Products in Parts, Shapes & Films

Nylatron® FST Polyamide PA66 is a fire, smoke, and toxicity retardant engineering plastic that is designed to withstand extreme temperatures up to 347° F / 175° C. This grade is JAR / FAR 25.853 compliant, making it the first engineering plastic to achieve this standard. It is specifically developed for aircraft interior environments and is often used as a replacement for metal parts in various applications such as brackets, seal bushings, slide rails, and duct seals.Features:Fire, smoke, and toxicity retardantWithstands temperatures up to 347° F / 175° CJAR / FAR 25.853 compliantBenefits:Provides superior fire safety for aircraft interior environmentsCan withstand extreme temperatures, making it suitable for high-temperature applicationsMeets industry standards for fire and smoke safety, making it a reliable and safe choice for various applicationsApplications:Aircraft interior environmentsBracketsSeal bushingsSlide railsDuct sealsOther high-temperature and fire safety applications.

Acetron® POM-H / Ertacetal® H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, and hardness, making it the ideal choice for a wide range of demanding applications. Its superior creep resistance and low thermal expansion rate make it stand out from copolymer acetal grades, making it the go-to material for small diameter, thin-walled bushings, bearings, gears, electrical components, medical and diagnostic equipment, valves, and fluid handling components.Features:Superior mechanical strength, stiffness, and hardnessExceptional creep resistanceLow thermal expansion rateHigh wear resistanceBenefits:Durable and long-lasting performanceEasy installation and removal with minimal distortionHigh resistance to chemical wearHigh impact strength, even at low temperaturesExcellent dimensional stabilityApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components

Ertacetal® C POM-C / Acetron® GP Polyoxymethylene POM-C is a general purpose, copolymer acetal grade that is known for its porosity-free nature and low moisture absorption. These POM-C shapes also offer excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments.Features:Porosity-free materialLow moisture absorptionExcellent machinabilityBenefits:Suitable for use in food contact and medical applicationsMeets FDA, NSF, Canada AG, and SSI Standard compliance requirementsCan be used in a variety of environmentsApplications:Food processing and packaging equipmentMedical and diagnostic equipmentBearings and bushingsGears and electrical componentsValves and fluid handling components

Nylatron® GS PA66 is a premium grade of Polyamide PA66, reinforced with Molybdenum Disulphide (MoS2) to enhance its mechanical properties. This unique combination of materials offers outstanding strength, rigidity, and a lower coefficient of linear thermal expansion than other nylon products.Features:High mechanical strength, stiffness, hardness, and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding propertiesExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Good machinabilityBenefits:Maintains fits and clearances, reducing the likelihood of seizing as bearingsEnhanced bearing and wear properties due to MoS2Excellent performance in high-precision applicationsApplications:Ideal for use in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats, and seals in construction and heavy equipment industries.Can also be used in other high wear and load-bearing applications.Nylatron® GS PA66 is a superior choice for applications that require high strength, rigidity and wear resistance, making it a perfect solution for construction and heavy equipment industries.

Duratron® D7000 PI Polyimide shapes - a high-performance material ideal for demanding applications that require exceptional thermal resistance, low wear and friction, strength, and impact resistance. With superior electrical and thermal insulation properties, outstanding mechanical performance, great chemical resistance, and outstanding dimensional stability, Duratron® D7000 PI is an ideal solution for designs that reduce weight, extend service life, and reduce overall costs.Features:Superior electrical and thermal insulation propertiesOutstanding mechanical performanceGreat chemical resistanceHigh strength and toughnessOutstanding dimensional stabilityBenefits:Ideal for designs that reduce weightExtends service life before maintenance or replacementReduces overall costs by increasing process uptimeApplications:AerospaceTransportationIndustrialDuratron® D7000 PI is available in stock shapes and direct formed parts, perfect for smaller series and designs where tolerances and geometry of the end part require machining. The material is also available in Hot Compression Molded (HCM) shapes, providing designers with the greatest economy and flexibility.

Ertalyte® is a high-performance polyethylene terephthalate polyester (PET) produced by Mitsubishi Chemical Advanced Materials. With its exceptional wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, Ertalyte® is the ideal material for applications that require sustained high loads and high-temperature performance.Features:Excellent wear resistanceLow coefficient of frictionHigh strength and toughnessResistant to moderately acidic solutionsRetains more of its original strength up to 180° F / 85° C than nylons or acetalsBenefits:Capable of sustaining high loadsIdeal for applications requiring high-temperature performanceExtends the service life of componentsLow maintenance and repair costsSuitable for use in harsh environmentsApplications:PharmaceuticalFood processing and packagingOil and gasBearings and structural applicationsAny application requiring high load and high-temperature performance.

Duratron® T4503 PAI Polyamide-imide is a compression molded material that offers exceptional electrical insulation properties and excellent dimensional stability. This grade is often selected for extreme applications where large geometries are required, such as dies or thermal insulators. It has a similar composition to Duratron® T4203 PAI and is known for its high compressive strength, elongation, and impact resistance.Features:Outstanding electrical insulation propertiesExcellent dimensional stabilityHigh compressive strength and elongationImpact resistanceBenefits:Suitable for extreme applications such as dies and thermal insulatorsCan be used for large geometriesCan be used for electrical connectors and insulatorsApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearHigh Temperature Electrical ConnectorsBearing CagesCan Mandrel

Zeniva® ZA-500 PEEK is a high-performance specialty polymer known for its remarkable strength, advanced stiffness, and exceptional toughness. Specifically designed for structural, load-bearing implantable medical devices, this bio-stable plastic offers excellent fatigue and creep resistance, ensuring durability under continuous strain and repeated loading. In comparison to metals, it presents advantages such as reduced stress shielding, absence of heavy metal allergies or ion erosion, and radiolucent properties for interference-free X-ray and CT scanning procedures.

Ertalon® 6 XAU+ Polyamide PA6 is a polyamide PA6 material that is heat-stabilized and boasts a dense and highly crystalline structure. This material offers superior heat aging performance in air, making it a reliable choice for bearings and other mechanical parts that are subject to wear and that operate at high temperatures for extended periods of time.Features:Heat-stabilizedHighly dense, crystalline structureSuperior heat aging performance in airBenefits:Reliable wear resistance and performance at service temperatures over 60°C (140°F)Ideal for use in bearings and other mechanical parts that are subject to wear and that operate at high temperatures for extended periods of timeApplications:Bearings and other mechanical parts in high temperature environmentsIndustrial machinery and equipmentAutomotive and transportation industriesOther applications where heat and wear resistance are critical factors.

ELCRES™ Dielectric Film HTV150A by SABIC is designed to meet high-temperature demands for professional DC-Link power capacitors, catering to evolving high-voltage industry needs. With stability across temperatures (-40°C to +150°C) and frequencies (up to 100 kHz), ELCRES™ HTV150A film offers consistent properties. This includes sustained capacitance, robust insulation resistance, a steady dielectric constant (Dk), and a minimal dissipation factor (Df).

ROSECO® Mulch Film SM1 is a biocompostable black mulch film with high strength and mechanical performance. This layer of black mulch stops light from penetrating, encourages photosynthesis, keeps the soil moist, inhibits weed growth, boosts yield, and saves harvesting expenses.

SABIC's Specialties Business ULTEM™ Dielectric Film UTF120 provides solutions for small to medium-sized, professional-grade capacitors, up to 10 microfarads in capacitance, to meet challenging industry requirements. The film exhibits stable properties across a range of temperatures (-40°C to +150 °C) and frequencies, including stable capacitance, good insulation resistance, a stable dielectric constant (Dk), and a low dissipation factor (Df). ULTEM™ Dielectric Film UTF120 has been validated by customers for use with both film-foil and metalized electrodes, including flat aluminum, heavy edge/light body, and fused/patterned electrode designs. It also offers excellent handling through metallization, winding, and capacitor squashing/flattening. Capacitors using this film are capable of passing industry-standard 260°C reflow soldering processes. It is available in 4, 5, 7, and 10-micron gauges and sold in 620mm x 5000m size rolls.

CDF Foil Material #ROLL 48X 200-05-09 is a specialty foil material used for applications where oxygen and moisture vapor protection are important. It can be used to protect objects from dust, grease, or other contaminates. This material conforms to FDA regulations, Part 177.1520 CFR, for direct food contact.

CDF Foil Material #ROLL 24X 200-05-09 is a specialty foil material used for applications where oxygen and moisture vapor protection are important. It can be used to protect objects from dust, grease, or other contaminates. This material conforms to FDA regulations, Part 177.1520 CFR, for direct food contact.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50HK(KN) is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 250NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50LM is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 100N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 21GS is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 40N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 200NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 12N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

Poraver® 2 - 4 mm mm is an expanded glass granulate, provides a lightweight aggregate solution suitable for diverse applications.

Poraver® 0.5 - 1 mm mm is an expanded glass granulate, provides a lightweight aggregate solution suitable for diverse applications.

Poraver® 0.25 - 0.5 mm mm is an expanded glass granulate, provides a lightweight aggregate solution suitable for diverse applications.

Poraver® 1 - 2 mm mm is an expanded glass granulate, provides a lightweight aggregate solution suitable for diverse applications.

Manufactured with a cotton fabric and phenolic resin, NP310E is easy to machine and possesses lower moisture absorption and enhanced electrical properties. NP310E meets or exceeds the requirements of MIL-I-24768/14.

Woven glass fabric combined with a high temperature polyimide resin system engineered to maintain excellent physical properties at 240°C. P95 has a low coefficient of thermal expansion, high mechanical strength and excellent heat resistance. Certification to IEC standard is pending.

Similar to NP320 with improved moisture resistance. It is suitable for electrical applications in moderate humidity conditions. NP320E meets or exceeds the requirements of MIL-I-24768/13 and ASTM F2953-12 Type FB. Certification to IEC standard is pending.

NP310 is a canvas machining grade for structural and mechanical applications. It has better impact strength than phenolic paper grades. NP310 meets or exceeds the requirements of MIL-I-24768/16 and IEC-60893-4-PF CC 201.

NP130 is a woven glass fabric combined with halogenated epoxy resin system. NP130 is produced to printed circuit board quality standards. It is flame retardant, and meets the requirements of MIL-I-24768/27, Type GEE-F and IEC-60893-3-2 EP GC 202.

MC507U is a utility grade, glass fabric combined with a silicone resin system. It can be substituted for NEMA G-7, in most heating, appliance insulation and some bearing applications. MC507U has excellent strength and electrical properties. MC507U complies with MIL-I-24768/17 – GSG, with the exception of some specific electrical properties. Certification to IEC standard is pending.