Products in Base Chemicals & Intermediates: Aluminum Compounds

Boron Nitride NanoBarb™ Aluminum Master Alloy uses a proprietary process to incorporate and evenly disperse the Boron Nitride NanoBarbsTM into Aluminum to create the Master Alloy Composition.

Shandong Jiqing Chemical Magnesium Aluminate is non-toxic, odorless, non-irritating to breathing and skin. Low temperature synthetic material with good thermal stability, safe and easy to use, low expansion coefficient, good solubility, it is mainly used as flame retardant and smoke inhibitor in the plastic industry. It is an environmentally friendly product that replaces antimony trioxide and can be effective Improve the thermal stability and light stability of the product. Mainly used in special textiles, engineering plastics, various natural rubber and synthetic rubber, coatings, ceramic glazes, electronic product shells, chips, copper clad laminates and other plastic products. In ceramics, glass, frit and other industries, it can replace some valuable raw materials, such as zinc oxide, boric acid, borax, red lead, etc., and the application is cost-effective.

ALOLT 90DLS is a fine precipitated aluminum hydrate mainly used as a flame retardant and filler in different areas.

Southern Ionics Sodium Aluminate 38% Solution is a clear to hazy, yellow to amber solution.

Chem One Aluminum Sulfate Aluminum Sulfate is our proprietary Alum; Aluminum Trisulfate; Cake Alum ,Standard, Iron Free,Granular, Powder.

Southern Ionics Sodium Aluminate, 45% Solution is a clear to hazy, yellow to amber solution.

Pratham Stearchem Tri Basic lead Sulfate is a white colored powder. It is the aluminum salt of stearic acid. It is insoluble in water, alcohol and ether. However, it is soluble in glycol, alkali, BTX, chlorinated hyrdocarbons. It dissolves well in vegetable oils on heating and if high concentration is used, on cooling gelling is seen. Aluminum Stearate is used as an emulsifier in cosmetics. It is also used as lubricant in polyamides and in thermosetting of plastics. Its use as a water repellent agent and hydrophobic agent makes it useful to be used as a waterproofing agent in paint industry. Aluminum stearate is used as thickening agent in production of varnishes and lacquers. It also finds use as an anticaking agent in petroleum products.

M.M.P MMP3060 is used in ferro alloys/ foundry / chemical.

Valimet Aluminum Silicon Powder S-15 is made from the Eutectic Alloy 4047 (11-13% Si). This is well suited for corrosion and erosion-resistant coatings, catalytic reactions, and metal matrix composites. It corresponds to Pratt & Whitney, General Electric, Boeing, Rolls Royce, and other commercial specifications.

Valimet AM 6061 is specifically designed for additive manufacturing. This powder is sized to eliminate fines and enhance flowability after atomization via inert gas for spherical morphology. Its particle size distributions are tailored to maximize density, improve mechanical properties and optimize printing performance while meeting stringent OEM specifications.

Valimet Aluminum Silicon Powder S-2 is made from the Eutectic Alloy 4047 (11-13% Si). This is well suited for corrosion and erosion-resistant coatings, catalytic reactions, and metal matrix composites. It corresponds to Pratt & Whitney, General Electric, Boeing, Rolls Royce, and other commercial specifications.

AlB8 increase the purity and electrical conductivity of aluminum by reacting with chromium, titanium, vanadium and zirconium and making them precipitate as insoluble borides.

Aluminum Brazing is aluminum alloyed with silicon and other elements produced via atomization using either inert gas or air. Inert gas atomization results in spherical aluminum alloy powders and air atomization in irregular shape particles. A Typical grade would be AlSi12 with or without minor elemental additions.

ALOLT 120F is a fine precipitated aluminum hydrate mainly used as a flame retardant and filler in different areas.

Shandong Jiqing Chemical Zinc Aluminate is a high-efficiency smoke-suppressing flame retardant, an ideal substitute for zinc borate, and has passed EU regulations. In the polymer material, the dehydration temperature is high, non-toxic, tasteless, smoke-suppressing, flame-retardant, anti-drip, and does not affect its mechanical processing strength, elongation, heat aging performance, and a small amount of addition. Alternative: zinc borate, aluminum hydroxide, 100% magnesium hydroxide, 60% antimony trioxide and other inorganic flame retardants. It is an ideal smoke suppressant and flame retardant for rubber and plastic products. It is also a professional flame retardant and smoke suppressant for inorganic fireproof coatings.

M.M.P MMP1000 is used in ferro alloys/aluminothermic/ welding.

ALOLT 60DLS is a fine precipitated aluminum hydrate mainly used as a flame retardant and filler in different areas.

Valimet Aluminum Powder V-60 is produced by inert gas atomization and offers excellent packing density, low viscosity mixing and predictable flow rates. This attribute makes it ideal for a diverse range of end uses. It contains a minimum of 99.7% weight of Aluminum. It is equivalent to existing military and/or commercial specifications.

U.S. Metal Powders Aluminum Alloy Powders has a wide varieties which are 4000, 6000, 7000 series.

Valimet Aluminum Silicon Powder S-20 is made from the Eutectic Alloy 4047 (11-13% Si). This is well suited for corrosion and erosion-resistant coatings, catalytic reactions, and metal matrix composites. It corresponds to Pratt & Whitney, General Electric, Boeing, Rolls Royce, and other commercial specifications.

Valimet Spherical Aluminum Powder H-2 is produced by inert gas atomization and offers excellent packing density, low viscosity mixing and predictable flow rates. This attribute makes it ideal for a diverse range of end uses. It contains a minimum of 99.7% weight of Aluminum. It is equivalent to existing military and/or commercial specifications.

Anhydrous Aluminum Chloride is a key intermediate in the manufacture of a wide variety of specialty and commodity chemicals. Applications include the oxidation of titanium chloride, alkylation of olefinic esters and production of hydrocarbon additives. Finished products include titanium dioxide, synthetic detergents, pharmaceutical intermediates, styrene and ethyl benzene.

Refractory Minerals Roxal Alumina is a reclaimed Alumina which helps you lower your costs while benefiting the environment. It has some unique properties that make it ideal for use in phosphate bonded plastics, refractory brick and shapes. Roxal is a 325 mesh calcined alumina.

Valimet Aluminum Silicon Powder S-10 is made from the Eutectic Alloy 4047 (11-13% Si). This is well suited for corrosion and erosion-resistant coatings, catalytic reactions, and metal matrix composites. It corresponds to Pratt & Whitney, General Electric, Boeing, Rolls Royce, and other commercial specifications.

AlCa10 improve the as-cast surface quality of 5000 series alloys among other several applications.

Blue Grass Chemical ALUMINUM NITRATE SOLUTION is used in textiles (mordant), leather tanning, adhesives, catalysts in the petroleum industry, and the manufacture of incandescent filaments. The assay concentration and its related properties vary according to customers specification.

Valimet Aluminum Powder M-2 is produced by inert gas atomization and offers excellent packing density, low viscosity mixing and predictable flow rates. This attribute makes it ideal for a diverse range of end uses. It contains a minimum of 99.7% weight of Aluminum. It is equivalent to existing military and/or commercial specifications.

Atlantic Equipment Engineers Inc AL-504 is a white to pale - yellow, free-flowing ceramic powder. Aluminum Nitride is a strategic ceramic material which posesses a unique combination of high thermal conductivity and remarkable insulation properties. High thermal conductivity, high chemical purity, thermal shock resistance, corrosion / erosion resistance, sintering / hot pressing or thermal fillers.