Products in Off Road & Commercial Vehicle Coatings: Epoxy & Epoxy De...

Catana™ EPOX 2015 is a distilled min. 98% grade of 2-ethylhexylglycidylether. Catana™ EPOX 2015 main use is as reactive diluent for high viscosity epoxy resins applied in high solids coatings, tooling, flooring, adhesives, etc.

GP® CL-7003 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

S-381-N5 is a modified, micronized blend of natural and synthetic wax that has a uniform melting range peaking at 91°C. Shamrock's product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

GP® CL-7002 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

GP® CL-7004 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

Catana™ EPOX 2474 is a distilled min. 98% grade of normal-butylglycidylether. Catana™ EPOX 2474 is most efficient viscosity reducing reactive diluent for high viscosity epoxy resins such are applied in adhesives, laminating, tooling, etc.

Catana™ EPOX 2360 is a clear viscous liquid consisting of polypropyleneglycol diglycidylether. It has a higher epoxy group content than the Catana™ EPOX 2361. Catana™ EPOX 2360 main use is as reactive diluent or flexibilizing resin for high viscosity epoxy resins applied in coatings, casting, adhesives, sealants, etc.

S-394-N1 is a synthetic wax with a DSC melt peak above 110°C and good onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes

CHS-EPOXY 112 4F5 is a Modified by 5% of flow control agent.

Razeen® SR 5334 is a high flow, solid, epoxy resin based on bisphenol A containing 2.5% flow agent.

CHS-EPOXY 171 is a Low molecular weight "1,5 - type" epoxy resin.

Razeen® SR 5074 is a Unmodified Bisphenol A based solid epoxy resin from type 5½ characterized by higher melt viscosity.

CHS-EPOXY 141 4F5 is a Modified by 5% of flow control agent.

CHS-EPOXY 112 4F0,5 is a Modified by 0,5% of flow control agent.

Razeen® SR 5013 is a solid, unmodified Bisphenol A epoxy resin.

Razeen® SR 5174 is a solid, Bisphenol A epoxy resin modified with 5% flow modifier.

Araldite® GT 6750 N is a high flow, solid, epoxy resin based on bisphenol A containing 2.5% flow agent.

Razeen® SR 5143 is a Solid epoxy resin “type 2½” based on bisphenol-A, containing 2.5% flow agent.

CHS-EPOXY 141 is a Low molecular weight "2,5 - type" epoxy resin.

Araldite® GT 6084 is an unmodified solid epoxy resin based on Bisphenol A.

CHS-EPOXY 160 is a Low molecular weight "2 - type" epoxy resin.

Razeen® SR 5084 is an unmodified solid epoxy resin based on Bisphenol A.

AltroColor EP 2000 Color Pastes are based on a bisphenol A/F resin and have been developed particularly for the coloring of epoxy resin systems. As our AltroColor EP 2000 Color Paste Series are based on a reactive/crosslinkable binder, a full integration into your epoxy resin system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor EP 2018 is oxide black colored.

CHS-EPOXY 130 4F10 is a Modified by 10% of flow control agent.

Araldite® GT 7014 N is a solid, unmodified epoxy resin based on Bisphenol A.

Razeen® SR 5274 is a solid flow agent master batch for use in epoxy based powder coatings.

Araldite® GT 7255 N is a Solid Epoxy Resin based on Bisphenol A and Novolac for powder coating.

CHS-EPOXY 112 is a Medium molecular weight "4 - type" epoxy resin.

Razeen® SR 5284 is a solid epoxy resin based on Bisphenol A with a narrow molecular weight distribution modified with 0.5% flow modifier for improved gloss and flow.

CHS-EPOXY 160 4F2,5 is a Modified by 2,5% of flow control agent.

Razeen® SR 5004 is a solid medium molecular weight epoxy resin based on Bisphenol A.

Razeen® SR 5357 is a Solid epoxy resin based on bisphenol A and phenol novolac for powder coating.

Razeen® SR 5014 is a solid, unmodified epoxy resin based on Bisphenol A.

CHS-EPOXY 130 is a Medium molecular weight "3 - type" epoxy resin.

Araldite® GT 7013 N is a solid, unmodified Bisphenol A epoxy resin. Thick and thin film coatings.

Araldite® GT 7004 is a solid medium molecular weight epoxy resin based on Bisphenol A.