Luvocom 3F PEEK 9581 Filament - Elogio AM

Identification & Functionality

Features & Benefits

Materials Features: Chemical Resistant,
Good Adhesion,
Good Mechanical Properties,
Good Printability,
High Durability,
High Impact Resistance,
High Strength,
Semi Crystalline
Product Background: The 3D4MAKERS PEEK Filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the 3D4MAKERS PEEK Filament particularly suitable for usage in FDM and FFF 3D printers. The material has an excellent adhesion between layers, which results in great improvement of the impact resistance, strength, durability, and the printing process.

Applications & Uses

Markets: Automotive & Transportation,
Building & Construction,
Electrical & Electronics,
Healthcare & Pharma,
Industrial
Applications: Automotive & Transportation — Automotive
Exterior & Body,
Interior,
Other Automotive Applications
Building & Construction — Building Materials
Structural Components
Industrial — Chemical & Industrial Manufacturing
Equipment & Parts,
Other Industrial Applications
Healthcare & Pharma — Medical
Implants & Prosthetics
Electrical & Electronics — Parts & Components
Other Parts & Components
Automotive & Transportation — Transportation
Aerospace & Aviation
Plastics & Elastomers End Uses: Aerospace Applications,
Aircraft Applications,
Automotive Applications,
Automotive Exterior Parts,
Automotive Interior Parts,
Body Implants,
Machine/Mechanical Parts,
Prosthetics,
Pump Parts
Plastics & Elastomers Processing Methods: Fused Filament Fabrication

Properties

	Value	Units	Test Method / Conditions
Charpy Impact Strength (Notched) (23ºC/50%Rh)	7	—	ISO 179 1eA
Flexural Elongion (23ºC/50%Rh)	7	%	ISO 178
Flexural Modulus (23ºC/50%Rh)	3.4	GPa	ISO 178
Flexural Strength (23ºC/50%Rh)	145	MPa	ISO 178
Tensile Elongation (23ºC/50%Rh)	5	%	ISO 527
Tensile Modulus (23ºC/50%Rh)	3.8	GPa	ISO 527
Tensile Strength (23ºC/50%Rh)	97	MPa	ISO 527

	Value	Units	Test Method / Conditions
Flammability Behaviour	(V-0)	—	UL
Linear Mould Shrinkage (Vsr 3mm)	1.4-1.6	—	DIN16901
Melt Volume Rate (MVR 380ºC/10 Kg)	22	cm³/10 min	ISO1183
Specific Gravity	1.31	g/cm³	ISO 1183
Water Absorption (23ºC/24H)	min. 0.1	—	—

	Value	Units	Test Method / Conditions
Continuous Service Temperature	250	ºC	UL 746B
Heat Distortion Temperature	145	°C	ISO 75
Maximum (Short Term) Use Temperature	260	°C	—

Regulatory & Compliance

Certifications & Compliance: Regulation (EU) No. 1272/2008,
Regulation (EU) No. 67/548/EEC

Technical Details & Test Data

Print Recommendation: Nozzle temperature 360-420 ºC

Bed Temperature 120 ºC

Print Speed 15-30 mm/s

Bed Adhesion 4 hours, 110°C

Drying Instruction PEI Sheet

Luvocom® 3F PEEK 9581 Filament