Products in Industrial Adhesives & Sealants

TAFIGEL PUR 54 is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 54 can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners.TAFIGEL PUR 54 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, putties and printing inks. TAFIGEL PUR 54 is suitable for indirect food contact applications.

Glyptal® 880 is a thermoplastic shellac adhesive designed for bonding gaskets and used wherever excellent oil resistance is required, that is transformers, etc.

AGITAN 108 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 108 provides: High cost effectiveness; Excellent compatibility; Very fast action; Good control of foam even at low levels.

Kraton D1126 P is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. In addition, it has a diblock content of 30% and high melt flow. It is supplied from North America in the physical form identified below. Kraton D1126 PT - supplied as a dusted dense pellet Kraton D1126 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Omnistab 1130 is a liquid type UV absorber especially developed for coatings, and can be used in combination with hindered amine light stabilizers (HALS) such as Omnistab LS 292.

Omnirad 784 is a reactive orange colored solid photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to visible light or UV light. It can be used as the sole initiator or in combination with other initiators and mono or multifunctional monomers as reactive diluents. Omnirad 784 shows photobleaching properties and can be used in both clear and pigmented systems.

PHOTOMER® 3016-40R is a moderate viscosity, non volatile, acrylic ester derived from a low molecular weight aromatic epoxy resin. The product exhibits very fast cure speed.

Radiation-curing, low-viscosity polyester acrylate resin, solvent-free.

Saudi Carbonate SCC PCC 50C - YB The coated grade PCC finds application in Sealants to achieve better rheological qualities due to its ultra fine and uniform particle size distribution. The fatty acid surface treatment improves the dispersion behavior. The products act as a rheological modifier giving slump control.

Gaskets International GDSA-5G is used in applications like OEM equipment install and replacement seal install.

PURETOL™ 22D, odorless and colorless, is a white mineral oil with a Saybolt viscosity of 220 and a specific gravity of 0.862. This product meets US FDA CFR 172.878 and FDA 21 CFR 178.3620(a) requirements. This material meets the purity requirements of European Pharmacopeia (Ph. EUR.) - Paraffin, Liquid and United States Pharmacopeia (USP) - Mineral Oil requirements which is used for a variety of applications such as blending food grade lubricants and in the production of cosmetics and pharmaceuticals.

Taconic 7148 PTFE-Glass Fabric is a Standard Grade PTFE-Glass Fabric is used in the widest range of applications due to its combination of high performance and moderate price. Applications include release sheets on heat-sealing machines and laminate presses, release surface for paints, adhesives and food products, gaskets, seals and bearings for chemicals, oils, and gasses, thermal insulation for high-temperature and chemical-resistant applications and covers on hot platens, chutes, hoppers and troughs.

Taoka Chemical RP-7X is a cyanoacrylate adhesive that contains ethyl -2-cyanoacrylate used in bonding of metals, plastics, rubbers, wood etc. With humidity cure.

PURETOL™ 55, odorless and colorless, is a white mineral oil with a Saybolt viscosity of 530 and a specific gravity of 0.870. This product meets US FDA CFR 172.878 and FDA 21 CFR 178.3620(a) requirements. This material meets United States Pharmacopeia (USP) - Mineral Oil requirements which is used for a variety of applications such as blending food grade lubricants and in the production of cosmetics and pharmaceuticals.

Eco-Tite 5575 (Hybrid) is a one component, high modulus, fast curing, multipurpose silyl-terminated polyether (hybrid) elastomeric adhesive. When fully cured, this unique VOC compliant formula offers UV stability and tenacious stress free adhesion to PVC, concrete, glass, aluminum, painted surfaces, wood, plywood, marble, metal, plus many other common substrates. This product is specifically formulated to offer all weather performance to meet today's Green Building Standards.

PTM&W Industries, Inc ES6279 A is a light grayish-tan two part epoxy adhesive that was developed specifically for difficult bonding problems involving similar or dissimilar materials. There are two pigmented versions of ES6279 available: ES6271 is black and ES6272 is white. The three products are identical, except for color. These adhesives provide excellent adhesion to a wide variety of materials such as aluminum, steel, brass, concrete, brick, glass, stone, ceramics, tile and wood. These adhesives have very good handling characteristics. The mix ratio of 1 to 1 by weight or volume allows easy measuring. They have a creamy, smooth viscosity; are very easy to mix; and have good thixotropy for application to contoured or vertical surfaces without sag or runoff. These adhesives cure relatively quickly, developing sufficient “green strength” to allow bonded items to be removed from the holding fixtures and handled within a few hours. The cured material has excellent strength, as well as, good resistance to weak acids, moisture and weather.

Foreverest Resources Liquid Terpene Resin 31393 is polymerized by gum turpentine, which is a kind of excellent tackifier, with the characteristics including strong cohesive force, good aging resistance, heat resistance, radiation-proof, acid resistance, alkali resistance, odorless, nontoxic and excellent dielectric properties. It is designed to improve the initial viscosity of pressure sensitive tapes, and provide excellent compatibility and solubility in a wide range of applications which widely used for Pressure Sensitive Tapes, rubber, adhesive, hot melting coating, lacquer, superior printing ink, packing, anti-rust oil and chewing gum, etc.

Kraton D1111 K is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1111 KT - supplied as a dusted porous pellet Kraton D1111 KU - supplied as an undusted porous pellet Kraton D1111 KSM - supplied as a dusted powder Kraton D1111 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

PHOTOMER® 4046 is a proprietary acid mono functional monomer with medium viscosity. It exhibits excellent adhesion combined with hydrophobic characteristics when used in UV/EB cure laminating adhesives, coatings and inks formulations for various porous and non-porous substrates. It is tested to be non-corrosive.

AGITAN 150 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 150 is resistant to alkaline environment. It can be used between pH 6 and 11.

Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT - supplied as a dusted pellet Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

PHOTOMER® 5006 is a low viscosity, amine synergist with medium amine content. A co-polymerizable tertiary amine PHOTOMER® 5006 is used as a highly efficient co-initiator. In combination with UV acrylates it accelerates the cure of UV systems.

POLYTONE™ AP 108 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.

Omnirad BL 724 is a photo initiator blend for curing pigmented systems for UV and UV LED Lamps at 365 - 385 nm.

Taoka Chemical W-50 is a cyanoacrylate adhesive that contains ethyl -2-cyanoacrylate used in bonding of metals, plastics, rubbers, wood etc. With humidity cure.

GS® WT-1-300 Sealant is a non-hardening ethylene propylene copolymer extruded sealant that forms an immediate and permanent bond to virtually any clean and dry surface. GS® WT-1-300 Sealant remains permanently flexible while exposed to extreme temperature fluctuations, will self-heal around bolts and fasteners after it has been punctured, and is extremely weather resistant.

BONTAMIDE 2030 is a Standard hardener for epoxy resin.

A workhorse and cost-effective oil-based defoamer for adhesive applications. AGITAN 5018 provides excellent compatibility, dispersibility and long term performance in a wide variety of adhesive and coatings formulations.

only available in Asia! A universal workhorse defoamer effective in most adhesives including wood glue, envelope & label, construction, and natural/neoprene formulations. AGITAN A208 is also efficient in pigment dispersing and defoaming metallic inks. The defoamer provides excellent persistence in OPV, wood finishes, and a variety of industrial coating formulations as well.

ORIBAIN™ BPS 1109 is an adhesive used for PET/PVC Tape, Middle-High peel (multi use) applications.

PriMelt™ 3612 is a semi-pressure sensitive, economic and versatile. It is applicable in extrusion and wheel.

Epic Resins Epic S7226 is a two component urethane adhesive designed to give superior adhesion to a variety of substrates including FRP laminate and polyester. Epic S7226 polyurethane adhesive is supplied as two liquids and when mixed, form a paste suitable for use on vertical surfaces. Epic S7226 urethane adhesive will not sag in large diameter bead applications.

NGAC G907-52 is a room temperature curable epoxy adhesive with a low viscosity. This two-part system has a strong adhesion to glass, ceramics, most metals, and plastics.

Colquimica Adhesives B-2808 is used for chipboard and/or MDF assembly, particularly for bonding cardboard. Also appropriate for packaging applications.

MMA 3560 is recommended for larger structral assemblies, where long open time is required. Used for bonding applications in fibergladd boats with bond lines upto 25mm. Offers good tougness and excellant impact resistence.

GlucoStar® C500F-HV is a coldwater soluble, high viscosity, anionic polymer for use in industrial applications. It is a substituted natural polysaccharide designed to impart enhanced functional properties including: solution stability, surface activity, water retention, improved rheology and viscosity. GlucoStar C500F-HV also offers a unique alternative to competitive natural and synthetic water-soluble polymers. GlucoStar C500F-HV is specifically designed for use as a viscosifier in vat dyestuffs for textile flat goods printing applications. In addition, the ultra-low level of insoluble particles and high viscosity of GlucoStar C500F-HV makes it a good thickener for screen-printing