Products in Power, Water & Utilities: Pipes

Crystic® Brush Gelcoat 69PA is a pre-accelerated Iso-NPG gelcoat formulated for brush application. It has been developed to have exceptional water and chemical resistance and is recommended for use in sanitaryware and chemical containment applications. Crystic® Gelcoat 69PA is approved by Lloyd'™s Register of Shipping.

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Low Styrene Crystic® Ecogel S4PA is a lower cost option, suitable for industrial applications (not Marine) where users are looking for an industrial option with low styrene content (23% styrene content). It is a high performance isophthalic gelcoat. This gelcoat is pre-accelerated and formulated for spray application.

Crystic® Polyester Resin R115PA is a general purpose thixotropic, pre-accelerated, orthophthalic, unsaturated polyester resin. It has a 10-minute gel time and is suitable for use in buidling and construction, transportation and industrial applications by hand lay up or by spray application for the production of most glass reinforced laminates.

Crystic® Polyester Resin 2.8500PA is a low-styrene emission, pre-accelerated, orthophthalic polyester resin that rapidly wets out reinforcements. It is a general-purpose resin that is suitable for non-critical and industrial applications such as liners, pipes, and tanks. This product has a 17-minute gel time.

Crystic® Ultra-Low Styrene Ecogel S1PA is an ultra-low-styrene-content spray gel coat. This market-leading, unique technology spray gel coat has only 16% styrene content, which cuts styrene emissions by over 55%. It is suitable for use in industrial and general-purpose applications in transport, building, and industrial markets. This product is also used for the manufacture of wind turbine blades.

Zero Styrene Crystic® Ecogel S0PA is a zero styrene spray gelcoat for industrial applications such as the wind energy sector. This product is acetone free and can be used with Butanox® M-50. Key features include: High elongation Zero Styrene Content Excellent weathering performance Easy to apply Low VOC emission

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

DISTITRON® 183 CAV5F - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

Enydyne® GP-1 is general purpose DCPD resin for hand lay up and spray up. It is generally used in industrial sector applicatons.

Enydyne® LSP-8020B - ortho-DCPD, preaccelerated resin for short gel time RTM. Main applications areas are automotive, industrial sector, marine etc.

DISTITRON® 167 V6 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

SKAPS FM 180 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

DISTITRON® 1629 EL5 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce pipes and tanks through filament winding method.

DISTITRON® VE 102 V9 - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce production of gelcoat,profiles through mix with fillers and/or additives,pultrusion.

Norsodyne® 2625TI - thixotropic, promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Norsodyne® PT-201 - terephthalic-neopentylglycol resin for pultrusion, fast wet-out. Main applications areas are building and construction, industrial sector etc.

Norsodyne® VUP-6737S - terephthalic resin for SMC-BMC, high strength , good surface gloss. It is generally used in industrial sector applicatons.

NORSODYNE® Y 90286 - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce mastics,putties.

Polynt Group HUP 22/50 RB-Color is generally used in industrial sector applications.

SMCarbon® 26CF30-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

ENYDYNE® H 61104 TAPF - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through hand lay up and spray up method.

SKAPS T 1800 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

Polycor® 945 Tooling polyester tooling gel coats provide durable surfaces to withstand the repeated moldings of FRP laminates. It is generally used in composites applicatons.

NORSODYNE® O 13155 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used in hand lay up and spray up method.

Norsodyne® BR-235A - good workability, flexible type, for rods production. Main applications areas are leisure and clothing etc.

3B Fiberglass MF 01 ER are E-CR glass filaments ground to a specified density. MF 01 ER is designed to reinforce products like thermoplastics, thermoset resins, glues, coatings, and adhesives within a large range of applications and markets.MF 01 ER represents a main improvement compared to minerals when aiming for a higher stiffness and/or better impact properties in combination with specific properties, such as flow enhancement, flame retardancy, uniform isotropic shrinkage, resistance to acid environment, coating stability, etc. MF 01 ER can be collocated in between mineral fillers and most com-monly available milled fibers as it dis-plays an intermediate length/diameter aspect ratio. The product comes in a powdery form that provides both improved flowability/handling and low density.

SMCarbon® 90CF40-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

EPOVIA RF-2000SEL is Brominated vinyl ester resin for hand lay up-filament winding and it is generally used in Building and Construction,Chemical Industry,Industrial sector,Railway Sector applicatons

Rhino Linings USA, Inc. 1310T-Lt Bl Resin is a 100% solids, non-draining, epoxy system for producing Cured In-Place Pipe.. 100% solids, non-draining, epoxy system for producing Cured In-Place Pipe. It is tinted transparent blue, and the hardeners are transparent yellow.

SKAPS TDBM 1702 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins