Brands in Elastomers

DeMUL is a clear, colorless liquid that serves as an emulsifier for emulsifiable concentrates, microemulsions, concentrated emulsions, and oil dispersions. It has a saponification number of approximately 128, an acid number of maximum 1, and an iodine number of approximately 60 gI/100g.

SILFAR® is the name of WACKER’s range of silicone-based products specifically intended for the pharmaceutical and food industries, as well as for use in fermentation and other biotech processes. SILFAR® products feature outstanding chemical resistance. They are not resorbed in the digestive tract, and are therefore not metabolized. They are colorless and odorless.

Hydrogenated AcryloNitrile Butadiene Rubber (HNBR) properties depend upon the acrylonitrile content and the degree of hydrogenation of the copolymer. They have somewhat better oil and chemical resistance than nitrile rubber and can withstand much higher temperatures.

Arnitel TPC, a thermoplastic polyester elastomer, is used as a lighter, smarter, greener material alternative to conventional rubbers. Because of its excellent characteristics, it offers design engineers exceptional flexibility—giving them the freedom to implement the most innovative product concepts.  Arnitel has a broad range of hardnesses, making it capable to replace rubbers, metals, leather and other thermoplastics. This thermoplastic elastomer delivers superior chemical resistance, along with heat and wear resistance, plus the ability to be recycled.

Alpha Engineered Composites FluoroSeal fluoroelastomer sheet packing is especially recommended for fabrication into gaskets, seals, packings, washers, pads, shims, curtains, joints and other parts for use where severe operating conditions prevail

Acti-Min® is a clean, high quality, white-ring kaolin especially selected for the ceramic and refractories industries.

Finely Milled, Powdered Biogenic Aragonite Calcium Carbonate (CaCO3)

High-purity silicone adhesives offer efficiencies in manufacturing by maximizing throughput. From biocompatible adhesives to high-temperature space-grade adhesives, NuSil® high-performance silicones from Avantor® are formulated to provide the strongest bond for a wide range of substrates in the most demanding environments.

NITRILATEX is an extensive line of latex with different compositions specifically developed for application in the cord impregnation, rug and carpet backings, and the manufacturing of synthetic and natural fiber agglomerates, supported and unsupported gloves, non-fabric coatings, among others.

Cellular Vulkollan® is characterized by excellent properties such as high resilience, large volume compressibility, high restoring force, good abrasion resistance even under continuous load, aging and weather resistance, resistance to oil, grease, petrol, ozone, nitrogen.

SYNTHETIC RUBBER MCSM® is a modified chlorosulfonated polyethylene rubber, its airtightness is equivalent to halogenated butyl rubber, oil resistance is better than nitrile rubber, and has excellent aging resistance and high temperature resistance, and various types of rubber Olefin rubber has excellent compatibility. Mainly used for tire sealing layer and rubber products such as oil resistance, high temperature resistance and weather resistance. When used in tire sealing layer, it can be substituted for bromobutyl rubber. Due to its slow curing speed, it is generally recommended to replace 5-10 parts. The combined use of modified chlorosulfonated polyethylene rubber can significantly improve the processing performance of the rubber material and increase the air tightness of the rubber material.

St. Louis Group offers a wide range of highly effective liquid & powder phosphorus based flame retardants. Specialty dispersions, blends, and masterbatches are available upon request.

Silfermin FLS series are produced from naturally occurring sodium potassium - aluminum silicate feedstock. With a unique and distinctive combination of particle morphology, surface chemistry, and reflective index, Silfermin FLS exhibits excellent anti-blocking performance with minimal impact upon barefoot optical properties. These provide better clarity & low haze with high gloss.

Santicizer® Plasticizers offer all the benefits of high solvating plasticizers including compatibility in multiple polymer systems such as Polysulfide, PVC and Polyurethane. Because of their high efficiency, less energy is required to fuse PVC formulations. These materials are well suited for plastisol applications, but can easily be used in almost any polymer system that requires additional flexibility and softness.

K-KAT® catalysts are alternatives (or substitutes) to tin and mercury catalysts for isocyanate, blocked isocyanate and moisture cure silane systems. K-KAT catalysts are effective for crosslinking silane terminated polymers while adding improved adhesion.

PharMed® BPT tubing has been formulated to withstand the rigors of peristaltic pumping action while providing the biocompatible fluid surface required in sensitive bioprocess applications. With its superior flex life characteristics, PharMed BPT tubing simplifies biopharmaceutical manufacturing processes by reducing production downtime due to pump tubing failure. The excellent wear properties of PharMed BPT tubing also can lead to reduced erosion of the tubing interior walls, improving the overall efficiency of filtering systems.