Products in Masterbatches: Polypropylenes (PP)

GENIOPLAST® PP50S12 MG is a pelletized masterbatch formulation. It contains 50% of a non-reactive, ultra-high molecular weight silicone gum dispersed in polypropylene homopolymer. This formulation is specifically developed as an additive to enhance scratch resistance in polypropylene-based compounds for automotive interior applications.

GENIOPLAST® PP50S12 is a pelletized masterbatch formulation comprising 50% of a non-reactive, ultra-high molecular weight silicone gum dispersed in polypropylene homopolymer. It is specially designed as an additive to enhance scratch resistance in polypropylene-based compounds used in automotive interior applications.

GENIOPLAST® PP 20A08 is a pelletized formulation consisting of 20% functional silicone dispersed in polypropylene. It has been specifically developed as a compounding additive for unfilled and filled thermoplastic polyolefin compounds. This product is odorless. When used within the recommended levels (0.5 - 2%), GENIOPLAST® PP 20A08 does not have a negative impact on the thermo-mechanical properties of the compounds it is added to. Additionally, due to its specific effect, the processing temperature of the polyolefin compound can be slightly lowered.

Flytac 192 is a water-white thermoplastic resin obtained from the polymerization of aromatic and hydrogenation. It is widely applied in hot melt adhesive (HMA), and pressure sensitive adhesive (PSA) because of its good heat resistance and good compatibility with base polymers such as SIS, EVA, SBS, SEBS, and polyolefin. It can also be used in road marking, BOPP masterbatch, and rubber compounding.

CONSTAB UV 01880 LL is a high-concentrated UV protector intended for transparent and white injection molded PP articles. CONSTAB UV 01880 LL is compatible with polypropylene (PP) and is used primarily in injection molding within the printing and packaging markets.

CONSTAB UV 09030 LL presents a specially formulated product aimed at the UV stabilization of HDPE and PP slit fibers. With functions such as light stabilization, UV protection, and general stabilization, it's suitable for high-density polyethylene (HDPE) and polypropylene (PP), serving the printing and packaging industries.

POLYFIL GT is a foaming agent designed for use with a variety of compatible polymers and resins, including polyethylene terephthalate (PET), high-density polyethylene (HDPE), polylactic acid (PLA), polypropylene (PP), polycarbonates (PC), and acrylonitrile butadiene styrene (ABS). It is carried by high-density polyethylene (HDPE) in a resin-based formulation, making it suitable for various foaming applications in the plastics industry.

POLYFIL GTL-3 is a product that functions as a foaming agent. It is compatible with various polymers and resins, including polyethylene terephthalate (pet), high-density polyethylene (HDPE), polylactic acid (pla), polypropylenes (PP), polycarbonates (PC), and acrylonitrile butadiene styrene (abs). The recommended processing methods are blow molding, injection molding, and extrusion with a resin-based carrier using high-density polyethylene (HDPE).

POLYFIL CS is a foaming agent product. It is suitable for use with sheets, pipes, and profiles. The product is compatible with various polymers and resins, including linear low-density polyethylene (LLDPE), high-density polyethylene (HDPE), polystyrenes (PS), polypropylenes (PP), and low-density polyethylene (LDPE). The recommended processing method for POLYFIL CS is injection molding. The carrier used is resin-based, specifically low-density polyethylene (LDPE).

POLYFIL P functions as a foaming agent, generating microcells to reduce weight in fibers and nonwovens. It's a versatile solution suitable for PE, PP, and PS. It's compatible with a range of polymers and resins, including high-density polyethylene (HDPE), polystyrenes (PS), polypropylenes (PP), low-density polyethylene (LDPE), and linear low-density polyethylene (LLDPE). It accommodates processing methods like blow molding and injection molding. The carrier is low-density polyethylene (LDPE) within a resin-based matrix. Notable features include its contribution to lightness.

POLYFIL H1 is a product that functions as a foaming agent. It is compatible with linear low-density polyethylene (LLDPE), high-density polyethylene (HDPE), polystyrenes (PS), polypropylenes (PP), and low-density polyethylene (LDPE). The recommended processing methods are blow molding and injection molding, and the carrier is resin-based, using low-density polyethylene (LDPE). POLYFIL H1 is a high-active product suitable for pe, pp, and ps.

POLYFIL H is a foaming agent specifically designed for use with high-density polyethylene (HDPE), polystyrenes (PS), polypropylenes (PP), low-density polyethylene (LDPE), and linear low density polyethylene (LLDPE) as compatible polymers and resins. It is suitable for extrusion processing methods and is carried by low-density polyethylene (LDPE) in a resin-based formulation, making it ideal for various foaming applications in the plastics industry.

POLYFIL VM1 is a foaming agent designed for use with high-density polyethylene (HDPE), polystyrenes (PS), and polypropylenes (PP) as compatible polymers and resins. It is carried by ethylene propylene rubber (epm) in a resin-based formulation, making it suitable for various foaming applications in the plastics industry.

POLYFIL L is a microcellular, patented endothermic solution that serves as a foaming agent. It is compatible with linear low-density polyethylene (LLDPE), high-density polyethylene (HDPE), polystyrenes (PS), polypropylenes (PP), and low-density polyethylene (LDPE). The product can be processed using blow molding and injection molding methods, and its carrier is resin-based, using low-density polyethylene (LDPE).

ADINS® Clay Sil-1 is characterized by its free-flowing powder appearance. Achieving the desired improvements hinges on effectively dispersing ADINS synergists into the polymeric matrix.

The MBD 40170 is a masterbatch containing 5 % of an antistatic agent type ethoxylated amine and 10 % of an antiblock agent, on a PE low density base. For SDS, please contact Addiplast Group using the 'Request Document' button.

OPTIM® P-425 is a maleic anhydride modified homopolymer polypropylene. The grafting operation of the polypropylene backbone is achieved using a new technology that allows high grafting efficiency and low polymer scission.

MBD 40227 is a masterbatch filled with 2.5% fluorated processing aid on a LLDPE support. For SDS, please contact Addiplast Group using the 'Request Document' button.

PMB200MGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

PMB200PGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

PMB200OGGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

ECP 16E is a stainless steel fiber masterbatch within a Nylon 6/12 binder, 25% by weight. It can be used with Nylon 6, 6/6, 6/10, 6/12, PBT, PET.

OPTIM® P-425 IC is a maleic anhydride modified homopolymer polypropylene. The grafting operation of the polypropylene backbone is achieved using a new technology that allows high grafting efficiency and low polymer scission.

EverGlide® MB350 is a Linear Low Density Polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Mastertek 4205459 is a flame retardant masterbatch for use in PE and PP. Features Dust-free Benefits Contributes to a healthy workplace Less cleaning times Less product loss Cost saving

PMB200RGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

OPTIM® P-445 is a maleic anhydride modified homopolymer polypropylene. The grafting operation of the polypropylene backbone is achieved using a new technology that allows high grafting efficiency and low polymer scission.

PMB200OGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

NOVIS P-390 is a free radical modifier for polypropylene melt flow index. It is specifically used to improve the MFI of highly filled PP compounds.

EverGlide® MB150H is a Polypropylene homopolymer polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

PMB200BGP are photochromic in pellet form. They reversibly change color with exposure to sunlight or UV radiation in the range of 300 to 360nm. They are colorless in their un-reacted state.

BindEX E-183 is a maleic anhydride modified metallocene based linear low density polyethylene (mLLDPE) adhesive resin. It can be processed within different extrusion and co-extrusion technologies designed to process polyolefins. It is blendable with PP random copolymer up to 30% proportion.