Products in Base Chemicals & Intermediates: Heat Resistance

POLYSORB® PS A is a solid pastille product with a monomer and intermediate function. It is known for its high purity, and its base chemical properties encompass heat resistance and high hardness. This product is primarily targeted at industrial markets and finds applications in chemical and industrial manufacturing, as well as resin manufacturing. The end uses for its base chemicals include plasticizers, polyols, and solvents.

WACKER® AK 0,65 is a hexamethyldisiloxane. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits good dielectric properties, low surface tension, high surface activity, and is chemically highly unreactive. Additionally, it has a low solidifying point.

AEROXIDE® Alu C is a fine-particulate, pure aluminum oxide (Al₂O₃) with high specific surface area and marked aggregate and agglomerate structure. Because of it high purity and low water content, the product can be used well as an additive to anorganic materials, for heat insulation, and also as a catalyst substrate. The positive surface charge can be used to control the electrostatic charge.

FENOL KIMYA Calcium Stearate is a non-toxic heat stabilizer and internal lubricant in the production of PVC profiles.

Mason Corporation Stannic Chloride Solution 50% is a Tin Tetrachloride solution or Tin (IV) Chloride solution. It is a clear to a pale yellow aqueous solution and its applications are similar to Stannic Chloride Anhydrous.

GH Chemicals CR-42 has a fine particle size and French Process Zinc Oxide grades are differentiated by surface area or particle size.

FerSiN® is a composite obtained from the nitriding of Ferro Silicon. It has relevant thermal and mechanical characteristics. It is used as a raw material in Tap Hole in blast furnaces to obtain a material with high resistance to heat and low corrosion rate. When applied in steel it increases the mechanical and corrosion resistance and in paints it raises the thermal resistance. Available in different grades, from lump material to 325 mesh.

Altivia Alpha-Methylstyrene (AMS) is a colorless liquid organic chemical used to produce a wide variety of styrenic polymers. AMS adds heat resistance to ABS resins which can be found in automotive parts, electronic appliance housings and protective coatings. AMS is also used to improve the impact and heatresistant properties of certain polymers, including specialty grades of plastic, rubber, and adhesives. AMS is used in the production of para-cumylphenol, a specialty intermediate for thermoplastics and polycarbonate resins.

VDM® Powder 780 is the powder variant of an age-hardenable nickel-cobalt-chromium alloy for use in additive manufacturing. Hardenability is achieved by means of admixtures of niobium, titanium and aluminum.

Hubei Green Home Chemical LS-692 is colorless or slight yellowish transparent liquid,slight flavor, low-virulence, low-volatility and good chemical stability. It contains rigid segments in the structure.

BariteWorld Crystalline Flake Graphite is the most anisotropic of natural graphites, with excellent parting ability and heat conductivity. The flakes are thought to be centers of crystalline growth in rich organic shales or limestone that were activated by pressure and heat. Flake graphites are chosen based on characteristics such as size, carbon content, softness, heat resistance, and alkalinity.

GH Chemicals CR-3 are zinc oxide grade that has a large particle size. French Process Zinc Oxide grades are differentiated by surface area or particle size.

Trioctyl trimellitate (TOTM) is a heat-resistant and durable plasticizer for polyvinyl chloride, commonly used in 105°C cable materials and other heat-resistant products. It has the advantages of polyester plasticizer and general plasticizer. In addition to oil-resistant applications, it can be used for any products that require durability.

GH Chemicals CR-4 has a medium particle size. French Process Zinc Oxide grades are differentiated by surface area or particle size.

Dioctyl Sebacate (DOS) is an excellent cold-resistant plasticizer with high plasticizing efficiency, low volatility, good heat resistance, light resistance and electrical properties. Mainly used for polyvinyl chloride, vinyl chloride copolymer, cellulose and synthetic rubber. It has high mobility and is often used in combination with phthalates.

FENOL KIMYA Lead Stearate is used as a tooth lubricant by providing heat resistance in the production of PVC profiles.

Mason Corporation Stannic Chloride Anhydrous is a clear, colorless, heavy fuming liquid. It fumes in moist air to form basic chloride, solid and semisolid hydrates and liberates vapors of hydrogen chloride. It is miscible with most hydrocarbons and chlorinated hydrocarbons. It is of the highest purity found in the world with no free chlorine present in the final product.

Dalian Yuanyong Organosilicon Phenyl Siliconegum (HTV) in addition to vinyl silicone rubber with a series of features, but also has excellent low temperature resistance, irradiation resistance, burning resistance and self-extinguishing. It is one of the important material of aerospace industry, cutting-edge technology. Can be used for all kinds of molding and extrusion products, used in hardy and resistant to burning, heat aging and radiation resistant parts of the sealing ring, gasket, pipe, bar. Can also be used to manufacture all kinds of special purpose products, such as: making damping materials, pressure sensitive adhesive.

Di-n-butyl sebacate (DBS) has good compatibility and can be compatible with many resins such as polyvinyl chloride, vinyl chloride and vinyl acetate copolymer, polystyrene, nitrocellulose, etc. This series of cold-resistant plasticizers has high plasticizing efficiency, good thermal and light stability, but high volatility, and is often used in combination with phthalate plasticizers with good durability.

Kish Company Titanium Dioxide is offered in Rutile and Anatase grades. Our KRT Rutile grades are available in with a number of inorganic and organic surface treatments. The KRT Titanium dioxides have excellent dispersion, hiding power, chalk resistance and heat resistance.

Diisobutyl Sebacate (DIBS) has good compatibility and can be compatible with many resins such as polyvinyl chloride, vinyl chloride and vinyl acetate copolymer, polystyrene, nitrocellulose and so on. This series of cold-resistant plasticizers has good plasticizing effect, good thermal and light stability, and is often used in combination with phthalate plasticizers with good durability.

GH Chemicals CR-41 has a higher reactivity and French Process Zinc Oxide grades are differentiated by surface area or particle size.

N-Ethyl-2-Pyrrolidone is one kind of strong polar organic solvent. It has the high chemical stability, the weak basicity, and the high dissolving power, lowly steams characteristic, steam pressure and low coefficient of dielectrical loss. It may also serve as the highly effective selective solvent, the catalyst and the positive ion surface active agent.

ACMO™ (Acryloyl morpholine) is a monomer compatible with water and organic solvents whereas ACMOTM homopolymer is insoluble in water and organic solvents.

Methylhexahydrophthalic anhydride (MHHPA) is a thermo-setting epoxy resin curing agent mainly used in electric and electron field