Products in Processing Aids

EURIKAWAX LP 300 is a polyolefin wax used as fluidity and dispersing agent of concentrates in master batches, lubricants for PVC and rubber.

AMSil™-F H22 is a hydrophobic silica, fumed and precipitated silicas are used in a wide range of applications

Vitrolite® is a naturally occurring mineral and with concentrations of less than 0.5% has a profound effect on polymer melts. Vitrolite® is effective in reducing polymer melt viscosity without adversely affecting the finished polymer mechanical properties. Vitrolite is not known to chemically interact with polymers or additives, and has been widely used in the polymer industry. It is not essentially inert but it is stable (millions of years in age) and does not change its effect upon multiple uses (e.g., compounding followed by molding).

EverGlide® MB1950 is a Polyamide 6 polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

BRUGGOLEN® P22 is a highly efficient nucleating agent for polyamides. The addition of Bruggolen® P22 to the polymer melt leads to fine particles which induce a very fine and homogeneous crystalline structure.FeaturesIncreases crystallinityReduces cycle time during injection moldingImproves dimensional stability - significant reduction of warping in GF-reinforced compoundsImproves mechanical properties (tensile strength, stiffness, flexural modulus, etc.)Increases heat distortion temperatureNon-volatile; non-extractable

A release agent that in most cases provides a heat-stable film that does not carbonize at temperatures that quickly destroy many organic mold release agents. Effective as a parting agent in die casting aluminum, zinc, magnesium and other metals

GrapheneBlack™ 3X is NanoXplore's slightly larger pristine few-layer-graphene designed for multi-functional performance improvements in a wide range of markets and technologies. GrapheneBlack can be used in thermoplastics, thermosets, concrete, coatings, lubricants, and rubbers and enables manufacturers to cost-effectively improve long term product performance.

Calumet Specialty Products Partners L.P. Mineral Jelly No. 5 is comprised of Petrolatum. It is commonly used

MicroFLON S-Series powders are Natural Prime PTFE micronized to various particle sizes. In thermoplastics and elastomers, MicroFLON® S facilitates lubrication and wear resistance. The tight process and particle size control typical of the MicroFLON® product line allows for easy dispersion, and distribution of the product.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

AMSil™ 355 is a hydrophobic silica, fumed and precipitated silicas are used in a wide range of applications

AMSil™ 805 is a hydrophobic silica, fumed and precipitated silicas are used in a wide range of applications

Mosselman Zinc Stearate (91051-01-3, 557-05-1) is a water-insoluble soap of commercial stearic acid.

AMSil™ 35 FGK is a hydrophobic silica, fumed and precipitated silicas are used in a wide range of applications

K - STOFF T is a unique MPA for filled compounds, which offers excellent bonding, to filler & polymer with the enhanced flow & improved mechanical properties.

AMSil™ 668 is a hydrophobic silica, fumed and precipitated silicas are used in a wide range of applications

Masterbatch PRZ T00299 is a cost effective purging and shutdown additive based on a special blend of additives that impart a scouring and cleaning mechanism to purge unwanted contaminants from the extrusion process with an additive to withstand degradation during down time.

iD Additives™ is proud to introduce iD Purge™ Purging Compounds including grades which deliver the following benefits to your company and bottom line.

iD Additives™ is proud to introduce iD Purge™ Purging Compounds including grades which deliver the following benefits to your company and bottom line.

Calumet Specialty Products Partners L.P. Mineral Jelly No. 20 is comprised of Petrolatum. It is commonly used

Polyflon PTFE L-5 is a white powder with a solid form, designed for the industrial market with a focus on fluids and lubricants. Known for its odor-free properties, it offers excellent lubricity and wear resistance. This product is compatible with polymers like polyamides and polycarbonates (PC), primarily used for greases in chemical and industrial manufacturing applications.