Products in Other Industrial Applications: Good Weather Stability

Markphos® TPP is a Co-stabilization in combination with metal soaps in PVC, PU, styrenics, engineering thermoplastics, rubber and polyesters up to 3.0%. Also used as an intermediate for preparation of other phosphites.

Armlen PP MF 30-3IM is a 30% mineral filled, impact modified polypropylene. Designed for injection molding of items and parts for wide solutions range: construction, electronics, auto industry, machine engineering, aviation, fire safety equipment, household, transportation etc. Including products exploited outdoor in natural light, precipitation and other weather factors. Available in natural, light beige, beige-yellow, beige-gray and chocolate colors.

Aronkasei AR-731 is styrene type elastomer AR.

N40 contains general properties like good weather-resistance, moderate resistance to petroleum-based fluids and good physical properties.

Aronkasei AR-760 is styrene type elastomer AR.

Aronkasei AR-741 is styrene type elastomer AR.

Flontech PTFE FT-GL25-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

NCI is a commercial grade black neoprene sheet with nylon reinforcement and has chloroprene reinforced with 3.4 0z./Sq. yd. nylon fabric

ATECH® 3100 is a series of sheets based on ABS which is a raw material with very high impact-strength. ABS also has impressive thermal qualities and is easy to thermoform and fabricate. ATECH® 3100 is a super high impact matt ABS which remains matt after thermoforming.

Flontech PTFE FT-CAR25-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Aronkasei AR-781 is styrene type elastomer AR.

Markphos® EHDP is a Co-stabilization in combination with metal soaps in plasticized PVC up to 1.0%; in PU, ABS, and PC up to 3.0%.

Markphos® TTDP is a Co-stabilization in combination with metal soaps in plasticized PVC and plastisols up to 1.0%

Flontech PTFE FT-CARR25-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Flontech PTFE FT-STST50-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Flontech PTFE FT-CF10-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Aronkasei AR-750 is styrene type elastomer AR.

NDIA is a commercial grade black neoprene sheet with nylon reinforcement and has chloroprene reinforced with 14.5 0z./sq. yd.nylon fabric

Ubesta™ 3030 U is a high viscosity, non-reinforced and non-plasticized Polyamide 12 preferably for extrusion application. UBESTA 3030 U shows only low moisture absorption and therefore exceptional dimension stability..

Shandong Donglin New Materials CPE (Chlorinated Polyethylene) 135A is a high molecular polymer with linear structure generated by the reaction of HDPE and chlorine. It itself is a special thermoplastic elastomer. It has the following excellent chemical properties: good weather resistance, flame retardancy, It is resistant to chemicals and ozone. Its basic function is to improve the impact strength and weather resistance of PVC products. Donglin CPE 135A has excellent elongation at break and the best tensile strength. Compared with other CPE products, our CPE has higher impact strength.

Aronkasei AR-770 is styrene type elastomer AR.

Flontech PTFE FT-GR15-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Aronkasei AR-710 is styrene type elastomer AR.

Markphos® TDP is a Co-stabilization in combination with metal soaps of plasticized PVC up to 1.0%; in PU, ABS, and PC up to 3.0%.

ATECH® 3200 is a series of sheets based on ABS which is a raw material with very high impact-strength. ABS also has impressive thermal qualities and is easy to thermoform and fabricate. The ATECH 3200 is a super high impact ABS with a top layer of high gloss PMMA (acrylic).

Markphos® DPDP is a Co-stabilization in combination with metal soaps in plasticized PVC up to 1.0%; in PU, ABS, and PC up to 3.0%.

SBR 4684 is a developmental carbon black master batch (CBMB) containing 52 parts of N-234 carbon black. It is extended with 10 parts of highly aromatic oil. SBR 4684 has excellent abrasion resistance, superior physical properties and is smooth processing. Product is made to order on demand.

Aronkasei AR-791 is styrene type elastomer AR.

American Biltrite AB-566 (FDA) is a Ethylene Propylene (EPDM) Polymer.

China Star Materials Nickel dibutyldithiocarbamate (Antioxidant NBC) is bottle-green powder. It can be used as an antiozonant for CR, CSPR, ECO, SBR, NBR, etc. In CR, it can improve the thermal resistance of rubber, and reduce the discoloration under the sun, and it can slightly retard the vulcanization.

Polypropylene filled with 20% Calcium Carbonate, impact resistant. Main features: High impact resistance, easy to demould, intended for the manufacture of thin-walled products. Available in various colors. Application: plinth siding panels.

JYANOX 245 Antioxidant is a kind of high-effective asymmetric phenolic antioxidant.

Flontech PTFE FT-BRR40-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Markphos® PDDP is a Co-stabilization in combination with metal soaps in plasticized PVC up to 1.0%; in PU, ABS, and PC up to 3.0%.

Aronkasei AR-720 is styrene type elastomer AR.

N50 contains general properties like good weather-resistance, moderate resistance to petroleum-based fluids and good physical properties.