cristobalite is synthesized from high purity quartz using a proprietary solid state, high heat manufacturing process. As such, not all synthetic Cristobalite products are created equal. Some products are partially converted to Cristobalite and therefore contain substantial amounts of quartz and glass. Other products are manufactured using mineralizers that can affect physical and chemical properties. C.E.D. Process Minerals C-1 Cristobalite is fully converted without the use of mineralizers.

The VINNAPAS® eco product line stands for polymer dispersions, dispersible polymer powders and solid resins derived from renewable raw materials via the biomass balance approach. VINNAPAS® eco grades are chemically identical to the corresponding basic VINNAPAS® products. VINNAPAS® eco dispersions, dispersible polymer powders and solid resins are manufactured using the biomass balance approach. This means that fossil raw materials are entirely replaced in the supply chain by renewable raw materials that are certified as sustainable. WACKER uses bio-based acetic acid that is a byproduct of the wood-processing industry and is certified as sustainable by PEFC® (Program for the Endorsement of Forest Certification). The bio-based acetic acid is introduced at the beginning of the production cycle. The biomass balance approach mathematically determines the percentage of dispersions, dispersible polymer powders and solid resins made from renewable (non-fossil) raw materials. VINNAPAS® eco grades are certified to the REDcert2 standard and audited by TÜV NORD, an independent German technical inspectorate.

Used in the production of high-quality products, the applications of Fatty Alcohols range from detergents, surfactants, cosmetics, and industrial solvents.Naturally derived from Palm Oil and Palm Kernel Oil, we offer fatty alcohols with chain lengths ranging from C8 to C18.Short Chain Alcohols – C8, C810, C10Mid Cut Alcohols – C12, C1214, C1216, C1218, C14Long Chain Alcohols – C16, C1618 (30:70, 50:50, 70:30), C18We offer the Mid Cut Alcohols ex-tank in Europe and the US and thus have the capability to meet global supply chain requirements. For the long-chain alcohols, we also provide the product in pastilles form. Fatty Alcohol trademark, MASCOL™, meets all the stringent specification requirements across various industries.Fatty Alcohols and their derivatives find application in various home and personal care applications like creams and lotions, detergents, shampoos, and toothpastes. In addition, they are very widely used in agriculture, crude oil exploration, emulsion polymerization, paints and coatings, perfumery chemicals, pharmaceuticals, pulp and paper, lubricants, and in the preparation of textile auxiliaries.

Hercolyn resin, a methyl ester of hydrogenated rosin, is a light amber liquid resinous tackifier and plasticizer. Being hydrogenated, it has marked resistance to aging.

#202 MOLY-LITH™ is a black, thermally stable, lithium 12-hydroxystearate soap grease containing microfine molybdenum disulfide (MoS2), antioxidants & rust inhibitors. #202 MOLY- LITH has a dropping point of 390°F (199°C), is water resistant and displays excellent work stability under high loads, high speeds, shock and vibration. Sub-micron particles of Molybdenum Disulfide, blended into the superior lubricating grease base, contribute to the good load carrying and low friction characteristics.

Anionic surfactants are negatively charged materials that are available in a variety of chemical types. The main classes being alkyl ether sulfates, alkyl sulfates, alkylbenzene sulfonates, alpha olefin sulfonates, phosphate esters. They are used in a wide range of applications where they provide useful characteristics including, emulsification, solubilisation, wetting, detergency, dispersion and foaming.

ORIBAIN™ is Toyochem's adhesives (pressure sensitive adhesives).

Brij™ is an ethoxylated natural fatty alcohol, based on oleyl alcohol chemistry. This naturally derived surfactant offers a number of functional benefits including wetting and high foaming to a variety of applications.

DREWPLAST® is a nonionic surfactant used as a release agent and anitstat for plastic and films.

https://www.creativechemistry.ca/

FMG™ is an aluminum complex grease lubricant of the USDA Authorized H-1 type. It meets or exceeds the requirements of FDA Regulations and is specifically designed for use in the food processing industry where it may have incidental food contact. FMG has been formulated to perform in a wide variety of operating conditions. It is extremely water resistant and will remain in place even after frequent wash downs. Polymer additives provide adhesive/cohesive strength to protect against pound-off when shock loads are encountered.

We have a bunch of additive products for various applications. They are Nucleating agents, Optical Brighters, Color developer, Curing, etc.

Silica-alumina hydrates (SIRAL) exhibit characteristics which differ significantly from pure aluminas. One of the key properties of silica-aluminas is their comparatively high level of surface acidity, making them useful catalyst support materials, for example in the field of refinery catalyst.

Ferrnsol specialty soaps, cleaners and lubricants provide solutions for a variety of markets. Our All- Natural Base Soaps are used by name brand and boutique liquid soap and cleaner manufacturers, customers looking for sustainably focused products and users of soap-based lubricants. Our specialty soaps & cleaners fill many niche markets including bulk all purpose cleaning needs, wire cleaning and welding antispatter. Ferrnsol Specialty Lubricants are used in many industrial applications such as form releases, forming and cleaning pastes, chain & conveyor lubricants and rubber & elastomer lubricants.

Thermaflo® fluids are CHEM Group exclusive recycled products that serve a range of operating temperatures and conditions. These fluids meet all OEM requirements and are compatible with fluids of similar chemistries. Thermalfo® fluids provide excellent in-service performance and can save you money.

AGC offers a wide range of silica products – under the name SUNSPERA™ –  for catalyst supports. These catalyst supports play an important role in conjunction with the catalyst for polyolefin polymerization and the synthesis of organic compounds. When manufacturing polyethylene and polypropylene, the properties of SUNSPERA silica gel have a significant effect on the polymerization process and properties of the finished polymer. SUNSPERA particles' pore structure, spherical shape and particle distribution are precisely defined. Using them as catalyst supports improves the morphology and increases the bulk density of the finished polymer resin. It also improves productivity. The SUNSPERA product line has grades suitable for liquid phase/slurry processes and gas phase processes.