Products in CASE Ingredients: Powder Coating

DCL AG100 Silver, 10 - 60 m is a silver-white transulcent pearlescent pigment with a brilliant finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

DCL AG323 Royal Satin, 5 - 25 m is a gold pearlescent pigment with a satin finish. It is FDA approved (Section 178-3297). This product is mainly used in the following applications Plastics such as PVC, PP, PS, PE and PET. Powder and industrial coatings. UV and offset inks. Rubber

DCL 8130M Syn Micronized Red Iron Oxide, PR.101 is a micronized synthetic red iron oxide. 8130M is less yellow than 8110M and is FDA-approved. It exhibits good overall lightfastness, weather fastness, and heat stability, making it a reliable and versatile choice for a range of coating and plastic applications.

DCL 5352 Phthalocyanine Blue, PB.15:2 is an alpha, red-shade phthalocyanine blue that has been treated to provide crystal stability and flocculation resistance with outstanding fastness properties. It is approved by the FDA (Section 178.3297) and is used in general high-grade industrial and agricultural equipment, architectural coatings, and powder coatings.

DCL 1610 Molybdate Orange, PR.104 (stir in), is a pre-darken yellow shade molybdate orange pigment with stir-in properties used in plastic and coating applications where excellent weather fastness is required. This product is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

Ultrablue® 2108, PB.29 (E-62, 5151) is a low sulfur, low moisture ultramarine blue. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic, coating, rubber, and paper applications.

DCL AG153 Flashing Silver, 10 - 25 m is a silver-white transulcent pearlescent pigment with a glittery finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

DCL 1032 Lemon Yellow, PY.34 is a standard lemon chrome yellow pigment used in plastic and coating applications. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

HIFILL® 15 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

DCL Blue 424 is a turquoise-blue powder produced by high-temperature calcination with good UV and visible opacity, chemical inertness, heat resistance, and stability to ultraviolet light. It is non-bleeding, non-migratory, and has exceptional durability and hiding power. It is generally used in applications requiring resistance to heat, light, and weather, and is compatible with most resin systems and polymers, while being nonwarping. Typical applications include liquid and powder coatings, inks, dispersions, concrete, plastics, and others that use equivalent pigment chemistry.

Hi-Sil® T-600 is a thickening agent that belongs to PPG's Hi-Sil® product line of synthetic, amorphous, precipitated silicas that are rheology modifiers and anti-sag/suspension agents. Hi-Sil® T-600 is a premium grade thixotrope designed specifically for adhesive and sealant applications. Its unique physical characteristics make Hi-Sil® T-600 thickening agent a more efficient and cost-effective alternative to fumed silica in certain applications.

Ultrablue® 6120, PB.29 (G-58, 5005) is a low sulfur, low-moisture ultramarine blue pigment. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.

DCL AG173 Silk, 10 - 60 m is a silver-white transulcent pearlescent pigment with a brilliant finish. This product is a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

DCL 1036 Lemon Yellow, PY.34 (stir in) is a standard lemon chrome yellow pigment with stir-in properties used in plastic and coating. The applications of this product are estricted to industrial and professional inks, coatings, plastics, and roadmarking (subject to regional legislation).

DCL 1014 Medium Yellow, PY.34 is a standard medium chrome yellow pigment. This pigment is recommended to be used for plastics such as polyvinyl chloride(PVC), polyethylene (PE) and polypropylene (PP), along with automotive, aerospace, industrial, and powder coating applications.

DCL 1013 Medium Yellow, PY.34 is standard medium chrome yellow pigment used mainly for plastic and coating applications. It has good overall resistance properties. This pigment finds major applications in the following: Plastics such as PVC, PP and PE. Automotive/aerospace, powder and industrial coatings.

HIFILL® 1 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

DCL 1001 Medium Yellow, PY.34 is a standard medium chrome yellow pigments used in plastic and coating applications. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

Dar-Tech Portaryte® B5 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Dar-Tech Portaryte® is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Fine grades of Dar-Tech Portaryte® fillers have been specially developed for powder coating applications. They are successfully used as an alternative for fine synthetic blanc fixe in high-gloss applications.

DCL AG123 Fine Satin Silver, 5 - 25 m is a silver-white transulcent pearlescent pigment with a satin finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

Ultrablue® 3111, PB.29 (F-36, 6308) is a low sulfur, low-moisture ultramarine blue pigment. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.

Minex® 3 belongs to the Minex® range of functional fillers and extenders, which are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. With its use, excellent brightness, tint retention, and weatherability can be achieved in exterior paints. In interior paint formulations, it improves color, sheen uniformity, chemical and stain resistance, and durability. This product is easily dispersed in all conventional vehicle systems. Its low oil absorption permits high loadings in adhesives, sealants, and aqueous- and alkyd-based paints.

DCL Black 10G903 is a black powder produced by high-temperature calcination. It is IR reflective, has good UV and visible opacity, high infrared reflection, is chemically inert, heat-resistant, and stable to ultraviolet light. It is non-bleeding and non-migratory, has low heat build-up, and has exceptional durability and hiding power. It is compatible with most resin systems and polymers and is non-warping, and is typically used in applications such as liquid and powder coatings, inks, dispersions, and plastics where resistance to heat, light, and weather are needed.

HIFILL® 3 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

DCL AG522 Red Brown Satin, 5 - 25 m is a reddish-shaded brown pearlescent pigment with a satin finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

Ultrablue® V8B2, PV.15 (V-8, 5012) is a low sulfur, low moisture ultramarine violet pigment. This product is mainly used in the following applications: Plastics such as PVC, PP, PS and PE. Powder and industrial coatings. Rubber and paper products Cosmetics applications

DCL 1005 Medium Yellow, PY.34 is a standard medium chrome yellow pigment used in plastic and coating applications. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

Minex® 4 belongs to the Minex® range of functional fillers and extenders, which are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. With its use, excellent brightness, tint retention, and weatherability can be achieved in exterior paints. In interior paint formulations, it improves color, sheen uniformity, chemical and stain resistance, and durability. This product is easily dispersed in all conventional vehicle systems. Its low oil absorption permits high loadings in adhesives, sealants, and aqueous- and alkyd-based paints.

Dar-Tech Portaryte® C30 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Dar-Tech Portaryte® C is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Ultrablue® 3010, PB.29 (C-84) is an ultramarine blue pigment with low sulfur and moisture content. It is FDA-approved (Section 178-3297) and exhibits goo resistance properties, lightfastness, weather fastness, and heat stability. UltraBlue 3010 is highly versatile and suitable for use in a wide range of applications, such as coatings, plastics, paper, and rubber.

Ti-Pure™ R-902+ is a multipurpose rutile titanium dioxide pigment manufactured by the chloride process for both interior and exterior coating applications. It is designed to work well in a variety of applications by balancing pigment performance with improved productivity for manufacturers.

Ultrablue® 2320, PB.29 (E-28, 5008/6108/6128) is a low sulfur, low moisture ultramarine blue pigment. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.

Dar-Tech Portaryte® B50/10 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Dar-Tech Portaryte® is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Fine grades of Dar-Tech Portaryte® fillers have been specially developed for powder coating applications. They are successfully used as an alternative for fine synthetic blanc fixe in high-gloss applications.

DCL 1003 Medium Yellow, PY.34 is a standard medium chrome yellow pigment used in plastic and coating applications. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

DCL AG500 Bronze, 10 - 60 m is a bronze pearlescent pigment with a brilliant finish. It is FDA approved (Section 178-3297). This product is mainly used in the following applications Plastics such as PVC, PP, PS, PE and PET. Powder and industrial coatings. UV and offset inks. Rubber

DCL AG302 Satin Gold, 5 - 25 m is a gold transulcent pearlescent pigment with a satin finish and is FDA approved (Section 178-3297). This pigment finds major applications in the following: Plastics such as PVC, PP. PS, PE and PET. Powder and industrial coatings. UV and offset inks Rubber products