Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Suggested Uses
- Molding
- Casting
- Laminating
- Water Tanks
- Bathtubs
- Boats
- Portable Toilets
- Flower Pots
- Chairs
Properties
- Physical Form
- Appearance
- Blue
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Percent Solids | 56 - 58 | % | — |
| Viscosity Brookfield, cps spindle 3 at 60 rpm | 400 - 450 | cps | — |
| Thixotropic Index | 1.5 - 2.0 | — | — |
| Acid Value | 8 - 18 | — | — |
| Specific Gravity | 1.04 ± 0.02 | — | — |
| Pounds per Gallon | 9.2 | — | — |
| Flash Point Range | 33 | °C | — |
| Water Absorption (7 day value) | 37 | mg | — |
| Barcol Hardness | 47 | — | — |
| Deflection temperature | 68 | °C | — |
| Flexural Strength | 106 | N/mm2 | — |
| Tensile Strength | 68 | N/mm2 | — |
| Elongation at break | 4.5 | % | — |
Regulatory & Compliance
- Certifications & Compliance
- Dot Label Required
Flammable Liquid
Technical Details & Test Data
- Typical Curing Characteristics
Cobalt 6 % Butanox M50 Temperature ºC Gel Time minutes Peak Exothermic Total Time - 1.0 % 25 ºC 25 min 348 ºF 40 min - Typical Physical Properties of Laminates
Property Unit Dry Value Wet Value Water Absorption (7 day value) mg 43 - Tensile Modulus kN/mm2 9.3 7.71 Flexural Modulus kN/mm2 7.38 6.59 Flexural Strength N/mm2 176 164 Tensile Strength N/mm2 91.5 88.3 Glass Content % % 27.4 - - COEFFICIENT OF THERMAL EXPANSION IN °F - 15
- THERMAL CONDUCTIVITY BTU/HR/IN °F - 1.7
- DIELECTRIC CONSTANT - 4.1
- DIELECTRIC STRENGTH VOLTS/MIL - 350
Packaging & Availability
- Standard Packaging
220 Kgs Standard Steel Drums
Storage & Handling
- Handling
SIROPOL 8339TPBW resin contains ingredients, which could be harmful if mishandled. Contact with skin and eyes should be avoided and necessary protective equipment and clothing should be worn.
Saudi Industrial Resins Ltd., maintains Material Safety Data Sheets on all of its products. Material Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.
Our MSDS should be read and understood by all of your supervisory personnel and employees before using SIR`s products in your facilities.
- Recommended Storage
DRUMS: Store at temperatures below 25 o C. Storage life decreases with increasing storage temperature. Avoid exposure to heat sources, such as direct sunlight or steam pipes. Keep containers sealed to prevent moisture pickup and monomer loss. Rotate stock.
BULK: Store in stainless steel tanks or tanks lined with epoxy or phenolic coatings. Observe precautions against heat and moisture (see above). An oxygen or dry air spurge may be desirable to keep inhibitors activated. Store at temperature below 25 ºC.