Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Composite Materials
Polymers & Resins
Products in Polymers & Resins
1,478 Products found in Polymers & Resins
Browse
Applications
Show All 3 Categories
Filters
Suppliers
Applications
Polymer Name
End Uses
Processing Methods
Reinforcement Material
Products
Brands
Suppliers
Formulations
Documents
Relevance
Scott Bader
Crestapol® 1213A Urethane Acrylate Resin
Polymer Name:
Urethane Acrylate
Chemical Family:
Acrylics, Acrylates & Methacrylates, Urethanes
Processing Methods:
Resin Transfer Molding (RTM), Pultrusion, Closed Molding, Vacuum Infusion Processing (VIP)
Crestapol® 1213A Urethane Acrylate Resin is a thermosetting resin based on methacrylates that is amine pre-accelerated and heavily filled with 170 phr alumina trihydrate (ATH) fire retardant filler to achieve excellent low smoke and low toxicity fire performance. This resin is developed specially for both hand lamination and closed mold applications.
Scott Bader
Crestapol® 1250 Urethane Acrylate Resin
Polymer Name:
Urethane Acrylate
Chemical Family:
Acrylics, Acrylates & Methacrylates, Urethanes
Processing Methods:
Pultrusion, Closed Molding, Vacuum Infusion Processing (VIP)
Crestapol® 1250 Urethane Acrylate Resin is a low-viscosity urethane acrylate resin. It is designed for maximum wet out for pultruding fiberglass, carbon fiber, and other fibers. This product efficiently produces fast-curing, very tough, high-strength composites with superior water and hydrolysis resistance. Run times and formulation will depend on the geometry and complexity of the die. It will run very fast, making for very efficient pultruded parts.
Scott Bader
Crestamould® B21 Sealer
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters
End Uses:
Foams
Crestamould® B21 Sealer is a brushable sealing laminating resin for polystyrene foam surfaces. When used with a chopped-strand mat, this sealer provides a styrene-resistant barrier between the polystyrene plug and styrenated tooling pastes. It has good adhesion to tooling pastes like Crestamould® T29. Crestamould® B21 sealer has a low styrene content, significantly reducing polystyrene surface erosion compared to traditional styrene-containing resins. The sealer can be used to laminate CSM to create a more structurally stable foundation for mold production.
Scott Bader
Crystic® Polyester Resin 2.420PA
Polymer Name:
Thermoset Polyester
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Chemical Family:
Polyesters, Orthophthalics
Color:
Green
Processing Methods:
Spray Lay-up
Crystic® Polyester Resin 2.420PA is a long gel time, low styrene emission, pre-accelerated orthophthalic polyester resin. This laminating resin has a 45-minute gel time and low exotherm, making it suitable for the molding of large structures and thick laminates. Crystic® Polyester Resin 2.402PALV is the low-viscosity version of this product. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications.
Scott Bader
Crystic® Transfer Moulding Resin 1141PA
Polymer Name:
Thermoset Polyester
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Chemical Family:
Polyesters, Orthophthalics
Color:
Grey
Processing Methods:
Resin Transfer Molding (RTM)
Crystic® Transfer Moulding Resin 1141PA is based on Crystic® 1141, a tough, durable orthophthalic unsaturated polyester resin. It is designed for use in resin transfer molding (RTM) and may be used in other resin injection or vacuum-assisted techniques. This product has a longer process time than Crystic® 1142PA.
Scott Bader
Crystic® Polyester Resin 195
Polymer Name:
Thermoset Polyester
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Chemical Family:
Polyesters, Acrylics, Acrylates & Methacrylates
Color:
White
Crystic® Polyester Resin 195 is a light-stabilized polyester resin containing styrene and methyl methacrylate. When combined with powder-bonded "E" glass, it is recommended for the production of maximum-clarity GRP sheeting with up to 80% light transmission. This product has a 25-minute gel time.
Scott Bader
Crystic® CiPP Resin D5101
Polymer Name:
Polyester (unspecified)
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Chemical Family:
Polyesters
Crystic® CiPP Resin D5101 is an unaccelerated, thixotropic, isophthalic polyester resin ideally suited for use in the production of liners for pipe relining. Thanks to Cured-In-Place-Pipe (CiPP) technology, this resin can be used to create a new pipe lining within an existing pipe structure, making it efficient and easy to use. Once fully cured, the laminates have good chemical resistance and mechanical properties, as well as long-term property retention. This resin is therefore ideal for heavy duty, high frequency, and industrial applications. This resin should be allowed to reach workshop temperature before use, at which point its gel time will be between 3 and 6 minutes. It requires the addition of a catalyst for the curing process to begin. However, further additives such as pigments and fillers may affect its natural properties, and their effects should be evaluated before use.
Scott Bader
Crestafire® Bio P1-8001
Processing Methods:
Spray Lay-up, Hand Lay-up
Crestafire® Bio P1-8001 is a versatile bio-resin with excellent fire, smoke, and toxicity properties and good mechanical properties, due to which the product can be used in the most demanding FST applications in the railway, building and construction, and other public transport industries. It is designed for applications where fireproof performance and natural origins are key to the final product.
Scott Bader
Crestamould® VE 679PA
Polymer Name:
Vinyl Ester Resin
Chemical Family:
Vinyl Esters
Crestamould® VE 679PA is a pre-accelerated, thixotropic, DCPD-modified vinyl ester resin. This product has been developed for use as a skin coat in marine and tooling applications. It has excellent blister resistance, reduced print through, a 23-minute gel time, and Lloyd's approval.
Scott Bader
Crystic® Thixotropic Resin LS 451PA
Polymer Name:
Polyester (unspecified)
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Chemical Family:
Polyesters
Color:
Blue
Processing Methods:
Spray Lay-up, Hand Lay-up
Crystic® Thixotropic Resin LS 451PA is a pre-accelerated thixotropic resin. It is suitable for brush or spray application in the marine industry or general molding market. This product has reduced styrene emissions, typically 20 - 30% lower than conventional lower styrene resins. It has Lloyd's approval but is also suitable for use in building and construction, transportation, and industrial applications. This product has a 20-minute gel time.
Scott Bader
Crystic® Vinyl Ester Resin VE671-03
Polymer Name:
Vinyl Ester Resin
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Chemical Family:
Bisphenol A Type Epoxy, Vinyl Esters
Processing Methods:
Centrifugal Casting
Crystic® Vinyl Ester Resin VE671-03 is a bisphenol A epoxy based, vinyl ester resin. It designed for use in closed mold applications and centrifugal casting processes. It is recommended for the manufacture of fiber reinforced composite tanks, vessels, ducts etc. for use in chemical processing applications.
Ecomass Technologies
Ecomass® Compound 3602BI54 Nat
Polymer Name:
Medium Density Polyethylene (MDPE)
Fillers Included:
Barium Sulfate
Density:
1640.0 - 1640.0 kg/m³
Processing Methods:
Compression Molding, Extrusion, Injection Molding
Ecomass® Compound 3602BI54 Nat is a filled polyethylene (MDPE) compound that is used in various applications. The compound is processed through extrusion, making it suitable for manufacturing purposes. It is available in the form of pellets, allowing for easy handling and integration into different production processes.
Ecomass Technologies
Ecomass® Compound 4703ZC76
Density:
3400.0 - 3400.0 kg/m³
Ecomass® compound 4703ZC76 is a stainless steel-filled thermoplastic polyurethane compound that is recommended to be used in weighting, balancing and vibration dampening applications. This injection molding grade is known for its good toughness and flexibility. Additionally, it functions as a nontoxic thermoplastic lead substitute.
Ecomass Technologies
Ecomass® Compound 705ZD70
Polymer Name:
Acrylonitrile Butadiene Styrene (ABS)
Fillers Included:
Tungsten
Density:
3000.0 - 3000.0 kg/m³
Processing Methods:
Extrusion, Injection Molding
Ecomass® compound 705ZD70 is a tungsten-filled acrylonitrile butadiene styrene compound that is recommended to be used in weighting, balancing and radiation shielding applications. This extrusion grade is known for its high specific gravity, good toughness and rigidity. Additionally, it functions as a nontoxic thermoplastic lead substitute.
Ecomass Technologies
Ecomass® Compound 1850ZD88
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Tungsten
Density:
6500.0 - 6500.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 1850ZD88 is a high-specific-gravity, tungsten powder-filled polyamide (PA6) compound. The processing method for this compound is injection molding. Ecomass® Compound 1850ZD88 is a nontoxic alternative to lead (Pb) and is used for weighting and balancing applications. The product form is pellets.
Ecomass Technologies
Ecomass® Compound 1007ZC85
Density:
3800.0 - 3800.0 kg/m³
Ecomass® compound 1007ZC85 is a stainless steel-filled polyether block amide compound, commonly used in applications that require weighting, balancing, and radiation shielding. This injection molding grade is known for its high specific gravity, superior toughness, and flexibility. Additionally, it is a nontoxic lead-substitute thermoplastic.
Ecomass Technologies
Ecomass® Compound 1002CO90
Density:
5100.0 - 5100.0 kg/m³
Ecomass® Compound 1002CO90 is a high-specific-gravity, copper powder-filled polyether block amide (PEBA) compound. The processing method for this compound is injection molding/extrusion. Ecomass® Compound 1002CO90 is a nontoxic alternative to lead (Pb) and is used for weighting and balancing applications.
Ecomass Technologies
Ecomass® Compound 1850ZN76T1 Bk-1
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Steel Powder
Density:
3000.0 - 3000.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 1850ZN76T1 Bk-1 is a steel powder-filled polyamide 6 (PA6) compound that is impact-modified. The processing method for this compound is injection molding. It is a nontoxic compound used for weighting and balancing applications. The product form is pellets.
Ecomass Technologies
Ecomass® Compound 1850CO90T1
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Copper
Density:
5000.0 - 5000.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 1850CO90T1 is a copper powder-filled polyamide (PA6) compound that is impact-modified and exhibits good toughness. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) and is used for weighting and balancing applications.
Ecomass Technologies
Ecomass® Compound 1002ZD96
Polymer Name:
Polyether Block Amide (PEBA)
Fillers Included:
Tungsten
Density:
10000.0 - 10000.0 kg/m³
Processing Methods:
Extrusion, Injection Molding
Ecomass® compound 1002ZD96 is a tungsten powder-filled polyether block amide compound that is recommended to be used in applications requiring weighting, balancing, and radiation shielding. This extrusion grade is known for its high specific gravity, superior toughness, and flexibility. Additionally, it is a nontoxic lead-substitute thermoplastic.
Ecomass Technologies
Ecomass® Compound 1850IO80T2
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Iron
Density:
3000.0 - 3000.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 1850IO80T2 is an iron powder-filled polyamide (PA6) compound that is impact-modified and exhibits good toughness. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) and is used for weighting and balancing applications.
Ecomass Technologies
Ecomass® Compound 1080BI64
Polymer Name:
Polyamide (unspecified)
Fillers Included:
Barium Sulfate
Density:
2000.0 - 2000.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® compound 1080BI64 is a barium sulfate-filled polyamide alloy that is recommended to be used in weighting, balancing and radiation shielding applications. This injection molding grade is known for its excellent toughness, and rigidity. Additionally, it is a nontoxic lead substitute thermoplastic.
Ecomass Technologies
Ecomass® Compound 4703ZD95
Density:
10000.0 - 10000.0 kg/m³
Ecomass® compound 4703ZD95 is a tungsten-filled thermoplastic polyurethane compound that is recommended to be used in weighting, balancing, radiation shielding and vibration dampening applications. This injection molding grade is known for its good toughness. Additionally, it functions as a nontoxic thermoplastic lead substitute.
LRBG Chemicals
LRBG Chemicals USA MUF 400-15
Polymer Name:
Melamine Urea Formaldehyde
Chemical Family:
Melamine Urea Formaldehyde
Compatible Substrates & Surfaces:
Wood
LRBG Chemicals USA MUF 400-15 is a melamine urea formaldehyde resin spray-dried powder, appearing as a tan to white free-flowing powder. It forms a crust on the surface by absorbing moisture from the air. This powdered resin can be used in container wood flooring adhesive, wood adhesive, and compression molding of wood articles.
Ecomass Technologies
Ecomass® Compound 2150ZN84T1
Polymer Name:
Polyamide 66 (PA 66)
Fillers Included:
Iron
Density:
4000.0 - 4000.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 2150ZN84T1 is an iron powder-filled polyamide (PA66) compound that is impact-modified and exhibits good toughness. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) used for weighting and balancing applications.
Ecomass Technologies
Ecomass® Compound 4703ZD84
Density:
5600.0 - 5600.0 kg/m³
Ecomass® compound 4703ZD84 is a tungsten-filled thermoplastic polyurethane compound that is recommended to be used in weighting, balancing, radiation shielding and vibration dampening applications. This injection molding grade is known for its excellent toughness and flexibility. Additionally, it functions as a nontoxic thermoplastic lead substitute.
LRBG Chemicals
LRBG Chemicals USA MF 415
Polymer Name:
Melamine Formaldehyde (MF)
Processing Methods:
Compression Molding
End Uses:
Furniture
LRBG Chemicals USA MF 415 is primarily designed for paper lamination but can also be used to impregnate cloth, synthetic, or glass fibers. It serves as a water-resistant thermosetting binder and in compression wood flour molding to make school furniture. Additionally, this resin has been used successfully as a plaster modifier to increase strength and environmental resistance.
Ecomass Technologies
Ecomass® Compound 720ZC85
Polymer Name:
Acrylonitrile Butadiene Styrene (ABS)
Fillers Included:
Stainless Steel Powder
Density:
4000.0 - 4000.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® compound 720ZC85 is a stainless steel-filled acrylonitrile butadiene styrene compound that is recommended to be used in weighting, balancing and radiation shielding applications. This injection molding grade is known for its good toughness, pleatability and rigidity. Additionally, it functions as a nontoxic thermoplastic lead substitute.
Ecomass Technologies
Ecomass® Compound 2150TU85
Polymer Name:
Polyamide 66 (PA 66)
Fillers Included:
Tungsten
Density:
5600.0 - 5600.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® compound 2150TU85 is a tungsten powder-filled polyamide compound that is recommended to be used in weighting, balancing and radiation shielding applications. This injection molding grade is known for its good toughness, and rigidity. Additionally, it is a nontoxic thermoplastic that can substitute lead.
Ecomass Technologies
Ecomass® Compound 1080ZB92
Polymer Name:
Polyamide (unspecified)
Fillers Included:
Metal
Density:
6900.0 - 6900.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® compound 1080ZB92 is a filled polyamide alloy that is recommended to be used in radiation shielding applications. This injection molding grade material is known for its excellent toughness and rigidity. Additionally, it functions as a nontoxic thermoplastic that can substitute lead.
Ecomass Technologies
Ecomass® Compound 4703ZD88
Density:
6800.0 - 6800.0 kg/m³
Ecomass® compound 4703ZD88 is a tungsten-filled thermoplastic polyurethane compound that is recommended to be used in weighting, balancing, radiation shielding and vibration dampening applications. This injection molding grade is known for its excellent toughness and flexibility. Additionally, it functions as a nontoxic thermoplastic lead substitute.
Ecomass Technologies
Ecomass® Compound 1066ZD96
Polymer Name:
Polyamide (unspecified)
Fillers Included:
Tungsten
Density:
10000.0 - 10000.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® compound 1066ZD96 is a tungsten powder-filled polyamide alloy that is recommended to be used in weighting, balancing and radiation shielding applications. This injection molding grade is known for its high specific gravity, superior toughness, and rigidity. Additionally, it is a nontoxic lead-substitute thermoplastic.
Ecomass Technologies
Ecomass® Compound 3330TU96 Nat
Polymer Name:
Polyetheretherketone (PEEK)
Fillers Included:
Tungsten
Density:
11000.0 - 11000.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 3330TU96 Nat is a high specific gravity, tungsten powder-filled polyetheretherketone (PEEK) compound that is rigid. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) used for weighting, balancing, and radiation shielding applications.
Ecomass Technologies
Ecomass® Compound 1850ZC68 Bk-1
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Stainless Steel Powder
Density:
2700.0 - 2700.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 1850ZC68 Bk-1 is a stainless steel powder-filled polyamide (PA6) compound that exhibits very good toughness. The processing method for this compound is injection molding. It is a nontoxic alternative used for weighting and balancing applications. The product form is pellets.
LRBG Chemicals
LRBG Chemicals USA MUF 400-6
Polymer Name:
Melamine Urea Formaldehyde
Chemical Family:
Melamine Urea Formaldehyde
Compatible Substrates & Surfaces:
Wood
LRBG Chemicals USA MUF 400-6 is a melamine -urea formaldehyde resin spray-dried powder. It appears as a tan to white, free-flowing powder that forms a crust on the surface when exposed to moisture in the air. This powdered resin can be used in container wood flooring adhesives, wood adhesives, and for the compression molding of wood articles.
Ecomass Technologies
Ecomass® Compound 1050TU96
Polymer Name:
Polyamide (unspecified)
Fillers Included:
Tungsten
Density:
11000.0 - 11000.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® compound 1050TU96 is a tungsten powder-filled polyamide alloy that is recommended to be used in weighting, balancing and radiation shielding applications. This injection molding grade is known for its high specific gravity, superior toughness, and rigidity. Additionally, it is a nontoxic thermoplastic that substitutes for lead.
Show
36
of 1,478 results
Go to page
1
2
3
4
5
6
7
8
9
10