Products in Refining & Gas Processing

XIAMETER(TM) PMX-200 Silicone Fluid 500,000 cSt is a high-viscosity polydimethylsiloxane polymer that is primarily used for foam control in nonaqueous processes. In petroleum processing, it provides effective foam control at extremely low dosage levels. This product is also suitable for use in personal care applications. The high-molecular-weight dimethicone provides easy combing and detangling for wet or dry hair and adds softness, smoothness, and gloss.

XIAMETER(TM) PMX-200 Silicone Fluid 600,000 cSt is a high-viscosity polydimethylsiloxane polymer that is primarily used for foam control in nonaqueous processes. In petroleum processing, it provides effective foam control at extremely low dosage levels. This product is also suitable for use in personal care applications. The high-molecular-weight dimethicone provides easy combing and detangling for wet or dry hair and adds softness, smoothness, and gloss.

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

IGEPAL CA-520 is a nonionic surfactant that facilitates emulsification of non-polar hydrocarbon solvents and oils. Its applications encompass solvent emulsion cleaners, dry cleaning detergents, anti-icing additives for automotive gasoline, emulsifiers for pesticides, and floor polishes. It falls under the category of octyl phenol ethoxylates.

SILFOAM® SD 986 is an antifoam solution with a low viscosity that incorporates a small amount of highly viscous silicone fluid. The presence of dimethylpolysiloxane in SILFOAM® SD 986 provides effective defoaming properties in various mineral oil products and non-aqueous systems. This is attributed to its low surface tension and excellent spreading ability, enabling efficient foam control.

VESTAMID® NRG 2901 BK is a high-viscosity, heat-stabilized compound with exceptional mold release properties. It is nucleated to reduce cycle time and shrinkage of molded parts. It is commonly used for gas pipes and fittings, with a proven record of safe and reliable performance in demanding applications, including fuel lines in passenger cars, air brake tubing in trucks, and offshore applications.

CAPLUS® Industrial Additives, known for their exceptional absorption capacity, serve as efficient absorbents in various industrial processes, particularly in gas sweetening within the oil, gas, and mining sectors. These additives enhance gas treatment, making them a valuable choice for the refining and gas processing markets.

USALCO Melamine Resin is a low-molecular-weight cationic resin used for separating oil and water in refinery flotation units. It is also useful in clarifying latex waste and textile industry waste when combined with an anionic polymer. Additionally, the resin is effective in treating paper mill waste, and USALCO holds a patent for it. A low-formaldehyde version of this product is also available.

T-Det® N 100 LG is a versatile surfactant designed for oil and gas processing applications. It is highly effective in refining and gas processing within the industrial sector. This surfactant ensures efficient performance, making it an essential component in oil, gas, and mining operations.

T-Det® N 6 is an anhydrous liquid nonionic surface active agent produced by the reaction of nonylphenol with 6 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state and are used in a variety of industries, such as agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

Antifoam GN™ 11P is a 100% high-performance and general-purpose antifoam that provides an efficient and economical means of preventing costly and dangerous foam in many systems. This product is stable in both highly acidic and highly alkaline systems.

T-Det® N 7 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 7 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state. They are used in agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

T-Det® N 4 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 4 moles of ethylene oxide. It is used as a gasoline additive to prevent gas line freezing and carburetor. Non-ionics are stable, non-corrosive products in an anhydrous state.

T-Det® O 8 functions as both a surfactant and an emulsifier, making it ideal for various applications. In the beauty and care industry, it is used in fragrances and perfumes. It is also applicable in gas and oil processing, as well as in leather manufacturing for the leather and textiles sector. This versatile product ensures efficient performance across multiple industrial processes.

T-Det® N 8 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 8 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state. They are used in agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

T-Det® N 9.5 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 9.5 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state and are used in agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

T-Det® N 20 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 20 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic surfactants and it is stable in the presence of acids, bases, and salts.

Harcros Sulfuric Acid 93% is a liquid used in mineral processing, oil refining, and wastewater treatment. It is employed in the production of fertilizers and falls under industrial markets, specifically in chemical and industrial manufacturing.

Spectraguard 350 is an industrial additive that functions as a scale inhibitor, offering effective decontamination and a long service life. Ideal for water treatment, oil processing, wastewater treatment, metal finishing, and more.

Spectraguard 250 is an industrial additive that functions as a scale inhibitor, offering high performance and effective decontamination. Ideal for water treatment, wastewater treatment, oil processing, metal finishing, and more.

Spectraguard 111 is an industrial additive with anti-scaling properties, ideal for various processes like wastewater treatment, metal finishing, and oil processing.

Spectraguard 100 is an industrial additive with high performance, effective decontamination, and scale inhibiting features. Ideal for water, wastewater, oil, metal finishing, and food processing applications.

Harcros Caustic Potash 18% is a potassium hydroxide solution used in chemical manufacturing, industrial cleaning, and refining and gas processing. Belonging to the alkalis, bases, hydroxides, and potassium salts chemical families, it serves as a key component in pH control, neutralization, and other processing applications.

Ketron® 1000 PEEK is a high-performance polymer that offers excellent mechanical properties and chemical resistance. It is widely used in a variety of applications where high strength and stiffness, low friction, and excellent dimensional stability are required. This material is ideal for instrument and seal components, where its high elongation and toughness make it an excellent choice. Its non-toxic and biocompatible properties make it suitable for use in medical and food processing applications.   Key features: High strength and stiffness Low friction Excellent dimensional stability High elongation and toughness EU 10/2011 and FDA compliant   Benefits: Improved performance and durability of components Increased resistance to chemicals and high temperatures Enhanced biocompatibility and safety in medical and food processing applications Greater design flexibility and compatibility with a wide range of applications and industries   Application: Structural parts: Ketron® PEEK is often used for structural components that are subject to high temperatures and chemical exposure. For example, it is commonly used for vacuum wand handles in semiconductor manufacturing. Bushings, bearings, seals, and back-up rings: Ketron® PEEK is an excellent choice for components that are subject to wear and tear. Its low coefficient of friction and high strength make it suitable for use in a wide range of applications, from aircraft to oil field drilling.   Ketron® 1000 PEEK is available in a range of shapes and sizes, making it easy to incorporate into your designs. It is a versatile and reliable material that can help improve the performance and longevity of your products.

Ertalyte® is a high-performance polyethylene terephthalate polyester (PET) produced by Mitsubishi Chemical Advanced Materials. With its exceptional wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, Ertalyte® is the ideal material for applications that require sustained high loads and high-temperature performance.Features:Excellent wear resistanceLow coefficient of frictionHigh strength and toughnessResistant to moderately acidic solutionsRetains more of its original strength up to 180° F / 85° C than nylons or acetalsBenefits:Capable of sustaining high loadsIdeal for applications requiring high-temperature performanceExtends the service life of componentsLow maintenance and repair costsSuitable for use in harsh environmentsApplications:PharmaceuticalFood processing and packagingOil and gasBearings and structural applicationsAny application requiring high load and high-temperature performance.

CHT Group XAF-102 is a 100% active, self-dispersing antifoam compound. It is formulated for specialized applications that require a high-active solution to combat high pH foaming systems. Belonging to the XAF series, this product provides outstanding performance in extreme environments.

CHT Group XAF-101 is an extreme-performance polymer blend with 100% active content. This foam management solution has excellent knockdown and persistence. It works effectively even at low concentrations and in both hot and cold systems. Applications Coatings Wastewater treatment Oil and gas processing Pulp and paper Grinding applications

WACKER® SG 3381 is a polyalkylene oxide-modified polydimethylsiloxane that contains organo-functional groups in the α,ω-position. This unique structure gives a functional value of 2 per modified polydimethylsiloxane. The functional groups are chemically bonded to the polydimethylsiloxane through chemically inert alkylene spacer groups, which are highly stable to hydrolysis.