Products in Dispersing & Wetting Additives

XIAMETER(TM) PMX-200 Silicone Fluid 5 cSt is a polydimethylsiloxane fluid. It is commonly used as a base fluid in personal care products due to its excellent spreading characteristics. This product is clear, tasteless, essentially odorless, and non-greasy. Being a commercial bulk-polymerized dimethyl silicone fluid, it typically contains trace amounts of impurities.

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

STEPCOTE® W-846 stands out as an exceptional wetting agent ideally suited for waterborne coatings. Its versatile application encompasses both the letdown phase of production and post-formulation addition. While its primary function revolves around enhancing wetting properties, its potential impact extends to multiple essential coating attributes. These include gloss improvement, mitigating foam formation, bolstering temperature stability, enhancing color acceptance, and optimizing hiding characteristics.

MAKON® P105 is a nonionic eo/po block copolymer that exhibits good oil-in-water emulsification properties. It can be used in a variety of markets, including agriculture, industrial, and paints and coatings. Applications for best fit are agricultural pesticide formulations, dispersants, emulsifiers, and industrial cleaning.

BIO-SOFT® N25-12 is a c12-15 linear alcohol ethoxylate with moderate wetting and moderate foam. It also provides emulsification, detergency, and excellent wetting. It can be used in laundry detergents, textiles, hard surface cleaning, paints, and institutional and industrial applications. The product is kosher-certified and preservative-free.

STEPCOTE® W-805 excels as a potent wetting agent designed for waterborne coatings. Its integration can occur during the letdown phase of production or as an addition after the final formulation. While its primary function revolves around optimizing wetting properties, its beneficial effects extend to several pivotal coating attributes. These encompass gloss enhancement, mitigating foam formation, bolstering temperature stability, augmenting color acceptance, improving wet scrub resistance, promoting hiding characteristics, and enhancing washability.

STEPCOTE® W-839 stands as a powerful wetting agent meticulously designed for waterborne coatings. Its applicability extends to both the letdown phase of production and post-final formulation integration. While its core function revolves around optimizing wetting, it holds the potential to significantly influence key coating attributes, including gloss, high-temperature block resistance, color acceptance, and hiding properties.

BIO-SOFT® N91-8 is a c9-11 linear alcohol ethoxylate with an hlb of 13.9, suitable for oil-in-water formulations. It offers fast wetting and high foam, even in high-temperature cleaning, due to its elevated cloud point. With applications spanning laundry detergents, textiles, hard surface cleaning, paints, and institutional and industrial cleaning, it complies with the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.

STEPSPERSE® 250 is a nonionic polymeric dispersant used for dispersing carbon black in waterborne systems. No wetting agents are necessary. Typical loading levels are 4-8% solids on the weight of pigment (mass of dispersant used/mass of pigment used x 100%). A ladder study is advised to determine optimal dosage levels.

BIO-SOFT® N91-2.5 is a c9-11 linear alcohol ethoxylate featuring a low hlb. This versatile product offers rapid wetting, low foam, emulsification, and detergency. Its applications span laundry, textiles, hard surface cleaning, machine-based cleaning, paints, carpet cleaning, and institutional and industrial cleaning contexts.

G-3300 operates as an anionic surfactant with versatile applications. It is employed as a pigment dispersant in both water- and oil-based paints. Additionally, it serves as an effective wetting agent suitable for waterborne coatings. Its integration can take place during the letdown phase of production or through post-addition to the final formulation. The potential positive effects encompass gloss enhancement, improved color acceptance, and enhanced washability.

STEPCOTE® W-133 proves to be an efficient wetting agent suited for waterborne coatings. Its integration can occur during the letdown phase of production or post-formulation. While its primary role is enhancing wetting properties, it holds the potential to favorably impact numerous critical coating attributes, including gloss, temperature stability, color acceptance, wet scrub resistance, hiding, and washability.

MERPOL® A is an alcohol phosphate that offers attributes such as low foam generation, effective wetting, and reliable emulsification. It serves a range of applications, including metal processing, composite handling, printing ink manufacturing, and coatings. Classified within the chemical group of alcohol phosphate esters, its functions encompass being a plastic anti-static agent, pigment dispersant, and textile lubricating agent.

BIO-SOFT® N25-9 is a c12–15 linear alcohol ethoxylate with a high hlb, offering emulsification, moderate foam, detergency, and excellent wetting. Its high cloud point promotes formulation clarity. This product is commonly used in laundry detergents, textiles, hard surface cleaning, paints, and institutional and industrial cleaning applications.

MAKON® 25R2 stands as a notable nonionic reverse EO/PO block copolymer, prized for its swift-breaking, low foaming, and defoaming capabilities. Its versatility extends across a spectrum of industries where its unique properties find diverse applications and contribute to enhanced performance and efficiency.

BIO-SOFT® N1-3 is a c11 linear alcohol ethoxylate with a low hlb value, offering emulsification, low foam, detergency, and wetting properties. Its versatility shines in oil-in-water formulations, making it suitable for textiles, automatic dishwashing detergents, hard surface cleaning, paints, and institutional and industrial cleaning.

STEPCOTE® W-806 excels as a potent wetting agent designed for waterborne coatings. Its integration can occur during the letdown phase of production or as an addition after the final formulation. While its primary function revolves around optimizing wetting properties, its beneficial effects extend to several pivotal coating attributes. These encompass gloss enhancement, mitigating foam formation, bolstering temperature stability, augmenting color acceptance, improving wet scrub resistance, promoting hiding characteristics, and enhancing washability.

POLYSTEP® TD-9 PE is an ethoxylated phosphate ester, serving as both an emulsifier and a post-additive in paints and coatings. This surfactant is categorized as a kosher-certified product, aligning with kosher dietary laws. Its versatile applications include the manufacturing of latex, offering benefits in terms of emulsification and performance.

MAKON® L64 is a nonionic eo/po block copolymer displaying low foaming, good detergency, and water solubility. Its range of applications spans household, industrial, institutional, agriculture, paints and coatings, metalworking, pulp and paper, and textiles. Its suitability is evident in laundry, floor cleaning, food processing, rinse aids, pulp and paper, and agricultural pesticide formulations. It also maintains a low ash content, consistent with other products in the makon® line.

STEPSPERSE® 160S is an anionic polymeric dispersant suitable for dispersing phthalo blue pigment systems in waterborne applications. No wetting agents are necessary. Typical loading levels are 10–15% solids on the weight of pigment (mass of dispersant used x mass of pigment used x 100%). A ladder study is advised to determine optimal dosage levels.

ZELEC® A130 can be used as a wetting agent in the paint and coating industries. In this application, it could also contribute to the improvement of corrosion resistance, gloss, color acceptance, wet scrub resistance, and the hiding power of the film. It can also be used as an antistatic agent in textile and leather finishing and processing and in rubber, plastic, and composite processing. It can also act as an emulsifier and corrosion inhibitor in metalworking fluid, printing pressrooms, and oil fields. It can also be used as a demolding agent in a construction area and in rubber, plastic, or composite processing. It also has lubrication properties for metalworking fluids and textile and leather finishing and processing, including extreme-pressure and anti-wear properties.

STEPCOTE® W-119 is an effective wetting agent for use in waterborne coatings. It can be incorporated during the letdown phase of production or added after the final formulation. Although it is primarily a wetting agent, it may positively impact the following coating properties: gloss, low foaming, color acceptance, hiding, and washability.

STEPWET® DOS 50NC is an anionic surfactant able to provide very good wetting properties for aqueous systems. It enables the reduction of surface tension to extremely low levels. It is suitable for emulsion polymerization as a primary emulsifier and/or post-additive to latex, as well as a paint additive for coatings.

STEPCOTE® W-849 stands as a formidable wetting agent designed for waterborne coatings. Its incorporation can happen during the letdown phase of production or after final formulation. Despite its primary role being a wetting agent, its influence extends positively to crucial coating properties such as gloss, color acceptance, wet scrub resistance, hiding, corrosion resistance, and washability.

STEPCOTE® W-722 excels as a potent wetting agent designed for waterborne coatings. Its integration can occur during the letdown phase of production or as an addition after the final formulation. While its primary function revolves around optimizing wetting properties, its beneficial effects extend to several pivotal coating attributes. These encompass gloss enhancement, mitigating foam formation, bolstering temperature stability, augmenting color acceptance, improving wet scrub resistance, promoting hiding characteristics, and enhancing washability.

BIO-SOFT® N1-7 is a c11 linear alcohol ethoxylate delivering fast wetting, moderate to high foam, emulsification abilities, and effective detergency. Its application spans laundry detergents, textiles, hard surface cleaning, paints, and institutional and industrial cleaning. It meets the u.S. Epa safer choice program's surfactant screen and cleangredients listing, ensuring environmental and safety compliance.

BIO-SOFT® N1-5 is a c11 linear alcohol ethoxylate with a low pour point that provides fast wetting, detergency, and low to moderate foam. This product finds application in laundry detergents, textiles, paint, and hi&i cleaning applications. The product is kosher-certified and preservative-free.

BIO-SOFT® N23-3 is a c12-13 linear alcohol ethoxylate that provides moderate wetting, low foam, emulsification, and detergency. With a low hlb, this product can be used in textiles, hard surface cleaning, paints, and institutional and industrial cleaning applications. The product is kosher-certified and preservative-free.

STEPSPERSE® 163P is an anionic polymeric dispersant suitable for iron oxide pigments in waterborne applications. No wetting agents are necessary. Typical loading levels are 2–4% solids on the weight of pigment (mass of dispersant used/mass of pigment used x 100%). A ladder study is advised to determine optimal dosage levels.

STEPCOTE® W-821 serves as a high-performing wetting agent tailored for waterborne coatings. Its utility spans both the letdown phase of production and post-final formulation addition. While its primary role centers on wetting enhancement, it also holds the potential to impart favorable effects on crucial coating properties, encompassing gloss, color acceptance, wet scrub resistance, and hiding.

STEPCOTE® W-125 serves as a highly effective wetting agent suitable for utilization in waterborne coatings. It can be integrated either during the letdown phase of production or added after the final formulation. While its primary role is as a wetting agent, it might also exert a positive influence on various coating properties such as gloss, low foaming, and color acceptance.

ZELEC® A081 is an alcohol phosphate that can be used to help decrease the viscosity of high-pressure compounds. It can also be used to reduce and stabilize viscosity and act as a color stabilizer in rubber. It also plays the role of a lubricant additive for plastic materials and provides antistatic properties in fiber lubricating oils. It can also be used as a spreading agent for oils and waxes and as an internal demolding agent for molding plastic and pultrusion. It is an additive that inhibits deposits of a corrosive nature during the soldering of light metals (aluminum and magnesium) and can be used in construction as a concrete additive. It is also used as a dispersing agent in ink formulations.

STEPCOTE® W-888 emerges as a highly efficient wetting agent tailored for waterborne coatings. Its inclusion can occur during the letdown phase of production or as an addition after the final formulation. While its core role centers on optimizing wetting characteristics, it is also capable of exerting favorable effects on a range of critical coating properties. These encompass gloss enhancement, augmenting color acceptance, improving wet scrub resistance, promoting hiding characteristics, and bolstering corrosion resistance.

MAKON® DA-6 is a high-active nonionic surfactant that excels in emulsification, moderate foam generation, detergency, and excellent wetting properties. It has a broad spectrum of applications, including laundry, textiles, hard surface cleaning, paints, carpet cleaning, hand dishwashing, and institutional and industrial cleaning formulations. Importantly, makon da-6 aligns with the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.

MAKON® P104 is a nonionic eo/po block copolymer that excels in oil-in-water emulsification. Its application spans across multiple industries, including agriculture, industry, paints, and coatings. Its contribution is prominent in agricultural pesticide formulations, as well as serving as a dispersant and oil-in-water emulsifier.

MAKON® L61 is a nonionic eo/po block copolymer known for its low foaming, defoaming, and water-in-oil emulsification attributes. Its versatility spans markets like household, industrial, institutional, agriculture, paints and coatings, metalworking, and textiles. It finds usage in areas such as defoaming, metal cleaning, spray washing, warewashing, general-purpose cleaning, textile wetting and scouring, agricultural adjuvants, and non-foaming emulsions. It is another product within the makon® line, featuring low ash content.