Products in Monomers

PHOTOMER® 4149 TF is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an unusually effective reactive diluent with excellent solvency and viscosity reducing characteristics in radiation curable formulations based on epoxy, polyurethane, and polyester oligomers.

Purol® R-06 has Phthalic Andydride base used as adhesives, PUR hot melts, PU coatings, PU rigid foam, Elastomers.

PL-3122 Propoxylated Tetrahydrofurfuryl Acrylate is a monofunctional monomer providing good adhesion to plastics and low viscosity.

PHOTOMER® 2012 (IBOMA) is a very low viscosity monofunctional methacrylated monomer which can be polymerized in the presence of free radicals. It is typically used in UV and EB curable applications.

ELAPOL 11117 B is a linear, saturated polyester polyol by Elachem. It is manufactured with synthetic aromatic, aliphatic acid and diethylene glycol (DEG).

MERACRYL™ GMAA is used as building block in applications like paints, dispersions or construction chemicals. It confers specific properties, such as improved freeze-thaw resistance, colloidal stability in emulsion, and enhanced film adhesion.

Volant-Chem N,N-Dimethylacrylamide is Monomer used in production of UV-curing ink and coating, as well as cementing agents.

PHOTOMER® 4046 is a proprietary acid mono functional monomer with medium viscosity. It exhibits excellent adhesion combined with hydrophobic characteristics when used in UV/EB cure laminating adhesives, coatings and inks formulations for various porous and non-porous substrates. It is tested to be non-corrosive.

PHOTOMER® 4226 (DPGDA) is an aliphatic difunctional acrylate of low viscosity used as diluent for UV and EB radiation curable formulations.

PL-3214B is a difunctional reactive monomer that provides excellent diluecy as well as water resist. and weathering prop.

PL-3208 Ethoxylated Bisphenol A Dimathacrylate is a difunctional monomer providing low volatility and flexibility.

UVP 0302, Ethoxylated(3) Trimethylol propane triacrylate (Etho .TMPTA) is a low viscosity liquid monomer with fast cure response and low volatility during free radical polymerization.It has a low skin irritancy.

UVP 0303, Di-­Trimethylol propane tetracrylate (DiTMPTA) is a liquid monomer with fast cure response and low volatility during free radical polymerization.It has a low skin irritancy and high cross density upon curing.

PL-3102 is a monofuctional monomer that provides water resistance and flexibility.

ELAPOL 11108 B is a linear, saturated polyester polyol by Elachem. It is manufactured with synthetic aromatic, aliphatic acid and diethylene glycol (DEG).

PHOTOMER® 4050 is an aliphatic difunctional acrylate of low viscosity, low volatility, good flexibility and reactivity. It is an effective reactive diluent with good viscosity reducing and solvency characteristics for a wide range of radiation curable acrylated oligomers and prepolymers.

UVP 0104 99 is a clear liquid with low viscosity and good solvency.

Meracryl™ Hema 98 is a functional monomer that can copolymerize with other monomers to produce copolymers with a hydroxy group in the side chain. Hydroxyesters are recommended for heat or room temperature cured coatings with permanent marring and solvent resistance, high gloss retention and weatherability.

ELAPOL 9010 A is a linear, saturated polyester polyol by Elachem. It is manufactured with synthetic aliphatic acid and 1,4 butanediol and neopentyl glycol.

PL-3300A is a trifunctional monomer that provides hardness and cure speed.

CE CRYL HDDA is a Hexane-diol Diacrylate Monomer.

Polymer Chemistry Innovations ETOX is An Organic Intermediate and Monomer Etox (2-ethyI-2-oxazoIine) is an organic intermediate and monomer that is used in water-soluble polymers, pharmaceuticals, cosmetics, specialty coatings and adhesives,bactericides and herbicides..

UVP 0301 is an aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy,

Meracryl™ HPMA 98 is a functional monomer that can copolymerize with other monomers to produce copolymers with a hydroxy group in the side chain. Hydroxyesters are recommended for heat or room temperature cured coatings with permanent marring and solvent resistance, high gloss retention and weatherability.

ADDAPT PolySurF ACE is a solvent free polymerisable additive. It imparts benefits like: acid resistance, high gloss, excellent pigment wetting, water repellence, film appearance, UV stability and improved adhesion to thermoplastics. It is the Acrylic Acid adduct of the epoxy ester of Versatic Acid.

EC-861 is a phenyl acetate epoxy curative. When cured with an epoxy, the resulting thermoset displays a high level of toughness and flexibility. The monomer is hydrophobic by nature and results in more hydrophobic thermosets. The low viscosity (which can result in lower viscosity in final products) makes it an ideal monomer to formulate in epoxy resin systems. The phenyl acetate end group, unlike phenolics, does not interfere with free-radical cure in hybrid adhesive systems.

MPD Industries UVP 0203 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is a high boiling monomer with low vapor pressure.It is compatible with a wide range of acrylated resins.

PL-3116A is a monofunctional monomer providing good adhesion, high Tg, and low viscosity.

PL-3201 Polyethylene Glycol 200 Dimethacrylate is dimethacrylate difunctional monomer. It's used in 3D printing,Adhesives and Sealants applications. It provides excellent adhesion, flexibility and impact strength.

ELAPOL 4010 A is a linear, saturated polyester polyol by Elachem. It contains aliphatic acid & diethylene glycol (DEG).

ELAPOL 6520 B by Elachem is a linear, saturated polyester polyol. It contains aliphatic acid, 1,6-hexanediol and (NPG) neo-pentyl glycol.

PL-3301 Trimethylolpropane Triacrylate is a trifunctional monomer that provides harness and cure speed with low irritation.

PHOTOMER 4307 is a high boiling point monomeric liquid with a relative low viscosity. PHOTOMER 4307 is a tetra functional monomer which under exposure to ionizing radiation or added sources of free radicals undergoes polymerization.

PL-3218 is a difunctional monomer providing low viscosity and high boiling point.

Guangzhou Chemical 2-Hydroxy Propyl Acrylate can be used in a variety of ways to produce resins that are useful in high performance coating applications. Using typical methods for the polymerization of ethylenically unsaturated monomers, hydroxypropyl acrylate (HPA) can be used to attach hydroxyl groups to an acrylic polymer backbone. The pendant hydroxyl groups can then act as sites for reaction with a variety of cross-linking agents. HPA allows faster curing cycles and/or reduced baking temperatures, compared with hydroxyalkyl methacrylates. Also HPA can be formulated at higher solids in coating applications.

Basis® F15 has Adipic Acid base used as adhesives, PU coatings, PU shoe soles, elastomers, PU flexible foam.