Products in Power, Water & Utilities: Polyesters

Crystic® Brush Gelcoat 69PA is a pre-accelerated Iso-NPG gelcoat formulated for brush application. It has been developed to have exceptional water and chemical resistance and is recommended for use in sanitaryware and chemical containment applications. Crystic® Gelcoat 69PA is approved by Lloyd'™s Register of Shipping.

Low Styrene Crystic® Ecogel S4PA is a lower cost option, suitable for industrial applications (not Marine) where users are looking for an industrial option with low styrene content (23% styrene content). It is a high performance isophthalic gelcoat. This gelcoat is pre-accelerated and formulated for spray application.

Crystic® Fire Retardant Resin 1355PA is a pre-accelerated, filled, fire-retardant polyester resin that has been designed for contact molding applications. It has been formulated as an inexpensive resin and wets out the reinforcement rapidly. This product is supplied in a restricted range of colors.

Crystic® Polyester Resin R115PA is a general purpose thixotropic, pre-accelerated, orthophthalic, unsaturated polyester resin. It has a 10-minute gel time and is suitable for use in buidling and construction, transportation and industrial applications by hand lay up or by spray application for the production of most glass reinforced laminates.

Crystic® Polyester Resin 701PAX is a pre-accelerated isophthalic polyester resin with low viscosity and controlled exotherm characteristics. It is designed for use in vacuum infusion processes. This product has Lloyd's approval and is suitable for use in marine, wind energy, building and construction, and transportation.

Crystic® Polyester Resin 2.8500PA is a low-styrene emission, pre-accelerated, orthophthalic polyester resin that rapidly wets out reinforcements. It is a general-purpose resin that is suitable for non-critical and industrial applications such as liners, pipes, and tanks. This product has a 17-minute gel time.

Crystic® Ultra-Low Styrene Ecogel S1PA is an ultra-low-styrene-content spray gel coat. This market-leading, unique technology spray gel coat has only 16% styrene content, which cuts styrene emissions by over 55%. It is suitable for use in industrial and general-purpose applications in transport, building, and industrial markets. This product is also used for the manufacture of wind turbine blades.

Crystic® Polyester Resin 702PAX is a pre-accelerated orthophthalic polyester resin with low viscosity and controlled exotherm characteristics. It is designed for use in vacuum infusion processes. This product has Lloyd's approval and is suitable for use in marine, wind energy, building and construction, and transportation.

Zero Styrene Crystic® Ecogel S0PA is a zero styrene spray gelcoat for industrial applications such as the wind energy sector. This product is acetone free and can be used with Butanox® M-50. Key features include: High elongation Zero Styrene Content Excellent weathering performance Easy to apply Low VOC emission

Crestafire® GCS 1001E is a non-accelerated, low-smoke, fire retardant intumescent polyester-based gel coat designed to be applied by spray in a thin layer of 500μm. It incorporates new intumescent technology. When exposed to fire, Crestafire® GCS 1001 E forms a foamed cellular charred layer, offering a high degree of protection to the surface of the composite. It is restricted to a standard light grey color and is designed to be post-painted.

Crestafire® GCS 1005PA is a pre-accelerated, low-smoke, fire-retardant, polyester-based intumescent gelcoat designed to be applied by spray in a thin layer of 500μm. It incorporates new intumescent technology. When exposed to fire, Crestafire® GCS 1005PA forms a foamed, cellular charred layer, offering a high degree of protection to the surface of the composite. It is restricted to a standard white color, designed to be post-painted, and formulated to EN45545-2 standard to meet HL3.

Crestafire® GCS 1001PA is a pre-accelerated, low-smoke, fire-retardant, polyester-based gelcoat designed to be applied by spray in a thin layer of 500μm. It incorporates new intumescent technology. When exposed to fire, Crestafire® GCS 1001PA forms a foamed, cellular charred layer, offering a high degree of protection to the surface of the composite. It is restricted to a standard light grey color and is designed to be post-painted. It is formulated to EN45545-2 standard to meet HL2.

DISTITRON® 183 CAV5F - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

Enydyne® GP-1 is general purpose DCPD resin for hand lay up and spray up. It is generally used in industrial sector applicatons.

Enydyne® LSP-8020B - ortho-DCPD, preaccelerated resin for short gel time RTM. Main applications areas are automotive, industrial sector, marine etc.

DISTITRON® 167 V6 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

DISTITRON® 1629 EL5 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce pipes and tanks through filament winding method.

menzolit® BMC 1100 is a bulk molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.

Norsodyne® 2625TI - thixotropic, promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Norsodyne® PT-201 - terephthalic-neopentylglycol resin for pultrusion, fast wet-out. Main applications areas are building and construction, industrial sector etc.

Verkid® SMC H154 is used in hot press, compression molding for the production of large parts with high mechanical properties and excellent surface finish. It is a glass fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives.

Norsodyne® VUP-6737S - terephthalic resin for SMC-BMC, high strength , good surface gloss. It is generally used in industrial sector applicatons.

LTNM600/P3/600 is a Sandwich composite felt. It is a fabric with a sandwich structure made of synthetic non-woven core material with uniform glass fiber short layers or glass fiber cloth on both sides, and multi-axial fabric stitched by polyester stitching threads. The weight is 400~2000g/㎡, and the width is 50~3200mm. Products are widely used in wind energy, nacelle covers, boats, auto parts, etc.

NORSODYNE® Y 90286 - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce mastics,putties.

ENYDYNE® H 61104 TAPF - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through hand lay up and spray up method.

NORSODYNE® O 13155 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used in hand lay up and spray up method.

Norsodyne® BR-235A - good workability, flexible type, for rods production. Main applications areas are leisure and clothing etc.

Soric® SF 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

G-Etronax® PM GPO 3 is the composite material that does it all. G-Etronax® PM GPO 3 as an all-in-one material. This is because the carefully composed resins combined with the glass base result not only in exceptional resistance but also amazing electrotechnical properties, making G-Etronax® PM GPO 3 suitable for countless applications.

DISTITRON® 414 CV3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through casting,injection molding,rtm method.

NORSODYNE® Y 61295 - Unsaturated polyester resin in styrene,DCPD. It is used to produce mastics,putties.

Norsodyne® 3110W - promoted and waxed. Main applications areas are building and construction, industrial sector etc.

Coremat® XM 4 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

CIP Composites CIP251A is ideal material option in high load, slow oscillating or linear slide motion applications. Manufactured with polyester and PTFE combined textile and a polyester resin with the solid lubricants PTFE and molybdenum disulfide (MoS2) evenly dispersed throughout the resin system.

ENYDYNE® R 61500 T - Unsaturated polyester resin in styrene,DCPD. It is used to produce pipes and tanks.

Stypol® 040-8084 - pre-promoted unsaturated polyester closed molding resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.