Products in 3D Printing Polymers: Polyetheretherketone (PEEK)

INFINAM® PEEK 9359 F is a filament created by extruding natural-colored VESTAKEEP® polyether ether ketone (PEEK) resin. This semi-crystalline polymer boasts exceptional thermal and chemical resistance. This material finds application in various industries, including aerospace and automotive. When used with fused deposition modeling (FDM) technology, it offers advantages such as reduced material consumption, improved mechanical properties of printed parts, and greater design flexibility for our customers.

Nexa3D xPEEK147 is a high temperature resistant resin with HDT 230°C for tooling and molding applications. The material showcases good dimensional stability, good surface finish and sufficient toughness to withstand mechanical stresses from molding processes. This material is resistant to temperature stress and is ideal for tooling applications.

PolyBarb Filament PEEK is a series of high quality and easy to print PolyEther Ether Ketone filaments with printed mechanical properties surpassing chopped carbon fiber filled PEEK, allowing for significantly stronger parts.

Polyether Ether Ketone (PEEK) PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. PEEK is regarded as one of the highest performing engineering thermoplastics in the world. PEEK is used to fabricate items used in demanding applications in aerospace, automotive, oil and gas and medical industries.

Luvocom® 3F PEEK CF 9676 BK Filament is a 15% carbon reinforced PEEK (Polyether Ether Ketone) with extraordinary characteristics in terms of mechanical, thermal and chemical resistance. PEEK with carbon is used in demanding industries like oil and gas, automotive, mechanical engineering, aircraft and aerospace technologies. This particular high performance polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts.

Polyether Ether Ketone (PEEK) PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. PEEK is regarded as one of the highest performing engineering thermoplastics in the world. PEEK is used to fabricate items used in demanding applications in aerospace, automotive, oil and gas and medical industries.

Essentium PEEK is the highest performance material in our broad material portfolio. In addition to best-in-class printability, it has excellent thermal and chemical resistance. Essentium PEEK boasts outstanding strength, stiffness, and impact properties and is inherently flame resistant.

Z-PEEK is one of the strongest polymers on the planet. It has strength-to-weight ratio comparable to stainless steel and exceptional thermal properties. The material can withstand thermal-cycling in vacuum chambers used for space-qualification tests, radiation, or wear in over 22 million cycles in PEEK-steel gear pairs working at 1600 rpm.

FIL-A-GEHR® PEEK MG (MEDI) is a high performance filament based on the material PEEK and is suitable for medical and pharmaceutical applications in direct body contact with tissue, bone, skin and mucous membrane up to 24 hours. They have been tested and evaluated by independent, accredited test laboratories and meet the following biocompatibility requirements: – ISO 10993-1/5/12/18 and USP Class VI.

FIL-A-GEHR® PEEK is a Polyetheretherketone ranks among the high Performance thermoplastics thanks to its high melting point of 343 °C and its maximum continuous operating temperature of 260 °C. Its particular chemical structure makes PEEK largely stable against thermal and chemical damage and permits its usage inside the body. In case of fire, the smoke development of PEEK is the lowest of all thermoplastics; the material is therefore used in aviation. FIL-A-GEHR PEEK® is an experimental filament with a processing temperature of 375 °C in the heated chamber (180 °C). The material is specifically apt for use on 3D printers.

Fabru PEEK CF10 is a Polyethylene.