Paints & Coatings
1,319 products found in Paints & Coatings
DISPAL 28AC2 is a modified boehmite alumina designed specifically for coatings and polymer applications. The key property enhancements in coatings formulations are corrosion inhibition and adhesion promotion. DISPAL 28AC2 is amenable to water and solvent-based paint applications and can be mixed directly into your formulation providing enhanced performance with ease.
CYMEL® 325 Resin
CYMEL® 325 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. It is highly reactive and has a high tendency towards self-condensation providing films with very good hardness, gloss, chemical resistance and outdoor durability. It is suitable for a wide range of solventborne or waterborne baking applications, such as coil and can coating formulations, automotive primers and topcoats, and general industrial coatings.
When your application calls for a general purpose hardener at low temperatures, Amirez 148/024 exceeds all performance expectations, meeting every specification requirement with speed and a greater degree of technical excellence. This low viscosity, fast cure waterborne reactive polyamide adduct has all application angles covered, from floor and wall painting to hygiene coatings.
Jubail Chemical Industries
Araldite® GZ7071X75 is a typical type 1 epoxy resin based on Bisphenol A as solvent cut 75% in Xylene. The resin is similar to solid resin Araldite® GT 7071.
CYMEL® 1170 Resin
CYMEL® 1170 resin is a highly butylated glycoluril crosslinker designed for use in both water and organo-soluble coating systems. Its superior adhesion relative to existing melamine and benzoguanamine crosslinkers provides increased corrosion resistance and flexibility. The better adhesion is not lost after post-forming of parts and exposure of the stressed coating to humidity, steam, dry heat, or weather. This feature makes this product a good candidate for coil of metal decoration enamels and primers. In addition, it releases significantly lower amounts of formaldehyde during the baking process compared to other amino resins.
SETAQUA® B E 270
SETAQUA® B E 270 is water thinkable, oil-free, polyester resin. In combination with water-thinkable amino resins in the formulation of industrial stoving coatings and aqueous stoving primer surfacers for online automotive finishing, both with low co-solvent content.
SETALUX® D A 450 BA/X
SETALUX D A 450 BA/X is a hydroxyl-functional acrylic polyol that is used in the formulation of very fast-drying two component polyurethane coating systems. When SETALUX D A 450 BA/X is used with aliphatic/aromatic polyisocyanates based on toluene diisocyanate and hexamethylene diisocyanate, two-component filler coats and topcoats for wood are possible that can be sanded very early and stacked after a short time.
PHENODUR® PR 263/70B
PHENODUR® PR 263/70B is a curable phenolic resin developed as a binder for shop- and washprimers. It has excellent pigment wetting properties.
SETAQUA® 6004 YA
SETAQUA® 6004 YA is an urethane modified, co-solvent free short oil alkyd resin emulsion (32% oil)
Amirez 142 allows easy mixing with epoxys onsite. Using Amirez® 142 in your coating formulation helps create a coating that protects, and goes on protecting, for years and years. APEO and formaldehyde free, it promotes excellent chemical resistance. With features such as visible end of pot life, it’s easy to see why it’s the perfect solution for a wide variety of applications.
Amirez 148/055, the perfect cure for formulation challenges. Even better when you discover it's been developed to address high gloss with fast cure, no blushing and water resistance. It creates floor coatings with unrivaled performance characteristics, such as excellent hardness, superb water and chemical resistance. It seals and protects to give high gloss and esthetically pleasing, durable floors.
GP® BKR-2620 coating resin is a solid, heat-reactive, modified phenolic resin. It can be used with a wide selection of solvents and is compatible with plasticizers and polyvinyl butyral resins. Films made with unplasticized GP BKR-2620 resin have greater flexibility than those made with other unmodified phenolic resin baking solutions.
BECKOPOX™ EM 2120w/45WA
BECKOPOX™ EM 2120w/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX™ EM 2120w/45WA is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorrosive properties, especially on smooth steel.
ADDITOL® VXW 6394
ADDITOL® VXW 6394 is a wetting and dispersing agent for aqueous resin-free pigment concentrates.
UUCECOAT 7674 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable coatings. UCECOAT 7674 is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under acidic conditions. UCECOAT 7674 contains no co-solvent. UCECOAT 7674 exhibits outstanding wetting of wood surfaces, imparting warmth and richness to the appearance of the wood. UCECOAT 7674 provides hardness in the polymerized coating along with good stain and chemical resistance.
GP® BLS-2700 coating resin is a liquid heat-reactive phenolic resin solution in ethanol for coatings of rigid metallic substrates. It provides excellent intercoat adhesion and is effective as a metal primer.
CYCAT® 500 Catalyst
CYCAT® 500 Catalyst is a strong sulfonic acid catalyst. It is recommended for use in electrocoating applications to achieve cures in the range of 110 - 135 °C in 15 to 30 minutes, or to reduce the baking time at higher baking temperatures. This product is also recommended for coatings applied by other application techniques, providing improved adhesion and resistance properties compared with other sulfonic acid type catalysts.
BECKOCURE® EH 2260W/41WA
BECKOCURE® EH 2260w/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corrosion protection and very good non-sagging properties can be formulated. This product shows excellent application behavior and very robust performance even on poorly prepared surfaces.
KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate
Amirez 148/010, the perfect cure for formulation challenges. Even better when you discover it's been developed to address high gloss with fast cure, no blushing and water resistance. It creates floor coatings with unrivaled performance characteristics, such as excellent hardness, superb water and chemical resistance. It seals and protects to give high gloss and esthetically pleasing, durable floors.
Bubbling. It’s a problem which pops up time and time again, particularly in areas subject to low temperature and high humidity levels. Fortunately, under these conditions, Aldirez A provides the ability to create primers that remain remarkably resilient and bubble-free. In addition to its exceptional ability to inhibit CO2 generation, formulators are able to accelerate the cure of PU primers, to improve turnaround efficiency, whilst retaining a workable pot life.
D&R Dispersions and Resins
Akryvil® WSA 4612
Akryvil® WSA 4612 is a Styrene-acrylic dispersion used for Decorative, Primer Interior and Exterior paints. It has dispersions of acrylic, styrene acrylic and vinyl acrylic copolymers are high-quality products. Their production process is based on various parameters such as dry matter content, viscosity, average particle size, vitrification temperature or minimum film formation temperature. This allows us to supply raw materials perfectly adapted to the needs and expectations.
Crestakyd® 10-1066 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.
CYMEL® 5010 Resin
CYMEL® 5010 resin is a partially n-butylated benzoguanamine resin supplied in a mixture of n-butanol and xylene and designed for solvent-based coatings. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation.
ADDITOL® XW 6533
Additol® XW 6533 is a cobalt-free combination drier, water-emulsifiable. It contains a balanced metal combination which is necessary for an optimum oxidative drying. It may be added as siccative to all waterborne oxidatively drying alkyd resin paints.
SETALUX® 1179 BA-57
SETALUX® 1179 BA-57 is an acrylic polyol with 1.7 % OH (calculated on non-volatiles) which is fast drying. SETALUX® 1179 BA-57 has good compatibility with CAB and good alcohol resistance.
PHENODUR® VPM 1150/50EPAC
PHENODUR® VPM 1150/50EPAC is a carboxy modified, nonyellowing co-curing resin. It is used in combination with high molecular weight epoxide resins for stoving interior and exterior can coating systems, foil lacquers, stamping enamels, coil coating primer and chemical resistant primer.
SETAQUA® 37-1371 (formerly SETAQUA® 6471) is fine particle size styrene acrylic emulsion that forms hard, impact resistant films with exceptionally high water, salt spray and mineral spirit resistance. SETAQUA® 37-1371 is used in anti-corrosive coating of relatively low PVC as well as superior adhesion to new galvanized iron.
Pat-Add AF 34
PAT-ADD AF 34 is liquid defoamer for use in waterborne coatings like varnishes, wood-coatings, industrial paints, aqueous inks and pigment dispersions.PAT-ADD AF 34 is oil and VOC-free and based on a polysiloxane hydrophobic polymer compound.PAT-ADD AF 34 is versatile in application, so efficient in various waterborne systems such as dispersion paints, industrial systems, inks and adhesives. It is effective fordefoaming and anti-foaming purposes during manufacturing and application and reduces risk of micro-foaming.
Polyols and Polymers
POLYTONE™ K-94 is practically acidless, unsaponifiable Ketone Formaldehyde Resin which is very light in color, has excellent light resistance and show but very slight tendency to solvent retention. Addition of this resin in general improves gloss, hardness, filling, adhesive strength and durability
ADDAPT Chemicals BV
ADDAPT BioWet 150R is a solvent free, ready biodegradable wetting agent which improves the Wet-Edge (open time) and Water Retention. It is a Polyhydroxy - Amide. The product is EINECS registered.
Jubail Chemical Industries
Araldite® GT 7071
Araldite® GT 7071 N is a low melting solid unmodified epoxy resin based on Bisphenol A. with narrow molecular weight distribution. Araldite® GT 7071 N can be added to alkyd/amino stoving enamels to enhance their quality and to powder coatings e.g. to improve their flow.
SYLVALITE™ RE 100L
SYLVALITE RE 100L rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100L exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.
Ultrakim Kimya San. ve Tic. A.Az.
NEVOSIL® R 630
NEVOSIL® R 630 is employed as a main binder in silicone based masonry paints. If formulated properly, the products made with NEVOSIL® R 630 are characterized by superior qualities such as high permeability to water vapor and CO2, low water absorption, low soiling tendency, a mineral like appearance and longer life.
ProHere® E 00017
ProHere® E 00017 is developed for anti-corrosion primers and pre-treatment sealers for metallic substrates providing excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents.