Products in Battery & Electronic Materials

Copper Iodide is manufactured through a meticulous process to eliminate impurities that are known to cause discolouration. Our Copper Iodide is used as a reagent in organic synthesis, and can be used as a heat stabilizer for Nylon in technical and engineering applications. It is used as a raw material for p-type semiconductors and solar cells and also utilized in additives for upstream in the Oil and Gas industry.

The StanoStat CP range of antimony tin oxides (ATO) combine semi-conductive properties with a very light gray colouration. Compared to other ATO grades, where the blue shade is dominant, the StanoStat CP grades offer great variation in the coloring of the finished product.

3YSZ Zirconium Oxide Yttria Stabilized Nanoparticles 50nm to 80nm (NP-40082-A) is a high purity white powder. It appears oblique crystal at low temperature and shows tetragonal crystal formation at high temperature. Nano ZrO2 is soluble in sulfuric acid, and hydrofluoric acid and has good thermal-chemical stability. When at a high temperature, it has electrical conductivity, good strength, and toughness. Nano ZrO2 also possesses good mechanical, thermal, electrical and optical properties.

NANOMYTE® BE-60E (LFP) is a Lithium Iron Phosphate (LFP) electrode sheet

NANOMYTE® SE-50 is a hybrid polymer composite solid electrolyte for use in solid state lithium batteries. The two key challenges for achieving high performance solid state batteries are the low ionic conductivity of many solid electrolytes and the large impedance posed by the electrode-electrolyte interface. SE-50 addresses these challenges by having a high Li+ ionic conductivity, combined with low interfacial resistance between the electrodes and solid electrolyte. These properties are enabled by the unique elastomeric self-adhesive properties of the solid electrolyte. In addition, NANOMYTE® SE-50 has excellent electrochemical stability, which allows its use with high voltage cathode materials.

NANOMYTE® BE-20E (LCO) is a Lithium Cobalt Oxide (LCO) electrode sheet

Lutetium Aluminum Garnet (LuAG) LED Phosphor is effectively excited by a 450nm blue LED chip with an emission peak wavelength in the 510-540nm range. Combined with nitride red phosphor, a high CRI spectrum with Ra above 95 can be achieved.

NANOMYTE® BE-54E (NMC622) is a Lithium Nickel Manganese Cobalt Oxide (NMC622) electrode sheets

NANOMYTE® BE-35 (LMO) is a Lithium Manganese Oxide (LMO) powder

Daikin Industries, Ltd. PFC-C318 (C4F8) is a high-purity gas tailored for semiconductor manufacturing. With a purity level of 99.99 vol% (4N) or greater, it excels at etching SiO₂ and low-k films. Additionally, it's apt for the Bosch process, particularly in side wall protection, serving the electrical and electronics industry for parts and component fabrication.

3YSZ Zirconium Oxide Yttria Stabilized Nanoparticles 50nm to 80nm (NP-40082-E) is a high purity white powder. It appears oblique crystal at low temperature and shows tetragonal crystal formation at high temperature. Nano ZrO2 is soluble in sulfuric acid, and hydrofluoric acid and has good thermal-chemical stability. When at a high temperature, it has electrical conductivity, good strength, and toughness. Nano ZrO2 also possesses good mechanical, thermal, electrical and optical properties.

PEO-based Polymer Solid Electrolyte

Yttrium Aluminum Garnet (YAG) LED Phosphor is efficient and suitable for creating high correlated color temperature (CCT). YAG phosphor is very stable due to its unique crystal structure and its synthetic route is very straightforward. It can be effectively excited by a 450nm blue LED chip with an emission peak wavelength in the 530-560nm range. YAG phosphor exhibits yellow-light emission from the characteristic 5d and 4f energy levels. The energy levels of the 5d1 excited states and the emission photon energy of Ce3+ ion strongly depend on the host crystals via the crystal-field-induced energy level splitting of the 5d1 orbital. Combined with a blue InGaN LED, YAG phosphor has been successfully used in WLED.

NANOMYTE® BE-56E (NMC811) is a Lithium Nickel Manganese Cobalt Oxide (NMC811) electrode sheets

Nitride red LED Phosphors are alkaline metal silicon-nitride activated by rare-earth ions luminescent materials with strong M-N binding force. Nitride LED phosphor is crucial for high CRI and low correlated color temperature (CCT) white LEDs. When combined with blue LED chip and aluminosilicate green phosphor, it can produce a white LED light with Ra 95 or above. With violet LED chip, phosphate blue phosphor and β-SiAlON green phosphor, a full spectrum of white light with R1-R15 all above 95 can be achieved.

NANOMYTE® BE-52E (NMC532) is a Lithium Nickel Manganese Cobalt Oxide (NMC532) electrode sheets

3YSZ Zirconium Oxide Yttria Stabilized Nanoparticles 50nm to 80nm (NP-40082-B) is a high purity white powder. It appears oblique crystal at low temperature and shows tetragonal crystal formation at high temperature. Nano ZrO2 is soluble in sulfuric acid, and hydrofluoric acid and has good thermal-chemical stability. When at a high temperature, it has electrical conductivity, good strength, and toughness. Nano ZrO2 also possesses good mechanical, thermal, electrical and optical properties.

The StanoStat CP range of antimony tin oxides (ATO) combine semi-conductive properties with a very light gray colouration. Compared to other ATO grades, where the blue shade is dominant, the StanoStat CP grades offer great variation in the coloring of the finished product.

Potassium Perchlorate is a white powder with the chemical formula KClO₄.

Aether Industries Limited Fluoroethylene Carbonate stands out as a specialized liquid, presenting itself with a distinctive color profile ranging from clear to slightly pale yellow. Tailored for applications in electrolytes, this product takes center stage in the realm of batteries, contributing to the efficiency and performance of such energy storage systems.

Ammonium Perchlorate is a white powder with the chemical formula NH₄ClO₄.

NANOMYTE® SE-50A is a Polymer Ceramic composite electrolyte (30% in Acetonitrile)

NANOMYTE® BE-45 (NCA) is a Lithium Nickel Cobalt Aluminum Oxide (NCA) powder

Lithium Aluminum Titanium Phosphate (Li1.4Al0.4Ti1.6(PO4)3)

NANOMYTE® BE-70E (Sublimed Sulfur) is a Sublimed Sulfur electrode sheet

Ta-doped Lithium Lanthanum Zirconate ( Li6.4La3Zr1.4Ta0.6O12)

Neoflon VT-475 is a solid powder known for its odor-free properties, making it an ideal choice for the electrical and electronics market, specifically in lithium-ion batteries. This industrial additive offers chemical resistance and improved flexibility, ensuring it meets the stringent requirements of electrical components and battery applications.

NANOMYTE® BE-10CE (LTO) is a Carbon-coated Lithium Titanate (LTO) electrode sheet

NANOMYTE® BE-10C is a Carbon-coated Lithium Titanate (LTO) powder

Potassium Nitrate is in the form of white crystals or prills and has chemical formula KNO₃.

Nickel Oxide, Black is an inorganic compound, produced by controlled oxidation of high purity carbonyl nickel powder.

Lithium Phosphorus Sulfur Chloride Iodide (Li6PS5Cl0.9I0.1)