Products in Oil, Gas & Mining

Superohm® 2565 is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. It is formulated to obtain balanced performance characteristics with excellent electrical properties suitable for operation up to 450F (230C) and 25 kV in appropriate cable construction when extruded and cured consistent with industry standards.

CSURF 364 is an advanced micelle solution for use in hydraulic fracturing. The formulation is designed as a multi-functional additive that performs as both a non-emulsifier and surface active agent. The micelles in CSURF 364 in <100 nm in size, allowing increased penetration into tight formation pore throats.

Orange polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

CCT-CI360 contains a quinoline quat surfactant, a synergistic blend of an acetylenic alcohol replacement solvents, and a highly effective dispersion package allowing it to inhibit corrosion in all hydrochloric (HCI) and hydrochloric--hydrofluoric (HCI--HF) acid blends up to 177°C (350°F).

Desilube 98F is an ecofriendly high performance anti-wear, anti-friction, extreme pressure lubricant additive.

Lanspec OF65 is an ammonium neutralized alkyl ether sulfate and finds application where high foaming, characteristics are required, particularly in the presence of highly levels of electrolyte and polyvalent metal ions. Lanspec OF65 has good stability in the presence of alkaline solutions at moderate temperatures, but will hydrolyse in acidic solutions.

Kemsurf CA is a calcium salt of a biodegradable dodecylbenzene sulphonic acid. The base acid for Kemsurf CA is manufactured by SO3 sulphonation to produce a product of good color and low inorganic content. Kemsurf CA is a hydrophobic anionic surfactant and functions as an emulsifier for oils and aromatic solvents in the formulation of degreasers. It finds many applications, however, as an emulsifier for pesticide and herbicide systems, especially were spray application is involved. Kemsurf CA may also be used in the emulsification of waxes and hydrocarbon solvents. This product has good compatibility with other anionics and nonionic surfactants and maintains good stability, detergency, foaming power and soil suspension in alkaline, mild acid, low electrolyte and in hard or soft water.

Orange Masking Agent is an odor masking agent. It is used as a complement to DEOMER. It will leave a mild orange scent that will mask unwanted odors.

SuperOhm® 3754 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Florigiel® HY rheology modifier is highly desired for use in oil well drilling mud, slurry trench walls and other geotechnical applications for its excellent stability in a salt or high ionic environment. It serves as an essential thixotropic thickener and suspension agent and meets API Specification 13A/ISO 13500.

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

Bio-Lube POP (Pipe on Pipe) is a non-petroleum-based Natural Oil Extract with superior bonding capabilities to metal surfaces. It is designed to reduce torque and drag on the drill string against the wellbore and to reduce metal to metal friction in Coiled Tubing applications. Bio-Lube can also be used in most oil-based systems. Bio-Lube POP is completely bio-degradable and easily miscible in water-based and oil-based fluid systems.

SULFURTRAP® EX is a non-hazardous, solid adsorbent used for the removal of hydrogen sulfide (H2S) and light mercaptans from gas and liquid hydrocarbon streams in batch processing applications. SULFURTRAP® EX is an economical and predictable fixed bed process that eliminates foaming and carryover associated with liquid scavenger systems. Extended bed life, minimal replacement time and reliable operation sets SULFURTRAP® EX apart from other H2S removal technologies.

SI-700B is a polymeric scale inhibitor blend which has excellent performance in controlling mineral scale such as Calcium Carbonate and Barium Sulfate in downhole and surface conditions. SI-700B will exhibit a degree of adsorption on to rock surfaces, resulting in improved squeeze lifetimes. SI 700B is thermally stable to 400℉ and is not affected by the presence of Iron and other foulants.

We produce high quality Sodium Perchlorate Monohydrate (SPM), via electrochemical route. Sodium Perchlorate Monohydrate (SPM) is used in production of packaged explosives for mining applications, production of higher performing Ca-Zn stabilizers in PVC, additives in rubber and plastics. It is also utilized as a laboratory chemical and reagent, for DNA extraction and other processes in the production of Bio-pharmaceuticals, especially Insulin, manufacturing of propulsion oxidizers for Aerospace and Defense applications and other various Industrial applications.

Desilube 77 is an ecofriendly high performance anti-wear, anti-friction, extreme pressure lubricant additive.

Parahib-2500 is highly effective dispersant used to remove existing paraffin and asphaltene deposits. Parahib-2500 prevents redeposition in the formation, production tubing and surface equipment. Parahib-2500 is the preferred treatment for the most difficult and problematic production systems.

The CCT X-40 Gel series is designed as a superior quality Xanthan gum slurry system. Manufactured ussisng high quality Xanthan gum powders and enviromentally-friendly ND BTEX mineral oil, the series is uniquely formulated to meet your needs. With a hydration rate of 25+cP in 3 minutes. CCT X-40 Gel provides rapid hydration with low separation. The CrudeChem formultaed slurry is a 4lb per gallon Xanthan powder, suspended in a high-permonance surfactant, organophilic clay and mineral oil package. Product is typically compatible with fresh water, potassium chloride water, sodium and calcium chloride brines.

Kemsurf CA-EH is a calcium salt of a biodegradable dodecylbenzene sulphonic acid. The base acid for Kemsurf CA-EH is manufactured by SO3 sulphonation to produce a product of good color and low inorganic content. Kemsurf CA-EH is a hydrophobic anionic surfactant and functions as an emulsifier for oils and aromatic solvents in the formulation of degreasers. It finds many applications, however, as an emulsifier for pesticide and herbicide systems, especially where spray application is involved. Kemsurf CA-EH may also be used in the emulsification of waxes and hydrocarbon solvents. This product has good compatibility with other anionics and nonionic surfactants and maintains good stability, detergency, foaming power and soil suspension in alkaline, mild acid, low electrolyte and hard or soft water.

SI 500 has very high calcium tolerance with good scale inhibition effects. It is an effective scale inhibitor for a squeeze or continuous treatment of calcium and magnesium carbonate, calcium, strontium, and barium sulfate and iron scales in water system of high temperatures. In addition to being a good scale inhibitor, the product is also an anodic corrosion inhibitor. Thus, it can be used as a scale/corrosion inhibitor for cooling water, boilers, water floods, or drilling system.

CrudeChem Technology Citric Acid 35W is used in oil or gas, water treatment.

Surf-664 is highly effective dispersant used to remove/inhibit existing paraffin and asphaltene deposits in the formation and increase oil production. Surf-664 is a single solution synergistic blend of surfactants, dispersants and a solvent Surf-664 prevents redeposition in the formation, production tubing and surface equipment. Surf-664 can be injected during fracking to improve production or can be used to treat a unproductive well to bring back the max production. Surf-664 also cleans piping and storage tanks.

SuperOhm® 2575 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

SuperOhm® 3455 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

CCT-AS40 is a surfactant and solvent blend designed specifically for anti-sludge applications during batch acidizing and acid fracturing. The proprietary formula is an aqueous, biodegradable, ecofriendly solvent blend that is effective across a broad pH range, including 15% Hydrochloric acid. This product is effective in both sandstone and carbonate formations.

Superohm® 2560 is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. Cables jacketed with this compound are recognized for balanced properties including excellent heat and deformation resistance at high temperatures, oil resistance, and superior mechanical properties and is suitable for operation up to 450F (230C) in appropriate cable construction when extruded and cured consistent with industry standards.

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

Superohm® 240 NL-HE is a RoHS compliant, highly flexible, colorable, polymeric composition in pellet form, based on EPR rubber, containing peroxide curing agent, ready for extrusion in a conventional CV or Dry cure extrusion line. It is formulated to obtain balanced performance characteristics with excellent electrical properties suitable for applications up to 25kV.

PERCO® CATALYST is a fixed-bed Mercaptan (RSH) conversion process for liquid and gaseous hydrocarbon streams. The PERCO® CATALYST converts light Mercaptans to odorless, non-corrosive disulfides. The process is commercially proven to meet product and pipeline specifications e.g. copper strip test, negative doctor test, or low Mercaptan sulfur (ppm). PERCO® CATALYST offers low pressure-drop, long bed life, simplistic in its design and operates over a broad range of flow rates and temperatures. PERCO® CATALYST is a reliable long-term solution for the reduction of mercaptans.

Lanphos PE107 is a phosphate ester specifically developed to provide excellent stability in high alkali and electrolyte systems, providing excellent detergency wetting and corrosion inhibition. Lanphos PE107 can also be used to couple nonionic surfactants into liquid alkali detergents.

Dispelair® BS 756 is an antifoam used while drilling muds during the oil process in the Petroleum Industry. It can act quickly, is cost effective and can be supplied as emulsions or compounds.