Products in Parts, Shapes & Films

Bleached linen with melamine resin system. NP329 provides better arc resistance than NP320E. Also, resistant to ammonia based refrigerants. Hard, durable material should be heated to punch, but machines very well with standard machining equipment. NP329 meets UL94, HB.

Grade MC223 is a medium weave cotton phenolic composite. Typical applications include pintle and stave-type bearings for rudder shafts in the marine industry. This material is known industry wide as “Marine Micarta.” This product is also suitable for heavy equipment applications that require finer machining profiles than those provided by bearing-grade laminates.

NP310 is a canvas machining grade for structural and mechanical applications. It has better impact strength than phenolic paper grades. NP310 meets or exceeds the requirements of MIL-I-24768/16 and IEC-60893-4-PF CC 201.

MC511SN, StatNot™, is a static dissipative epoxy, woven glass based material with excellent control of the static dissipative properties. This material is used where static dissipation is required from surfaces to surface of the composite, in the x, y and z directions.

NP130HF is a woven glass fabric composite combined with epoxy resin system, which is engineered to provide better physical properties than standard NEMA FR-4. It is significantly more dimensionally stable than NP130 or NP510A because of its low resin content. The main application for NP130HF is for “bed-of-nails” probe boards used for printed circuit board testing, and other structural applications. Certification to IEC-60893-3-2 EP GC 202

Fine weave canvas phenolic engineered for dimensional stability and mechanical strength at temperatures as high as 125ºC. Providing excellent moisture resistance and easy to machine, NP342LS low-shrink material was designed for use in Class B generators for wedge applications and can be tested to the General Electric specification A50A341.

Grade MC320LE is a fine weave bleached cotton phenolic composite that has excellent machining characteristics and low moisture absorption. Applications include marine applications, terminal boards and parts requiring medium strength and excellent electrical characteristics. MC320LE meets or exceeds the requirements of MIL-I-24768/13 and ASMT F2953-12 Type FB. Certification to IEC standard is pending.

Woven glass fabric with high temperature phenolic resin. Good flexural, compressive and impact strengths at elevated temperatures. It is capable of continuous operation at 175°C. NP504 has excellent creep resistance because of the phenolic resin system. Meets MIL-I-24768/18 GPG. For NFPA 130 data please reference document NP504 Additional Data Sheet - NFPA 130. Certification to IEC standard is pending.

NP515LS is a woven glass fabric combined with a high temperature phenolic resin. It is engineered to provide superior shrink characteristics at elevated temperatures, making it an ideal material for insulating gaskets. Having been tested and certified as a NEMA G-3 material, NP515LS also meets or exceeds the requirements of IEC 60893-3-4 PF GC 201.

NP511EM is constructed of a woven glass fabric combined with a high temperature, easy machining epoxy resin. It has excellent mechanical strength and electrical properties at elevated temperatures. The continuous operating temperature is 190°C, in mechanical applications. This material meets NEMA G-11 and MIL-I-24768/3, Type GEB.

NP500A is constructed of a woven glass fabric combined with easy-machining, non-brominated epoxy resin. It is engineered to provide NEMA grade G-10 properties, but is easier to machine and more cost effective in many applications. Applications for NP500A include; low temperature thermal insulation, structural applications and various other mechanical, and electrical applications at low to moderately high temperatures. NP500A meets or exceeds the requirements of MIL-I-24768/2.

MC507U is a utility grade, glass fabric combined with a silicone resin system. It can be substituted for NEMA G-7, in most heating, appliance insulation and some bearing applications. MC507U has excellent strength and electrical properties. MC507U complies with MIL-I-24768/17 – GSG, with the exception of some specific electrical properties. Certification to IEC standard is pending.

NP510A is a woven glass fabric composite combined with epoxy resin system. It is engineered to provide NEMA grade FR-4 properties. This material contains bromine on the epoxy resin backbone. NP510A is certifiable to MIL-I-24768/27, Type GEE-F.

NP130 is a woven glass fabric combined with halogenated epoxy resin system. NP130 is produced to printed circuit board quality standards. It is flame retardant, and meets the requirements of MIL-I-24768/27, Type GEE-F and IEC-60893-3-2 EP GC 202.

Canvas machining grade for structural and mechanical applications. NP310HT has better impact strength than phenolic paper grades. It meets the requirements of MIL-I-24768/16, IEC-60893-4-PF CC 201 and is designed to meet GE specification A19B15B1.

NP500CR (commonly referred to as G10 CR) consists of a glass fabric with an epoxy resin system resulting in excellent electrical characteristics and superior physical properties at cryogenic temperatures (-270 °C to 135 °C operating temperature range). Previously designated as Westinghouse/International Paper Micarta Cryogenic Grade 56 G12, it has low thermal conductivity and utilizes chemistry specifically designed for cryogenic applications.

Utility grade canvas phenolic with properties similar to NP310E. Not certifiable to NEMA due to low crosswise flexural strength.

NP322 is composed of a linen substrate combined with a phenolic resin system which contains molybdenum disulfide for reduced wear and increased lubrication. Provides the same lubricity as NP313, but has better machining qualities. The mechanical strength is similar to, but slightly less than NP320. NP322 is used in applications where reduced wear is needed in non-conductive applications.

Fine weave (less than 4 ounce/square yard) cotton fabric commonly called linen, combined with phenolic resin to provide better machining than NP310. NP320 should be used for smaller and more intricate shapes than NP310, when a finer surface finish is required. NP320 meets or exceeds the requirements of MIL-I-24768/15 and IEC-60893-4-PF CC 203.

Fine weave canvas phenolic material with fabric construction weight intermediate to NP310 and NP320. NP342 is designed for better machining than grade NP310 and lower cost than NP320. NP342 meets or exceeds the requirements of MIL-I-24768/16 and IEC-60893-4-PF CC 201.

CGSTAPE - 7258 (8 mil) is a polyimide film, synthesized by polymerizing an aromatic dianhydride and an aromatic diamine. It possesses a unique combination of properties, including excellent electrical and physical properties over a wide range of temperatures.

RS-4050 is a rigid epoxy based magnetic castable microwave absorbing material capable of continuous operation up to 350°F. This material is ideal for fabrication of low power loads, attenuators, ring chokes and other RF absorbing elements at microwave frequencies. RS-4050 can be supplied in custom cast configurations, standard stock shapes of plates, rods and bars, or in pourable kits.

Neoflon PCTFE DF-0075C1 is a white solid film, excelling in water vapor barrier, transparency, chemical resistance, and electrical insulation. With optimal moisture prevention and less than 1% haze for transparency, it resists acids, alkalis, and organics over time. Enhanced wetting behavior through corona treatment. Targeting electrical and electronics and printing and packaging markets, it's ideal for healthcare packaging, wire and cable insulation, and pharmaceutical packaging.

Neoflon PFA AF-0250, available in a solid white film form, is meticulously crafted through melt extrusion with neoflon PFA material. This product's distinct molecular architecture blends carbon and fluorine atoms with the perfluoroalkoxyl group, ensuring exceptional heat resistance, chemical resilience, and nonflammability. Renowned for its nonadhesive nature, it seamlessly integrates fabricating capabilities like sealing, thermoforming, welding, and heat bonding. Catering to sectors such as automotive, electrical and electronics, aerospace, and transportation, it excels in applications like electrical components, printed circuit boards, and aircraft assemblies. Its specialized surface treatment further enhances compatibility with materials like adhesives, resins, and rubbers, amplifying its versatile utility across industries.

N-Fusion™ surfacing veils create advantages in manufacturing and the final product. N-Fusion™ delivers uniformity, no linting or loose fibers, and unmatched strength.

RS-4500 is a rigid epoxy based magnetic castable microwave absorbing material capable of continuous operation up to 350°F. This material is ideal for fabrication of low power loads, attenuators, ring chokes and other RF absorbing elements at microwave frequencies. RS-4500 can be supplied in custom cast configurations, standard stock shapes of plates, rods and bars, or in pourable kits.

Tedlar® TST20SG4 is a protective film that helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, the protective film provides long-term durability and performance. The protective film can easily be applied to a range of surfaces, providing the flexibility to design your way and the surface performance to keep it that way.

CGSTAPE - 7258 (2 mil) is a polyimide film, synthesized by polymerizing an aromatic dianhydride and an aromatic diamine. It possesses a unique combination of properties, including excellent electrical and physical properties over a wide range of temperatures.

Pacur® PETG FLEX is engineered for use in 0.003” to 0.009” gage applications and is extruded from PETG copolyester resin. PETG FLEX is an exceptionally tough material making it ideal for label and thermoforming applications.

Grade RT628 is an improved machining grade meeting NEMA XX for tubes. It has low moisture absorption and good dimensional stability. Typical applications are as a replacement for RT629 where improved machining characteristics are needed. The primary application is in transformers. Certification to IEC standard is pending.

Neoflon FEP NF-0250 is a white solid film crafted through melt extrusion using neoflon FEP material. Formulated with carbon and fluorine atoms, it offers remarkable heat resistance, chemical durability, and non-flammability. This film's attributes include excellent transparency, smoothness, and minimal stretchability, facilitating processes such as heat sealing, thermoforming, welding, and heat bonding. Additionally, its unique surface characteristics allow for adherence to materials like adhesives and resins. Serving diverse markets including automotive, electrical and electronics, aerospace, and transportation, it finds applications from printed circuit boards and wire and cable insulation to aircraft components.

Tedlar® TTR10SG3 is a protective film that helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, the protective film provides long-term durability and performance. The protective film can easily be applied to a range of surfaces, providing the flexibility to design your way and the surface performance to keep it that way.

Tedlar® TCW20BE3 is a protective film that helps extend the look and life of the design, even in the most extreme environments. It provides long-term durability and performance, withstanding severe weather and harsh chemicals. Tedlar® protective film can be easily applied to a range of surfaces, offering design flexibility and reliable surface performance.

Tedlar® TTR10BM3 is a protective film that helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, the protective film provides long-term durability and performance. The protective film can easily be applied to a range of surfaces, providing the flexibility to design your way and the surface performance to keep it that way.

Tedlar® TMR20SM3 is a protective film that helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, the protective film provides long-term durability and performance. The protective film can easily be applied to a range of surfaces, providing the flexibility to design your way and the surface performance to keep it that way.