Products in Leather & Textiles: Good Thermal Stability

EverGlide® MB150 is a Polypropylene Homopolymer (PPH) which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

GrapheneBlack™ 3X is NanoXplore's slightly larger pristine few-layer-graphene designed for multi-functional performance improvements in a wide range of markets and technologies. GrapheneBlack can be used in thermoplastics, thermosets, concrete, coatings, lubricants, and rubbers and enables manufacturers to cost-effectively improve long term product performance.

ARAGEN-10 series, A New Generation of formaldehyde-free, fluorescent pigments for water-free formulations with significantly improved light fastness and heat resistance compared to conventional, formaldehyde-containing fluorescent pigments. This innovative range of daylight fluorescent pigments offers intense fluorescence and outstanding stability in solvent and waterborne formulations.

ARAGEN-10 series, A New Generation of formaldehyde-free, fluorescent pigments for water-free formulations with significantly improved light fastness (2-10 times vs. Formaldehyde based pigments) and heat resistance compared to conventional, formaldehyde-containing fluorescent pigments. This innovative range of daylight fluorescent pigments offers intense fluorescence and outstanding stability in solvent and waterborne formulations.

EverGlide® MB3450 is a Styrene Acrylonitrile polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

ARAGEN-10 series, A New Generation of formaldehyde-free, fluorescent pigments for water-free formulations with significantly improved light fastness (2-10 times vs. Formaldehyde based pigments) and heat resistance compared to conventional, formaldehyde-containing fluorescent pigments. This innovative range of daylight fluorescent pigments offers intense fluorescence and outstanding stability in solvent and waterborne formulations.

ARAGEN-10 series, A New Generation of formaldehyde-free, fluorescent pigments for water-free formulations with significantly improved light fastness (2-10 times vs. Formaldehyde based pigments) and heat resistance compared to conventional, formaldehyde-containing fluorescent pigments. This innovative range of daylight fluorescent pigments offers intense fluorescence and outstanding stability in solvent and waterborne formulations.

ARAGEN-10 series, A New Generation of formaldehyde-free, fluorescent pigments for water-free formulations with significantly improved light fastness (2-10 times vs. Formaldehyde based pigments) and heat resistance compared to conventional, formaldehyde-containing fluorescent pigments. This innovative range of daylight fluorescent pigments offers intense fluorescence and outstanding stability in solvent and waterborne formulations.

BPS provides outstanding thermal stability and electrical Performance.It is particularly suitable for engineering plastic applications such as polyesters(PET,PBTandPCT) and polyamides(nylons).

Metocene MF650Y is a high melt flow rate polypropylene homopolymer resin with very narrow molecular weight distribution. It is suitable for melt blown fibers as well as compounding extrusion applications.This material is available as a free-flowing, low dust granule resin. The very narrow molecular weight distribution and high degree of resin consistency promote finer fibers, enhanced fiber filament thread line continuity as well as reduced fly and lint in melt blown spinning processes. Its high melt flow rate allows reduced processing temperatures and energy savings. This is a low smoke, clean running resinwith good thermal and processing stability.

Domamid® 6M30 is polyamide 6, 30% mineral filler, is used for injection molding.

ESTOPLAST EP 2015BB01 is a Polybutylene Terephthalate - Glass fiber reinforcement, which is 15% used in interior parts of automotive as well as in bobbins, E-motor components, lightings and lamp fittings.

EP AO 107 is a Thermal and UV stability for polyolefins geo-membrane sheet which improve Oxygen-Index-Temperature (OIT) values.

BLS 1622 (65447-77-0)is a high molecular weight hindered amine light stabilizer. BLS 1622 has minimal interaction with co-additives such as pigments and other stabilizers and thus is highly effective in systems using carbon black and pigmented systems. Secondary effects as an antioxidant are realized in the long-term heat stability of polyolefin systems. Areas of application include polyethylene, polypropylene, unsaturated polyester, styrenics, acrylics and vinyl polymers.

Ositer® PKB-230R is a Stilbene derivative. Excellent fluorescence and whiteness. High efficiency. Excellent fastness to light and heat.

IFG PLA fibers are melt spun from a sustainable, bio-based raw material that is compostable under industrial conditions (DIN 13432). IFG PLA fiber provides a bio-based solution for ground stabilization projects (turf, grass, sand) that will not affect the natural drainage properties. Due to their unique thermal properties, they also offer a bio-based solution for heat-sealing paper applications. Fibers are mainly raw white, but a range of colors can be supplied, minimum order quantities apply

Special Materials Company SMC Global 688 flame retardant is a unique cyclic phosphonate product. Chemically equivalent to Amgard CU, this high phosphorus containing material is suited for applications in both thermosoling of polyester fabric for wash durability as well as topical non-durable applications of a variety of fabric types and contraction. It also demonstrates excellent flame improvement with many textile back coatings. SMC Global 688 is suited for acrylic based latices and other oxygen containing polymers. SMC Global 688 is used to assist the textile back coater in meeting the NFPA 701, MVSS-302, and other flammability standards for textile fabrics. It has excellent water solubility and can be added directly to the latex without the addition of an emulsifier. In addition, this neat material has shown promise as a flame retardant for several polymer compounds including polyurethane foam, elastomer, TPU, and adhesives.

Resin CPX-LF is a flame retardant, firm resin for nylon, raschel nets, automotive and industrial fabrics, sheers, tulle and maline fabrics. The product falls below OSHA standards for free formaldehyde making it the lowest on the market for free formaldehyde levels. It is a viscous resin offering a fast cure with no powdering when properly cured. Advantages are non-yellowing, faster wetting, long bath stability, ultra-Low free formaldehyde, durable, excellent resilience, increased firmness, greater “spring & bounce”, available in 55 Gallon Plastic Drums or 275 Gallon Totes (return when empty).

Domamid® 6G40 is polyamide 6, 40% glass fiber reinforced, is used for injection molding.

Astra Polymers White-MB/Bluish White/Antistatic is used under automotive, consumers, packaging, electrical, appliances, construction, agriculture.

Next Nylon 66 Industrial Series PX-02BK is PA66 UnFilled Black Compound.

REMAMID® is a Primary PA materials that have specifically modified properties.

Domamid® 6G20 is polyamide 6, 20% glass fiber reinforced, is used for injection molding.

Domamid® 66G35 is polyamide 66, 35% glass fiber reinforced, is used for injection molding.

Domamid® 66M25 is polyamide 66, 25% mineral filler, is used for injection molding.

Domamid® 66M40 is polyamide 66, 40% mineral filler, is used for injection molding.

Silopren™ LSR 2530 is a two-component liquid silicone rubber especially developed for the coating of textiles and glassfibre fabrics.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 2530 are distinguished by the following properties: low viscosity excellent thermal stability high stability and flexibility at low temperatures good rubber-like properties long service life at dynamic stress high stability to ozone and ultraviolet light outstanding resistance to aging excellent dielectric behavior over a wide range of temperatures not readily combustible, does not melt or drip easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 2530 is particularly suitable for the following applications: textile coating for protective suits or conveyor belts, coating of glasfibre fabric sleeves, coating of fabrics for compensators, tents and other technical applications s.o.

EVATHENE® UE653-04 is an ethylene-vinyl acetate copolymer resin (EVA).

Textile Rubber & Chemical M 132A is Aqueous emulsion.Its Advantages are high flame-retardant efficiency, good plasticizing activity, excellent thermal stability.Compatible with other plasticizer emulsions.

Domamid® 66G50 is polyamide 66, 50% glass fiber reinforced, is used for injection molding.

Domamid® 6G50 is polyamide 6, 50% glass fiber reinforced, is used for injection molding.

Astra Polymers White-MB/UV is used under automotive, consumers, packaging, electrical, appliances, construction, agriculture.

Domamid® 6B40 is polyamide 6, 40% glass beads, is used for injection molding.

Shandong Dawn Polymer Material Z-1500H has long term heat resistant ability, low ash content and good processability. It is used in applications like melt-blown non-woven fabric, automobile sound absorption cotton, automobile heat insulation pad etc.

d2p® Flame Retardant decrease the ignitability of materials and inhibit the combustion process, limiting the amount of heat released.

EVATHENE® UE647-04 is an ethylene-vinyl acetate copolymer resin (EVA).