Products in Leather & Textiles: Good Mechanical Properties

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

GrapheneBlack™ 3X is NanoXplore's slightly larger pristine few-layer-graphene designed for multi-functional performance improvements in a wide range of markets and technologies. GrapheneBlack can be used in thermoplastics, thermosets, concrete, coatings, lubricants, and rubbers and enables manufacturers to cost-effectively improve long term product performance.

Boron Nitride NanoBarb™ BNNB-P-90A1 uses a proprietary, catalyst-free process, to manufacture an enhanced boron nitride nanotube called the Boron Nitride NanoBarbTM, with properties enhanced beyond typical nanotubes further making the NanoBarbTM a strategic component for improving advanced materials.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Adell Plastics, Inc. Adell™ Polyamide BR-13 is a Polyamide 6 (Nylon 6) material filled with 13% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-13: Flame Rated.

USP-EAGLE (BU130-70) is Unsaturated Polyester resin with good flexibility, high translucency, non-accelerated and non thixotropic. It is used in manufacture of buttons by centrifugation and casting rods procedures.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Adell Plastics, Inc. Adell™ Polyamide BL-38 is a Polyamide 6 (Nylon 6) material filled with 40% glass\mineral. It is available in North America.Typical application of Adell Polyamide BL-38: Automotive

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Tasnee PP H1030 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 3 g/10min. Tasnee PP H1030 is designed for stretch tape from water bath and chill roll, offering low water-carry-over and low shrinkage. Its good mechanical properties and compliance to food contact regulations allow it to be used in various applications.

Polaid TPT is an effective nucleating dispersing agent, specially developed for talc filled & transparent application PE/ PP based antifibrillation masterbatches/ compounds.

Optically clear, solid fused amorphous silica microspheres specially engineered for optimum dispersion in paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion and impact resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including mar and scratch resistance. Ideally suited for specialty applications where mechanical and rheological properties are required. Median particle size of 3 to 4 microns, with a particle size range of 0.5 microns to 92% passing 22 microns.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Next Nylon 66 Industrial Series PX-02BK is PA66 UnFilled Black Compound.

The virgin base resins of Polyamide 6 have excellent technical properties, a very low specific weight, chemical resistance to solvents (oils, greases and fuels), a very low moisture absorption. The remarkable ease of processing and the high physical-mechanical characteristics allow it to be used in various fields of application, in the automobile sector, in the textile and electrical industry, in the household appliances sector, in mechanics, in furnishings, etc. The excellent recyclability characteristics of Relon B help to preserve natural sources.

KPR 6100 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6100 is used in laminations.

Polyumac Air-Cell T-100 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

Anhui Wanwei Group Water-soluble PVA fiber First grade is a kind of cotton-like synthetic fiber, which has been widely used in agriculture, light industry, textile, military, medical and other fields in recent years.

Domamid® 66G35 is polyamide 66, 35% glass fiber reinforced, is used for injection molding.

Polyumac Air-Cell T-200 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

Domamid® 66M25 is polyamide 66, 25% mineral filler, is used for injection molding.

INOFLON® GN7003 has high dielectric strength with good dimensional stability.

KPR 6115 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6115 is used in gel coats.

Domamid® 6G20 is polyamide 6, 20% glass fiber reinforced, is used for injection molding.

SAFILIN Low Twist Roving Tex2000 materials are used in technical applications and composite with high mechanical performance for the automotive industry, sport and leisure, construction, aviation and rail transport, consumption goods and design.

AGR 15 is a ABS Glass Filled 15%.

Next Nylon 6 Prime Series NX-01NC is PA6 UnFilled Natural Compound.

Domamid® 66M40 is polyamide 66, 40% mineral filler, is used for injection molding.

Apcotex TY100 is a copolymer of styrene-butadiene latex used for dipping of fabric for tire cord, V-belts and conveyor belts. Its application also includes textile finishing and adhesive. It is manufactured by emulsion polymerization method with state-of-the-art manufacturing facilities to produce consistent product.

AGR 30 is a PPO Glass Filled 30%.

Domamid® 6G40 is polyamide 6, 40% glass fiber reinforced, is used for injection molding.

KPR 6300C by Kemrock Industries and Exports is an orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6300C is used in buttons.

Beijing Evergrow Resources PVDF SHEET sheet has the good corrosion resistance ; good mechanical properties; good thermal and electrical properties and good aging resistance ,it's widely used in petrochemical , metallurgy,food,paper ,textiles,semi-conductor,mechical engineering,medcine,nuclear insdustries. and PVDF sheet back with glass fiber can as the good lining materials used in Cheimal popes and tanks.

The virgin base resins of Polyamide 66 have excellent technical properties, a very low specific weight, chemical resistance to solvents (oils, greases and fuels), a very low moisture absorption. The remarkable ease of processing and the high physical-mechanical characteristics allow it to be used in various fields of application, in the automobile sector, in the textile and electrical industry, in the household appliances sector, in mechanics, in furnishings, etc. The excellent recyclability characteristics of Relon A help to preserve natural sources.