Products in CASE Ingredients: Pressure Sensitive Adhesive

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 107 is a derivative of gum rosin obtained by chemical treatment to reduce the abietic acid content. It is used as a tackifier for pressure-sensitive adhesives, manufacture of SBR and other synthetic rubbers, and is an important component for making potassium soaps and ABS, etc.

Flytac 102 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flyprene SIS 1209 is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 29% (wt.%). It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flyprene SBS 792 is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 40% (wt.%). It is used in asphalt modification, and as a waterproofing material. This product may also find use as a modifier for polymers and adhesives.

Flyprene SIS 1105 is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15% (wt.%). It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flyprene SIS 1126 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 16% and 50% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flytac 188 is a light yellow aliphatic hydrocarbon resin. It is polymerized by high-purity 1.3-pentadiene and designed as a tackifier in hot melt/pressure-sensitive adhesives. This product has good heat resistance, light odor, and good compatibility with polymers like SBS, SIS, SEBS, EVA, SBR, NR, and polyisobutylene.

Flytac 191’s is obtained by hydrogenating cracked C5 to achieve high-quality, multi-purpose, water-white thermoplastic hydrocarbon resin. This C5 hydrogenated hydrocarbon resin is mainly used for hot melt adhesives, and hot melt pressure sensitive adhesive tackifiers. It has good thermal stability, low odor, and good compatibility with SIS, APAO, etc.

Flyprene SIS 1124 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 14% and 25% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 102 - 100 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 102 - 100F is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 106 - P is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flytac 106 - F is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Gelest SILANOL TERMINATED POLYDIMETHYLSILOXANE, 50,000 cSt (DMS-S45) functions as an intermediate, binder, and resin.

Flyprene SIS 1106 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 15% and 17% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flytac 192 is a water-white thermoplastic resin obtained from the polymerization of aromatic and hydrogenation. It is widely applied in hot melt adhesive (HMA), and pressure sensitive adhesive (PSA) because of its good heat resistance and good compatibility with base polymers such as SIS, EVA, SBS, SEBS, and polyolefin. It can also be used in road marking, BOPP masterbatch, and rubber compounding.

AFCONA 5504S is a multi-functional additive that can help wet out difficult or contaminated substrates, lower the surface tension of the coating system, improve pigment grind efficiency, and prevent surface defects such as fisheyes, edge crawl, and craters. Furthermore, its great defoaming properties reduce water sensitivity of the final system due to its hydrophobic nature.

Dar-Tech Hauthane L-2183 is an anionic, aliphatic, aqueous polyurethane dispersion. It is an adhesive grade polyurethane suggested for modifying industrial laminating adhesives. L-2183 may also be used in low tack pressure-sensitive applications. This grade can be used as supplied or blended with vinyl acetate/ethylene, styrene butadiene, and acrylic emulsions. The rheology of L-2183 may be modified with associative or acrylic thickeners for knife-over-roll or similar methods.

AFCONA 5504 is a multi-functional additive that can help wet out difficult or contaminated substrates, lower the surface tension of the coating system, improve pigment grind efficiency, and prevent surface defects such as fisheyes, edge crawl, and craters. It also has great defoaming properties and, due to its hydrophobic nature, reduces the water sensitivity of the final system.

DeCAL 1201 is a powder-grade rheological control additive that can be used in a wide range of water-based systems. The product is designed to disperse and rapidly wet out in aqueous systems. Alternatively, the product can be incorporated into powder blends and formulations.

SperseStab™ 2702 is a highly efficient antioxidant with a molar efficiency twice that of BHT and a significantly higher TGA. It is effective in non-color-critical adhesive applications and can be combined with other antioxidants and UV stabilizers. With its relatively high TGA, SperseStab™ 2702 can be used in a variety of applications, from PCMO to hydraulics, metalworking, and other lubricating systems. It can also be used in natural and synthetic elastomers, as well as resins and adhesives.

SperseStab™ 6092 is a 100% active liquid stabilizer designed for liquid color concentrates. This product is formulated to provide UV protection to polyolefins, urethane systems, and plasticized PVC. As a liquid, it is easily incorporated and provides excellent weatherability at an economical price. In polypropylene and HDPE, it provides a significant improvement over 292 at the same level of use.

Hauthane L-2183 is an anionic, aliphatic, aqueous polyurethane dispersion. Features: Low activation temperature (200° F). Can be crosslinked to improve bond strength and heat-resistance. Non-crystalline nature. Contains n-methyl pyrrolidone co-solvent.

Vinavil 2440 is a vinyl/acrylic copolymer emulsion suitable for pressure-sensitive adhesives.

Vinavil 4829 is a pure acrylic copolymer emulsion designed for use in premium elastomeric roof coating formulations. It can also be used in elastomeric wall coatings and pressure-sensitive adhesives.

Vinavil 2841NA is an ammonia-free, high in solids pure acrylic polymer emulsion with high peel adhesion. It also coats well on silicone-coated release paper.

Hauthane L-2183 is an anionic, aliphatic waterborne polyurethane dispersion.

Vinavil 5706 is an elastomeric copolymer styrene acrylic with high solids content.

Vinavil 5713 is a styrene/acrylic copolymer emulsion, free from alkylphenol ethoxylates (APEO-free).

Vinavil 2841 is a high solids pure acrylic polymer emulsion with high peel adhesion. It coats well on silicone-coated release paper.

Rovene 4310 is a medium soft carboxylated styrene-butadiene emulsion designed for formulation of general purpose labels and construction adhesives. It is used in the formulation of general purpose labels and construction adhesives which provide excellent adhesion to a variety of substrates. Rovene 4310 has compatibility with a wide variety of commercial tackifier resins and has excellent filler tolerance.

Rovene 9410 is a very soft carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive adhesives. It is used in the formulation of pressure sensitive adhesives with a wide variety of tackifiers. Rovene 9410 has a unique balance of molecular weight and styrene content, which makes it ideal for blending with natural rubber and formulation of low temperature adhesives.

Rovene 6105 is a very soft carboxylated styrene-butadiene emulsion specifically designed for formulation of pressure sensitive adhesives. It can be formulated into a pressure sensitive adhesives that requires a minimum amount of tackifier. Rovene 6105 was designed to give excellent performance and compatibility with a wide variety of dispersed tackifiers.