Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Composite Materials
Core Materials
Products in Core Materials: Out of Autoclave Prepreg
19 Products found in Core Materials
Browse
Applications
Show All 3 Categories
Filters
Suppliers
Applications
Core Type
End Uses
Processing Methods
Physical Properties
Products
Brands
Suppliers
Formulations
Documents
Relevance
Evonik
ROHACELL® A
Core Type:
Polymethacrylimide (PMI) Foam
Functions:
Core Material
ROHACELL® A is a closed-cell rigid foam crafted from polymethacrylimide (PMI) chemistry. Notably, it is entirely devoid of CFCs, aligning with environmental considerations. Engineered with precision, ROHACELL® A foam is tailored to meet the rigorous standards of the aerospace industry. It offers versatility in aerospace applications, supporting both prepreg processing and vacuum infusion across various pressure and temperature ranges.
Evonik
ROHACELL® XT
Core Type:
Polymethacrylimide (PMI) Foam
Functions:
Core Material
ROHACELL® XT is a closed-cell rigid foam based on polymethacrylimide (PMI) chemistry that are free of CFCs and designed to meet the most extreme and demanding processing requirements. ROHACELL® XT foam is compatible with autoclave technologies, vacuum infusion, RTM, and VARTM processes.
Evonik
ROHACELL® SL
Core Type:
Polymethacrylimide (PMI) Foam
Functions:
Core Material
ROHACELL® SL foam cores exhibit exceptional mechanical strength, particularly under tensile loads, and high tenacity. These characteristics make it an excellent choice for applications subjected to significant dynamic mechanical loads. A ROHACELL® sandwich can provide the solution for achieving goals like excellent bending stiffness and strength, stabilizing thin FRP sheets against external forces, or creating complex 3-D geometries with minimal effort.
Evonik
ROHACELL® HERO
Core Type:
Polymethacrylimide (PMI) Foam
Functions:
Core Material
ROHACELL® HERO represents cutting-edge material technology, revolutionizing the production of lightweight and durable composite aircraft structures. These advanced sandwich cores, made from ROHACELL® HERO, offer unmatched weight-saving potential among all structural foams. They not only reduce the weight of aircraft but also enhance their durability over their operational lifespan. Additionally, they contribute to cost savings in the manufacturing process, making them a superior choice for modern aircraft construction.
Evonik
ROHACELL® S
Core Type:
Polymethacrylimide (PMI) Foam
Functions:
Core Material
ROHACELL® S is a closed-cell rigid foam created using polymethacrylimide (PMI) chemistry, and it is entirely free of CFCs. This foam is self-extinguishing, meaning it has fire-resistant properties. It is well-suited for various applications, including use in rail vehicles, watercraft, and the aerospace industry, where fire safety is a critical consideration.
Evonik
ROHACELL® WF
Core Type:
Polymethacrylimide (PMI) Foam
Functions:
Core Material
ROHACELL® WF is a core material with a coarse cell size that offers exceptional heat resistance and creep compression strength. It is characterized by its high temperature and compressive resistance, making it suitable for various applications, including aircraft, space, automotive, industrial, and radomes.
Toray
Toray MicroPly™ ES72A-2
Functions:
Core Material
Core Type:
Thermoset Foam
Chemical Family:
Epoxy & Epoxy Derivatives
Toray Toray MicroPly™ ES72A-2 is a 125°C (257°F) curing low-density, expanding, unsupported, epoxy syntactic core. ES72A-2 offers reduced processing, a one-shot cure, the ability to anchor inserts or fastenings, and increases the opportunity to consider lightweight, thin-walled composite sandwich structures. ES72A-2 can be easily contoured and shaped. Toray MicroPly™ ES72A-2 expands using a closed cell process ensuring complete homogeneous cell structure, the density/strength may be altered simply by changing cure pressure or limiting the volume available for expansion, the material is capable of expanding up to 650%. Toray MicroPly™ ES72A-2, formerly Amspand, is available in a variety of thicknesses down to 1 mm, and is supplied in sheets (625 mm x 400 mm).
Toray
Toray MicroPly™ SC72A
Functions:
Core Material
Core Type:
Thermoset Foam
Chemical Family:
Epoxy & Epoxy Derivatives
Toray Toray MicroPly™ SC72A is a 120°C (248°F) curing low-density unsupported epoxy syntactic core. Toray MicroPly™ SC72A offers reduced processing, a one-shot cure, the ability to anchor inserts or fastenings, and increases the opportunity to consider lightweight, thin-walled composite sandwich structures. Considerable cost reductions can be realized when SC72A replaces prepreg as the core material, and where sandwich cores below 3 mm are difficult to achieve in honeycomb core, Toray MicroPly™ is a superior alternative. Toray MicroPly™ SC72A is available in a variety of thicknesses down to 1 mm and is easily contoured and shaped. SC72A is supplied on a roll (15 m x 400 mm) or in sheets (625 mm x 400 mm). Toray MicroPly™ SC72A is compatible for co-cure with Toray E720 and E722 mid temperature curing prepregs.
Tubus Bauer GmbH
Tubus Bauer GmbH PEI 4,0-144C
Functions:
Core Material
Core Type:
Thermoplastic Honeycomb
Chemical Family:
Polyimides (PI)
Tubus Bauer GmbH PEI 4,0-144C is a tubus core made with Polyetherimide.
Toray
Toray MicroPly™ TCF4001
Functions:
Core Material
Core Type:
Thermoset Foam
Chemical Family:
Cyanate Esters
Toray Toray MicroPly™ TCF4001 cyanate ester syntactic foam is unique in the industry due to its combination of low density and good structural properties. The material does not require pressure during cure to achieve its mechanical properties, and can be machined to shape if required. Toray MicroPly™ TCF4001 can be packed into tooling cavities. 177°C (350°F) Cure, Cyanate Ester Syntactic Foam.
NMG Composites
NMG Composites FENIX60
Functions:
Core Material
Core Type:
Thermoplastic Foam
FENIX60 is is a new type of environmentally friendly flame retardant sandwich material with excellent environmental protection, flame retardancy, low smoke density and low smoke toxicity. It is suitable for trains, subways and other transportation manufacturing industries, aerospace, ships, and flame retardant performance requirements Higher field.
Toray
Toray MicroPly™ TCF4050
Functions:
Core Material
Core Type:
Thermoset Foam
Chemical Family:
Cyanate Esters
Toray Toray MicroPly™ TCF4050 core splice adhesive is a cyanate ester-based core splice with flatwise tensile strength up to 260°C (500°F). This product has been developed to be compatible with the high temperature Toray TC420 and Toray EX-1505 prepreg resin systems. 177°C (350°F) Cure, Cyanate Ester Core Splice Adhesive.
Tubus Bauer GmbH
Tubus Bauer GmbH PEI 4,0-120C
Functions:
Core Material
Core Type:
Thermoplastic Honeycomb
Chemical Family:
Polyimides (PI)
Tubus Bauer GmbH PEI 4,0-120C is a tubus core made with Polyetherimide.
Toray
Toray MicroPly™ TCF4045
Functions:
Core Material
Core Type:
Thermoset Foam
Chemical Family:
Epoxy & Epoxy Derivatives
Toray Toray MicroPly™ TCF4045 is a low dielectric, low density epoxy syntactic film. The material displays both good mechanical and dielectric properties. Toray MicroPly™ TCF4045’s base resin chemistry features low moisture absorption with good high temperature properties. 177°C (350°F) Cure, Low Dielectric Epoxy Syntactic Film.
Toray
Toray MicroPly™ SC8020A
Functions:
Core Material
Core Type:
Thermoset Foam
Chemical Family:
Epoxy & Epoxy Derivatives
Toray Toray MicroPly™ SC8020A is a low-density unsupported epoxy syntactic core. The material has been developed to offer a long out life and flexible cure schedules at 70°C to 130°C (158°F–266°F). Toray MicroPly™ SC8020A offers reduced processing, a one-shot cure, the ability to anchor inserts or fastenings, and increases the opportunity to consider lightweight, thin walled composite sandwich structures. Considerable cost reductions can be realized when SC8020A replaces prepreg as the core material, and where sandwich cores below 3 mm are difficult to achieve in honeycomb core, Toray MicroPly™ is a superior alternative. Toray MicroPly™ SC8020A is available in a variety of thicknesses down to 1 mm, is easily contoured and shaped. SC8020A is supplied on a roll (15 m x 400 mm) or in sheets (625 mm x 400 mm). Toray MicroPly™ SC8020A is compatible for co-cure with Toray’s E720, E722, and 8020 prepregs.
Toray
Toray MicroPly™ TCF4035
Functions:
Core Material
Core Type:
Thermoset Foam
Chemical Family:
Epoxy & Epoxy Derivatives
Toray Toray MicroPly™ TCF4035 is a syntactic film compatible with 121°C (250°F) epoxy prepregs. It features a 30-day out time and is offered in a density of approximately 0.6 g/cc (40 ± 4 pounds per cubic foot). It features a higher service temperature than Toray TCF4025. Syntactic Epoxy Film.
Tubus Bauer GmbH
Tubus Bauer GmbH PEI 4,0-64C
Functions:
Core Material
Core Type:
Thermoplastic Honeycomb
Chemical Family:
Polyimides (PI)
Tubus Bauer GmbH PEI 4,0-64C is a tubus core made with Polyetherimide.
Tubus Bauer GmbH
Tubus Bauer GmbH PEI 4,0-75C
Functions:
Core Material
Core Type:
Thermoplastic Honeycomb
Chemical Family:
Polyimides (PI)
Tubus Bauer GmbH PEI 4,0-75C is a tubus core made with Polyetherimide.
Tubus Bauer GmbH
Tubus Bauer GmbH PEI 4,0-48C
Functions:
Core Material
Core Type:
Thermoplastic Honeycomb
Chemical Family:
Polyimides (PI)
Tubus Bauer GmbH PEI 4,0-48C is a tubus core made with Polyetherimide.