Products in Industrial: Consumer Applications

Domamid® 66M40 is polyamide 66, 40% mineral filler, is used for injection molding.

Formlabs High Temp V1 offers a heat deflection temperature (HDT) of 238°C @ 0.45 MPa, the highest among Formlabs resins.

TPE Solutions TPV 165A thermoplastic vulcanizate is a fully crosslinked, EPDM/PP compound. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs. TPV – 165A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F.

Domamid® 66G50H1UV1 is polyamide 66, 50% glass fiber reinforced, heat and UV1 stabilized, is used for injection molding.

STARCOM S/2000 is a PVC grade product.

Nylon 66 (Polyamide 66)

Nilit NILAMID® A3 GF30 TF20 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, low wear and friction with 20% PTFE, UL listed HB.This compound is intended for injection molding.NILAMID® A3 GF30 TF20 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Econamid® PLUS 66I3H2 by DOMO Chemicals is comprised of Polyamide 66. It is commonly used Econamid® PLUS 66I3H2 is certified as UL Flame Rated.

Domolen® PPCHVT20 NC is a polypropylene copolymer, 20% talcum, high viscosity used for injection molding and has natural color.

Nilit NILAMID® A3 GB30 is a Polyamide 66 (Nylon 66) compound, 30% glass bead reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 GB30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Domamid® 66I4 is polyamide 66, impact modified, is used for injection molding.

Nylon 6 A1030BRL is a standard Nylon 6 grade with medium viscosity. It is used for injection molding applications.

GreenTEC blue is a biopolymer specially developed for high-performance applicationswhere high temperature resistance and good mechanical properties are needed. In addition, the raw material is approved according to the FDA-, REACH- and RoHS- Standards.

Siropol 8339-TPBW resin is medium viscosity, medium reactivity, promoted, thixotropic, general purpose, unsaturated polyester resin. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food subject to user’s compliance with the prescribed limitations of that regulation.

Strong, tough plastic that stands up to the rigors of long-term real world use replacing traditionally injection molded articles. Engineered for the ProX 500 SLS® 3D printer, with exceptional recyclability and unparalleled mechanical properties.Applications Functional prototyping and low volume production parts for Automotive Aerospace Consumer goods Housings and enclosures Snapfits and complex assemblies Connectors Features Excellent mechanical properties Outstanding surface smoothness Exceptional recyclability Very high part density Benefits ProX 500 SLS system and DuraForm ProX were developed in conjunction to take SLS to a new level of performance and cost effectiveness Replace articles that are typically CNC machined or injection molded with this tough plastic Exceptional recycling rate reduces waste and decreases production costs Expanded utilization of parts

Nilit NILAMID® B2 HH GF60 is a Polyamide 6 (Nylon 6) compound, 60% glass fiber reinforced, high heat stabilized.This high stiffness and glossy finish compound is intended for injection molding.NILAMID® B2 HH GF60 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Elastocon® 8028N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8028N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8028N can be overmolded to polypropylene.Elastocon® 8028N is supplied as ready to use pellets in 50 lb. bag quantities.

Elastocon® CLR75 is a transparent thermoplastic elastomer that has been developed for applications that require oil/plasticizer free, non-blooming high strength properties and a tactile surface finish. Elastocon® CLR75 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR75 can be overmolded onto polypropylene.Elastocon® CLR75 is supplied as ready to use pellets in 1000 lb. quantities.

Nylon 6 A1030TF is a Lubricant grade with medium viscosity. It is used for injection molding applications.

Domamid® 66G50 is polyamide 66, 50% glass fiber reinforced, is used for injection molding.

Rigid Thermoplastic Polyurethane (TPU)

Nilit NILAMID® B3 W J20 is an unfilled Polyamide 6 (Nylon 6) compound, high impact modified, UL listed HB.This compound is intended for injection molding.NILAMID® B3 W J20 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Formac Natural Formamid 6 is used for automotive & farming mechanics, consumer goods and industrial applications. It has good stiffness, wear resistance and toughness. It is a easy flowing, finely crystalline injection molding grade for very fast processing.

Nilit NILAMID® A3 GF50 TM2 is a Polyamide 66 (Nylon 66) compound, 50% glass fiber reinforced, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® A3 GF50 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Ebalta MG 707 / Z 400 is a 2-components polyurethane material, which is cured thermically and used for prototypes. The four mentioned formulations differ in being filled or non-filled and their mechanical properties. The B-components Z 400 (potlife 8-12 min.) and Z 460 (potlife 60-70 min.) are identical and can be mixed with each other to control the reactivity, e.g. potlife. These combinations of Z 400 and Z 460 comp. B can be made any way as long as the totally required quantity of comp. B is observed (for each system). The total amount of Z 400 and Z 460 always has to be 30 g for 100 g comp. A

Domamid® 66G50HR1 is polyamide 66, 50% glass fiber reinforced, hydrolysis stabilized, is used for injection molding.

Domamid® XS 66V50H2 by DOMO Chemicals is comprised of Polyamide 66. It is commonly used

Domamid® L 66G30Y10 is polyamide 66, 30% glass fiber reinforced, improved triboligial properties, with MoS2, is used for injection molding.

Nano4 Bio PE EC MB 12 is an electrically conductive masterbatch based on bio-polyethylene.

Thermec™ N 4314R15T1H by DOMO Chemicals is comprised of Polyphthalamide. It is commonly used

Domolen® PPHHVT20H1 NC is a polypropylene copolymer, 20% talcum, high viscosity, heat stabilized and for injection molding and has natural color.

Econamid® FL 66G30 is polyamide 66, 30% glass fiber reinforced, is used for injection molding.

Nylon 66 (Polyamide 66)

Domamid® 66G33 is polyamide 66, 33% glass fiber reinforced, is used for injection molding.