Products in Industrial Maintenance

CLiQFLOW® 540 is highly efficient liquid thickener for aqueous systems. The ready-to-use neutralized productis based on a special acrylamide technology and shows excellent thickening efficiency over a large pH range from 2 –12.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

AROLON® 5900 is an acrylic polyol emulsion designed to be reacted with polyisocyanate. State-of-the-art twocomponent waterborne finishes can be formulated with AROLON® 5900 that offer excellent gloss with high distinctness of image (DOI) and can be applied in thick films (up to 3 to 5 dry mils). Very low VOC (~0.4 lb./gal.), easy dispersing (i.e., low shear or hand mixable) paint systems can be made for industrial maintenance, light industrial applications, DOT topcoats, or rail car topcoats. These coatings also demonstrate excellent flexibility while developing good hardness and good chemical resistance.

SOAL 530 F 55% are medium oil alkyds

Prasad International Pigment Red 2 is recommended for decorative paints.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Vibfast Red 4035 is a Organic Pigment.

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

ADDAPT® Anticor A84 is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of Organic Acids salts and Silanes. All constituents are EINECS registered and comply with the FDA regulation.

NOVALKYD M1026-50WS is suggested to formulate air drying enamels with good drying times, hardness and color retention combined with good adhesion to every surfaces.

Lithium Silicate-L is in anti-corrosion coatings containing finely divided zinc and as inorganic binders.

Benda-Lutz Leafing 1241 exhibits high surface tension due to which the pigment migrates towards the surface of paint film. This enrichment at the boundary protects the paint film from weathering, radiation and corrosion. Provides a strong reflective metal layer at the paint surface giving high metallic brilliance and gloss. Preferred applications include corrosion protection, reflective, maintenance, marine, roof, high heat resistance, chrome effect, and aerosol paints and coatings.

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

Easy Prime is the only surface tolerant, odor and solvent free, pure epoxy coating.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Unikyd L-100 offers a comprehensive array of synthetic resins including long, short, medium oil alkyds, hammertone medium, rosin modified, chain stopped & styrenated alkyds. Used in Primers, Under coats, Architectural finishes, Industrial enamels.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Vibfast Yellow 4012 is a Organic Pigment.

VOXCO CHROME YELLOW VOS-350 is suitable for use in Alkyd / Stoving, Industrial, Coil Coating, Powder Coating

Triune Chemicals and Materials LE-834 is semi solid type with higher molecular weight which can be widely used in all applications like Coatings, Adhesive, Casting, Composite, Civil Engineering and Electric and electronics fields..

A moderate defoamer with minimum side effects

DISPHERHIC D CHROMA WHITE PW 6 colorant is specifically designed for tinting high performance, non-aqueous, industrial and maintenance coatings. It is based on an unique universal resin technology (modified Ketone Aldehyde).

CLiQSPERSE127 is a highly efficient low foaming wetting agent for aqueous and non-aquoeus systems. The non-ionic modified polyglycolether block co-polymer is APE-and VOC-free.

PETOL 160-3 is a polyoxypropylene triol, 1055 average molecular weight. It is the standard polyol for one-component spray foams.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Admark Polycoats AP 1041LV is a low viscosity for high solid coating. its used in marine coating, protective coating and industrial coatings.

Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

Dynoadd® F-201ND is Flow and leveling additive for solvent borne coatings,Enhances flow and leveling Prevents surface defects, Aids air-release, Prevents flooding and floating, Non-silicone.

NOVALKYD M1462-50AN is a resin suitable for economical enamels with fast curing, hardness and colorretention. It is suitable to formulate flatting for wood and primers for metal with high corrosion resistance.

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.