Products in Industrial Maintenance

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability

Terachem® 53-2348 Light Gray is an acrylic urethane for high performance urethane and epoxy coatings.

Aluminium flake powder

BUP 630 is an un-promoted orthophthalic based unsaturated polyester resin with low color, medium viscosity, limited water absorption and very good mechanical properties for ambient temperature cure with MEK peroxide.

COSMOS BLUE PRPL-A is a modified alpha form blue phthalocyanine pigment with a very reddish shade and good dispersion properties. It is a opaque grade.

Vibfast Green 4070 is an Organic Pigment.

NOVACURE 6610 is an unsaturated polyester intended mainly for UV-curing systems. Acrylate freetechnology with low skin irritancy potential. Excellent chemical/stain resistance properties and good sandability. General-purpose resin used in combination with NOVACURE 6487.

AROFLINT® 809 is a high acid value polyester supplied at 71% solids in a HAPs compliant solvent blend. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

Hydroxyfunctional Acrylic resin

AROLON® 6473 is an acrylic polyol resin designed for use in high performance, two component polyurethane coatings. AROLON® 6473 is non-HAP and higher solids version of AROLON® 6472.

US Polymers - Accurez LLC Epi-Tex 199-E is oil modified epoxy ester which is used in concrete/wood maintenance, air dry/brush and roll formulations for metal/ masonry/ corrosion resistant.

Vibfast Yellow 4003 is a Organic Pigment.

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Antioxidants - Others

A moderate defoamer with Minimum side effects

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

Epilox F 17-00 is a liquid epoxy resin on the basis of bisphenol F and epichlorohydrin.

Aqueous styrene Acrylic emulsion

SUSPENO 201-X provides anti-settling, pigment suspension and sag control with no increase in apparent viscosity. SUSPENO 201-X is an organic compound that affects the rheology of fluid systems. Performance is achieved by highly efficient dispersions in pigmented coatings. Field experience shows marked improvement in brushing and leveling.SUSPENO 201-X is reliable and provides uniform performance, being neutral and is not dependent on activation by heat or chemicals. It is unaffected by the nature of the binder, oils, resins, varnishes or vehicles. SUSPENO 201-X has no effect on gloss, color, color retention, flexibility, cure time water and chemical resistance, adhesion or durability.

Yellow 1850 is a Colorant for Plastic, Paint, Ink and Stationery.

Thermoplastic Acrylic resin

Air-drying medium-oil alkyd resin

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

Vibfast Yellow 4015 is a Organic Pigment.

AROFLINT® 252-Z1-60 is a high acid value polyester supplied at 60% solids. It is used in combination with an oxirane-modified ester such as AROFLINT® 303-X-90, AROFLINT® 608 or EPOTUF® 607 at various ratios to yield high performance coatings where excellent appearance, durability and toughness are required.

Vinyl Copolymer Resin ELT-VA13 is a high molecular weight copolymer of vinyl chloride and vinyl acetate. It is supplied as a powder, the vinyl chloride content is about 86%, and vinyl acetate content about 13%. Good balance of chemical resistance, solubility, film strength and thermoplasticity and Adhesion to PVC substrates.

LIONOL BLUE 7255-PS is a modified alpha form phthalocyanine blue pigment with excellent dispersion properties,high color strength, a very bright reddish shade and very good rheological properties.

EPOTUF® 37-680 is an amine-functional emulsion which can be used to formulate two-component, waterborne epoxy systems with properties that approach conventional solvent-based two-component epoxy coatings.

Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

PM® 311 is 100% active polymeric dispersant designed to achieve a blue tone ultra high black for carbon black.It also shows very good result dispersing other organic pigments for superior tinting strength,gloss,and rheological property.