Products in Industrial Coatings

MultiTech Degreaser A is a hydrogenated naphtha-kerosene cut with a typical distillation range of 240-270ºC. It has a very low aromatic content, with a low penetration smell.

MultiTech Solvent D meets or exceeds certification requirements of the National Formulary. It is produced to the highest standards for key industries, including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, Packaging, Personal Care, and Pharmaceuticals & Healthcare. Offering low impurities, low Benzene, and low water content, AdvanSix High Purity Acetone NF grade can be used as an intermediate in the production of: Building and Construction Construction and repair adhesives, exterior insulation and finishing systems, glazing and window elements, pipe and plumbing cement systems, and roofing sealants and caulks. Agriculture & Feed Agricultural pest control and industrial weed and vegetation control products. Automotive & Transportation Automotive aftermarket parts, exterior and body parts, interior parts and lighting, and coatings for aerospace, automotive OEM, marine, rail, mass transit, off-road and commercial vehicle applications. Electrical & Electronics Devices and assemblies for automotive and consumer electronics, packaging and assembly adhesives and sealants, printed circuit boards, and other semiconductor manufacturing applications. Healthcare & Pharma Oral and dental drug delivery solutions, tubing and fluid handling equipment, excipients, coatings and processing aids and nail care applications.  Paints & Coatings Architectural coatings, decorative paints, wood coatings and finishes, flooring and surface coatings, infrastructure coatings and markings, and packaging coatings for film and foil, overprint varnishes, primers and lacquers, and other aerosol coating applications.

CASE Ingredients Color Pigment F for use in solvent borne and radiation cured coatings and inks. CASE Ingredients Color Pigment F are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the CASE Ingredients Color Pigment F have been selected to meet the durability and transparency requirements of most high performance applications.

DiTech Specialty Binder & Resin is a low molecular weight liquid polymer derived by the depolymerization of butyl rubber. It vulcanizes at either ambient or elevated temperature with the standard curatives for butyl rubber. DiTech Specialty Binder & Resin is light gray and contains no solvents or additives. DiTech Specialty Binder & Resin has the lower viscosity of the two DiTech Specialty Binder & Resin available and is the preferred liquid butyl rubber for coatings applications. DiTech Specialty Binder & Resin provides gas impermeability, chemical resistance, moisture resistance, good electrical properties, and excellent vibration/sound damping qualities.

MultiTech Microbial Control Agent B is an antimicrobial additive suitable to be used in a broad variety of materials such as paints & coatings or building & polymeric materials.

DiTech Effect Pigment B was improved for enhancement of the visual effect of products and the creation of a strong illusion of depth. Its high shining effect can make decorations dazzlingly bright and colorful. Glitters ChemTech are available in different colors, particle sizes, base materials and quality grades.

CASE Ingredients Color Pigment D for industrial water-based systems

BCI Multifunctional D is a clear, colorless liquid ketone-alcohol. The principal end uses of BCI Multifunctional D are in industrial coatings, household cleaners, inks, paints, paint removers, paint thinners, pharmaceutical preparations, sealants, primer and pesticides. BCI Multifunctional D is used as a chemical intermediate in the preparation of Methyl Isobutyl Ketone and Hexylene Glycol.

BaseCase Solvent A is an aqueous solution of an aliphatic, low molecular weight urethane diol oligomer. It is recommended as a modifier for amino crosslinked water soluble and emulsified acrylic, alkyd, urethane and polyester resins. BaseCase Solvent A can be used as a reactive cosolvent replacement to increase solids, crosslink density, improve film/resistance properties and flow/leveling.

Polymer Mold Release Agent is a versatile coating designed to release all injection molded thermoplastic resins. It produces a very low coefficient of static friction so parts release easily. It resists film buildup, eliminates knit lines, and yields multiple releases with a single application. TPC-1 is food grade and meets FDA regulation 21 CFR181.28 as a release agent.

CASE Ingredients Photoinitiator is particularly indicated for the photo polymerisation of UV curable systems when high reactivity, low curing odor and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines.

MultiTech Multifunctional F is a methyl branched diamine with differential reactivity of each amine group that allows for crystallinity disruption in various applications such as high temperature nylon and polyamides, polyurethane chain extenders, and epoxy hardeners. It is also used in applications such as water treatment, corrosion inhibition, and metalworking fluids where amine functionality and pH control are important. MultiTech Multifunctional F has 93% recycle content. It is also used in applications such as water treatment, corrosion inhibition,and metalworking fluids where amine functionality and pH control are important. MultiTech Multifunctional F has 93% recycle content.

BaseCase Monomer B is a low viscosity mono-functional acrylated monomer which can be polymerised in the presence of free radicals. This Cyclic Trimethylolpropane Formal Acrylate (CTFA) is typically used in UV and EB curable applications. BaseCase Monomer B offers good solvency and very good adhesion properties on metals and plastics.

Beijing Panxin Titanium R258 is the new developed top grade general type rutile titanium dioxide,which was produced on base of the vulcanization process quality control experience,also used the new innovated research fruit such as inorganic envelope,organic treatment,salt treatment,calcinations control,hydrolyze and product usage technology,it also used the advantage hue and size control technology,Zr Si Al,P inorganic envelope and new developed organic treat technology.

CASE Ingredients Binder & Resin A is a thermosetting hydroxylated acrylic copolymer. Good compatibility with cellulose aceto-butyrate resins.

MultiTech Corrosion Inhibitor Pigment A is a highly effective anti-corrosive pigment designed to meet the specific performance requirements for coil coatings and other thin-film applications.

MultiTech Solvent A is ideal in high purity applications. Key benefits include uniform evaporation, minimal moisture content and a low toxicity, ecotoxicity and volatile organic compound (VOC) profile. MultiTech Solvent A is sold to customers around the world and across industries including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives, Paints & Coatings, Electronics, and Pharmaceutical applications. High Purity MultiTech Solvent A is used in the Adhesives & Sealants market as an intermediate in the production of construction adhesives; DIY and Consumer sport and fashion applications; textile and footware adhesives. High Purity MultiTech Solvent A is used in the Agriculture & Feed markets as an intermediate in the production of agricultural, commercial and residential pest control, and industrial weed and vegetation control. High Purity MultiTech Solvent A is used in the Automotive and Transportation market as an intermediate in the production of coatings and finishes. High MultiTech Solvent A is used in the Building and Construction market as an intermediate in pipes and plumbing applications, and construction chemical adhesives. High Purity MultiTech Solvent A is used in the Consumer Goods market as an intermediate in the production of appliances and electronics. High Purity MultiTech Solvent A is used in the Electrical and Electronics market in the production of devices and assemblies for automotive and consumer electronics, packaging and assembly adhesives, printed circuit boards, semiconducting manufacturing applications. High Purity MultiTech Solvent A is used in the Food and Nutrition market in processing and packaging applications. High Purity MultiTech Solvent A is used in the Healthcare and Pharma market in tubing and fluid handling and medical flexible packaging applications. High Purity MultiTech Solvent A is used in the Paints and Coatings market in aerospace coatings, industrial and metal coatings and can coating applications. High Purity MultiTech Solvent A is used in the Printing & Packaging market as a packaging can coatings, rigid packaging caps, closures, containers and tubs.

MultiTech Corrosion Inhibitor Pigment D is a white, non-refractive, corrosion inhibiting pigment used in protective coating systems. MultiTech Corrosion Inhibitor Pigment D is our most efficient and versatile corrosion inhibitive pigment. It is recommended for use in a wide variety of resin systems and is equally effective in such resins as: alkyds (both traditional and high solids), epoxies, latexes, water reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of MultiTech Corrosion Inhibitor Pigment D makes it the pigment of choice in thin film applications (<1 mil or 25 microns).

HDK® H21 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H21 is used as a thickening and thixotropic agent in various applications such as composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

WACKER® Silane M1-Triethoxy is a clear, colorless liquid with an odor characteristic of alcohols. The use of WACKER® Silane M1-Triethoxy to render fillers water repellent considerably improves their dispersibility and reduces their sedimentation tendency. Mineral-filled plastics can thus be processed more easily. Additionally, resistance to moisture and chemicals is much higher.

VINNAPAS® UW 1 FS is a tasteless, solid, thermoplastic homopolymer. It is a clear and colorless resin obtained through the polymerization of vinyl acetate. This versatile product finds application in various fields, including fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

HDK® H15 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H15 is commonly utilized as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. Additionally, it serves as a reinforcing filler in elastomers, particularly silicone elastomers. Moreover, HDK® H15 functions as a free flow additive in the production of technical powders.

GENIOSIL® GF 80 is an epoxy functional alkoxysilane. When used as a coupling agent in mineral-filled plastics, it enhances filler dispersibility, reduces sedimentation tendency, and significantly lowers the resin's viscosity. Moreover, it allows for higher filler loading and provides notable improvements in water (vapor) resistance, as well as resistance to acids and bases. In the realm of adhesives and sealants, incorporating GENIOSIL® GF 80 enhances adhesion to the substrate and improves mechanical properties like flexural strength, tensile strength, and modulus of elasticity.

WACKER® Silicate TES 40 WN is an ethyl silicate polymer. It is a low-viscosity liquid that provides approximately 41% of silicon dioxide (silica) upon complete hydrolysis. WACKER® Silicate TES 40 WN is used for the precipitation of polymeric SiO2 structures (silica) upon complete hydrolysis, with ethanol being produced as a by-product.

VINNOL® H 15/42 is a copolymer consisting of approximately 86 wt.% vinyl chloride (VC) and 14 wt.% vinyl acetate (VAc). Its primary application is as a binder in surface coating compounds and printing inks. This thermoplastic and physically drying binder undergoes film formation as the solvent present in the formulation evaporates.

VINNAPAS® B 100/20 VLE is an approximately 50% solution of a vinyl acetate/vinyl laurate copolymer in ethyl acetate. VINNAPAS® B 100/20 VLE can be diluted with esters, ketones, aromatic solvents, and chlorinated hydrocarbons. The solution's compatibility with alcohol is limited. VINNAPAS® B 100/20 VLE is not compatible with aliphatic compounds.

VINNOL® H 15/45 M Special is a specialized carboxylate-containing terpolymer composed of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 0.5 wt.% dicarboxylic acid. Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic and physically drying binder creates a film as the solvent within the formulation evaporates.

HDK® N20 is a synthetic, hydrophilic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. This white colloidal powder offers high purity and serves multiple purposes. One of the primary applications of HDK® N20 is as a thickening and thixotropic agent in organic systems such as unsaturated polyesters, coatings, printing inks, adhesives, and cosmetics. Additionally, it functions as a reinforcing filler in elastomers, particularly silicone elastomers.

SILFOAM® SH is an anhydrous antifoam compound used in various industrial applications. It was specifically developed for different technical applications, including the biotechnological industry. SILFOAM® SH serves as an effective degassing aid to reduce foam formation during the production and processing of paints. Additionally, it is a reliable degassing aid for PVC pastes and casting resins.

SILRES® SY 231 is a solventless, liquid, reactive, methoxyfunctional methyl-phenyl polysiloxane with a narrow molecular weight distribution. It is utilized for enhancing the weather and heat resistance of organic resins. This product can be employed as a cold blend additive, where it is directly mixed with the organic resins, or as a chemically bound intermediate, where it is chemically incorporated into the structure of organic polymers. By incorporating SILRES® SY 231, the resulting materials exhibit improved resistance to weathering and heat, making them suitable for applications requiring enhanced durability and performance.

HDK® S13 is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® S13 is a white colloidal powder of high purity. It finds application in inkjet paper and pulp, paper & printing processes.

HDK® T40 is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® T40 finds applications in flexographic printing, gravure printing, industrial wood coatings, inkjet paper, offset printing, and printing inks.

HDK® N20Plus is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® N20Plus is a white colloidal powder of high purity. It finds applications in offset printing and powder coatings.

Wacker Chemie Silane M1-Trimethoxy is a clear, colorless liquid with the characteristic odor of alcohols. It is primarily used to provide water repellency to various surfaces and materials, such as mineral fillers, pigments, glass, and cardboard. Additionally, SILANE M1-TRIMETHOXY is employed in the manufacturing of silicone resins and condensation-curing silicone rubber. It also finds application in aqueous sol-gel coating systems to produce organic-inorganic hybrids.

DEHESIVE® 902 AMA® is a solvent-free, addition-curing silicone fluid formulated for release applications on paper and filmic substrates. It is an integral component of a multicomponent release coating used in the production of paper and filmic release liners. These liners are widely utilized in the manufacturing of single- and double-sided industrial laminates.

VINNOL® H 14/36 is a copolymer consisting of approximately 86 wt.% vinyl chloride (VC) and 14 wt.% vinyl acetate (VAc). Its primary application is as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physical drying process, forming a film as the solvent contained in the formulation evaporates.