Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Thermoset Resins
Products in Thermoset Resins
922 Products found in Thermoset Resins
Browse
Applications
Show All 5 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
MARTE SpA
Ares® P802
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters
Ares P802 is DCPD resin for the production of panels characterized by low shrinkage and high dimensional stability.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh AH 110TGS
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Construction Applications, Textile Applications, General Purpose
Flexural Strength:
118.0 - 138.0 MPa
Ebalta AH 110 / TGS is a non-filled epoxy resin with high strength and dimensional stability, even at increasing temperature. It also can be used as casting resin with powder fillers as aluminum powder, as laminating resin with glass fabrics and as binding resin with granular fillers as aluminum granules. Depending on the application if just needs to use a different hardener for the mixture. As laminating resin AH 110 / TGS is suitable for thin high solid laminates.
Sino Polymer
Sino Polymer MERICAN 962
Polymer Name:
Vinyl Ester Resin
Chemiplastica
Urochem 171
Polymer Name:
Urea Formaldehyde Resin (UF)
Processing Methods:
Injection Molding
End Uses:
Toilet Seats, Housings, Closures, Appliances, Electrical Components, Cosmetic Packaging, Caps, Cable Jacketing
Density:
1500.0 - 1500.0 kg/m³
Tensile Strength:
45.0 - 45.0 MPa
Urochem 171 Molding Compounds can be supplied in an almost unlimited range of colors from translucent light pastels to black. Molded parts are free from odor; UV stable with good moisture resistance. Hard, glossy and scratch resistant surface. Excellent chemical resistance. Fats, oils and common organic solvents like alcohol and acetone do not attack molded parts which are also resistant to surfactants and weak bases. They will withstand attack from weak acids for a shorter duration. Excellent electrical properties (arc quenching, tracking, flame resistance). Oxygen index of 30% is achieved without the use of external flame retardants. No halogens are present in the composition.
Saudi Industrial Resins
Siropol 992 FR
Polymer Name:
Vinyl Ester Resin
Processing Methods:
Spray Lay-Up, Filament Winding, Hand Lay-Up
End Uses:
Tanks, Pipes
Cure Method:
Chemical Cure
SIROPOL 992 FR resin is a medium viscosity, unprompted flame retardant vinylester-based resin. Laminates made with SIROPOL 992 FR resin have achieved Flame retardancy BS476: Part 7:1997 Class I rating with 3% antimony trioxide and Flame retardancy ASTM E-84 Class I rating with 3 % antimony trioxide.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh MG 807 FR Comp. A+B
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Modeling Material
Density:
1280.0 - 1320.0 kg/m³
Tensile Strength:
2.0 - 8.0 MPa
This product is a polyurethane system. The processing is preferably made in customary vacuum pouring plant. Manual processing possible. Mouldmaterial: we recommend silicone molds, for example Silastic® RTV 4234-T4O.
DUGALAK
DEPOL SH
Polymer Name:
Thermoset Polyester
Processing Methods:
Spray Lay-Up, Filament Winding, Hand Lay-Up
DEPOL SH is a middle reactive, self-extinguishing unsaturated HET-acid based polyester resin.
Swancor
Swancor 2559
Polymer Name:
Epoxy Resins & Compounds
Chemical Family:
Epoxy & Epoxy Derivatives
SWANCOR 2559 is a high Tg hot-melt epoxy resin. The formula does not contain Diuron and volatile ingredients. It has the characteristics of light weight, excellent mechanical strength, heat resistance and corrosion resistance.
HK Research
HK Research R0229
Polymer Name:
Thermoset Polyester
Processing Methods:
Casting
Cure Method:
Chemical Cure
Density:
1110.0 - 1110.0 kg/m³
HK Research R0229 resilient, acrylic modified isophthalic casting resin was developed specifically for use with 2,4 Pentanedione Peroxides to offer a faster curing and demolding system for densified casting manufacturers. The use of this special catalyst with the R0229 resin will give the molder castings that will approximate the cure of the BPO-cured resin systems without the amber color usually associated with the BPO-cured systems. White and light pastel-colored castings of R0229 using 2,4 Pentanedione Peroxide do have a slightly green color due to the decomposition products of the catalyst. This green cast is not readily evident in darker solid colors or dark granite castings.
Fudow Company
Fudow Company F900
Polymer Name:
Phenol Formaldehyde (PF)
Processing Methods:
Transfer Molding, Injection Molding, Compression Molding
End Uses:
Automotive Components, Switches, Electrical/Electronic Applications, Automotive Interior Parts, Bobbins, Relay Bases, Automotive Electronics, Automotive Applications
Fudow Company F900 is an organic filler.
Crosslink Technology Inc.
Crosslink Technologies CLR1157
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Encapsulant, Electrical/Electronic Applications, Electric Motors, Electrical Components
CLR1157 is a heat cure, low stress, extremely tough, epoxy casting compound. The product was specifically designed for casting electrical motors. the cured material exhibits excellent thermal stability and thermal cycling characteristics.
Duresco
Duresco NU 460 T/NU 460 U
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Injection Molding, Encapsulating, Transfer Molding
End Uses:
Bushings
Volume Resistivity:
10000000000000.0 - 10000000000000.0 Ohm-m
Flexural Strength:
130.0 - 130.0 MPa
Duresco NU 460 T/NU 460 U is a Glass fiber reinforced epoxy molding compound with good mechanical properties.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh AH 140TC 60
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Laminating
End Uses:
Automotive Interior Parts, Aircraft Interiors, Marine Applications, Aircraft Applications, Laminates, Automotive Applications, Aerospace Applications, Automotive Exterior Parts
Flexural Strength:
110.0 - 130.0 MPa
Ebalta AH 140 / TC 60 is a temperature resistant laminating resin.
Kemrock Industries and Exports
Kemrock Industries and Exports KPR 6100
Density:
1120.0 - 1120.0 kg/m³
KPR 6100 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6100 is used in laminations.
BCC Products
BCC Resins™ BC 6004
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Coating
BC 6004 is a white thixotropic epoxy surface coat that had the ability to cure and bond to freshly poured wet plaster. This formulated resin compound can be applied with a brush or troweled to a thickness of 1/8" or less on vertical surfaces or over sharp radii without sag or fear of run-off. BC 6004 features moderate heat resistance and tracing hardness.Procedure for Plastic Faced Plaster Applications:BC 6004 should be applied over a properly mold-released surface so that positive removal of the surface coated plaster casting is assured. For best results, two coats approximately 1/16" thick should be used. The first coat should be brushed over the entire surface and then allowed to cure to a gelled or very tacky state. The second coat should be applied over the first. If hemp, glass or other fibrous plaster reinforcements are to be used, they should be placed in the freshly applied second coat immediately. Plaster can then be poured against the wet, second coat of BC 6004. To achieve good adhesion of the epoxy to the plaster, it is recommended that the plaster be poured immediately. The application of two coats of BC 6004 will eliminate surface porosity that sometimes occurs when fast setting, "hot" plaster compounds are cast over a single coat of epoxy.
Kemrock Industries and Exports
Kemrock Industries and Exports KPR 6420
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Processing Methods:
Pultrusion
Density:
1120.0 - 1120.0 kg/m³
KPR 6420 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6420 is suitable for processing by pultrusion. Recommended for FRP composites.
Lati Industria Thermoplastici S.p.A
Lastane™ 50 G/25
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Injection Molding
End Uses:
Footwear, Machine/Mechanical Parts, Gears, Textile Applications
Density:
1350.0 - 1350.0 kg/m³
Polyurethane (PUR) based compound. Glass fibres. Very good noise reduction. Good impact resistance even at low temperature.
Sumitomo Bakelite Company
Insul-Plate™ Hole-Fill
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Compression Molding
Flexural Strength:
96.0 - 96.0 MPa
Insul-Plate™ Hole-Fill by Sumitomo Bakelite Company is commonly used as Molding Resin for a variety of applications. It is available in Powder form.
ATTIKA
ATTSHIELD OP 745
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Orthophthalics, Unsaturated Polyester (UPE)
Cure Method:
Air Dry, Chemical Cure
Processing Methods:
Spray Lay-up, Casting
ATTSHIELD OP 745 is used and recommended for boats, water tanks, septic tanks, bathtubs, cooling towers, and other items. By hand molding and spraying.
Hapco Inc.
Di-Pak™ E-4595-3
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4500 SERIESFlexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Flame retardant (FR), accelerated 3 minute (-3) gel time, and black or unpigmented versions are available.
BCC Products
BCC Resins™ BC 5114
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Lamination
End Uses:
Laminates
BC 5114 is a gray low viscosity laminating system. This heat resistant resin exhibits excellent wet out, reasonable working time and may be used at room temperature without postcuring. For use above 150°F a post-cure is required. Post cure for applications requiring temperatures above 150°F can be accomplished in an oven or in use by a gradual heat rise; 2hours @ 150°F, plus 2 hours @ 250°F, plus 2 hours at 300°F. BC 5105 can afford consistent use to 300°F if required. Does not contain VCHD or MDA. Typical uses include constructing vacuum form tools, Injection and compression molds, RTM and RIM molds, and matched dies.
Fudow Company
Fudow Company F5770F
Polymer Name:
Phenol Formaldehyde (PF)
Processing Methods:
Transfer Molding, Injection Molding, Compression Molding
End Uses:
Automotive Components, Switches, Electrical/Electronic Applications, Automotive Interior Parts, Automotive Electronics, Automotive Applications
Fudow Company F5770F is glass fiber.
Telene
Telene® 1660
Polymer Name:
Polydicyclopentadiene (PDCPD)
Processing Methods:
Injection Molding, Reaction Injection Molding (RIM)
End Uses:
Fenders, Automotive Under The Hood, Engine Covers, Automotive Bumpers, Automotive Exterior Parts
Telene® 1660 technology utilizes ring opening metathesis polymerization (ROMP). Formulations are based on dicyclopentadiene (DCPD) and engineered to produce polydicyclopentadiene polymer (PDCPD), well-known for its robust mechanical properties at low temperatures, its low water absorption, and its radio transparency.
Fudow Company
Fudow Company F5800F
Polymer Name:
Phenol Formaldehyde (PF)
Processing Methods:
Transfer Molding, Injection Molding, Compression Molding
End Uses:
Automotive Components, Switches, Electrical/Electronic Applications, Automotive Interior Parts, Bobbins, Relay Bases, Automotive Electronics, Automotive Applications
Fudow Company F5800F is a Organic filler.
Ovation Polymers
Nemcon™ H PU DP124/X2
Polymer Name:
Polyurethane (MDI-based)
Processing Methods:
Injection Molding
End Uses:
Medical/Healthcare Applications, Medical Devices
Density:
1550.0 - 1550.0 kg/m³
Nemcon™ H-series products are designed for use in applications where heat removal is critical to system performance. Nemcon™ H PU DP124/X2 is thermally conductive polyurethane, available as an injection moldable grade to replace metals in enclosures and medical device parts. It should be used in applications where thermal management must be accomplished along with esthetics and cost-effectiveness.
Shanghai Sanzheng Polymer Material
Shanghai Sanzheng Polymer Material Silane Cross-Linkable PE Compound 4234
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Shanghai Sanzheng Polymer Material Silane Cross-Linkable PE Compound 4234 is sioplas (two steps) silane XLPE compound and suitable for 1kv and below low voltage cable, it is composed by 95% silane crosslinkable low density polyethylene (compound A) and 5% catalyst (compound B). The product has outstanding performance in high speed extrusion, smooth cable surface, wild processing temperature, easy processing and convenient to use.
BCC Products
BCC Resins™ BC 8086
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
BCC Resins BC 8086 is a Polyurethane product. It can be processed by casting and is available in North America. Primary characteristic: low viscosity.
Automotive Compounding Industry (Perplastic Group)
Automotive Compounding Industry (Perplastic Group) XLPE T4 - 3
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables
Vikram Resins and Polymers
Vikram Resins and Polymers VRP 2121
Processing Methods:
Resin Transfer Molding, Hand Lay-Up
Cure Method:
Chemical Cure
Density:
1120.0 - 1120.0 kg/m³
Vikram Resins and Polymers VRP 2121 is a medium reactive Orthophthalic Acid based Unsaturated Polyester Resin designed for lamination purposes. It has a low viscosity, good wetting, good mechanical properties, and is fast curing. VRP 2121 is suitable for hand lay-up, RTM, and other molding techniques and can be supplied as a pre-accelerated, thixotropic, or low viscosity resin.
Raptor Resins
Raptor Resins BMI-1
Polymer Name:
Polybismaleimide
Raptor Resins BMI-1 is a high-temperature Bismaleimide resins with features that you may need in your application.
Materia
Proxima® HTI 1400
Applications:
Marine, Transportation
Product Families:
Other Thermoset Resins, Thermoset Resins
Chemical Family:
Polyolefins, Olefins
Polymer Name:
Polydicyclopentadiene (PDCPD), Polyolefin (unspecified)
End Uses:
Marine Applications
Proxima® HTI 1400 subsea thermal insulation polymer supports production of subsea reservoirs with oil temperatures up to 400°F (204°C) without resorting to pipe-in-pipe or subsea cooling technology, reducing cost for projects in ultra-deep water. Proxima® HTI 1400 provides a cost-effective solution to customers requiring high-temperature subsea flowlines and equipment.
BCC Products
BCC Resins™ BC 8007
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Modeling Material
BCC Lik-Wood is a low viscosity, quick setting, easy to use casting material. A model or tool cast from Lik-Wood will weigh 60% less than other filled urethane systems. Within 30 minutes after mixing and pouring, Lik-Wood is ready to be carved, sanded, filed, tapped, etc.. Its amazing wood-like characteristics make it ideal for light-weight backing of laminates and/or surface coats. Perfect for fast take offs, cores, engineering changes, temporary molds, patterns, models, prototypes, and bases for die models.Handling Properties:BCC's Lik-Wood is a fast-setting, two part casting system which requires careful preparation prior to mixing parts A and B. Because Lik-Wood contains components having very low density there will be some separation at the surface of the material in its container. Using a paint shaker, jiffy mixer, or mixing spatula, re-suspension of the ingredients is easily accomplished. Precaution should be taken to prevent any moisture contamination from containers or utensils. It is recommended that the work area be well ventilated and normal cleanliness and safety rules be observed. Avoid prolonged exposure to vapors and contact with skin.Preparation of Mold Surface:Clean the surface from dust and possible presence of moisture. Apply BC 87 Parting Agent and polish to a uniform high gloss finish (usually 2-3 coats are recommended). For wood surfaces, 2-3 coats of a high quality sanding sealer is necessary. For plaster surfaces, seal with PVC sealer to ensure complete absence of moisture. For both wood and plaster surfaces, follow with 2-3 coats of 87 Parting Agent.Mixing and Pouring:Pour weighed or measured amounts of Part A & B into a separate dry container by pouring Part A into Part B. Mix with a spatula or mechanical stirrer for 30-40 seconds for quart size batches or 40-50 seconds for gallon batches while avoiding air entrapment. Immediately pour mixed resin uninterrupted from a convenient height above the mold cavity to resist air bubble entrapment. Clean your mixing tools by rinsing in an alcohol type solvent. Larger masses (2 feet or more) may be built up with successive pours. Castings may be demolded within 30-60 minutes but should be properly supported while "green". Under normal conditions, maximum hardness or cure will be achieved in 12-18 hours.
DIC Corporation
Pandex™ 727
Polymer Name:
Polyurethane (unspecified)
PANDEX, WALL-LITE series are single-pack and twin-pack polyurethane resins developed for waterproofing of rooftops and walls and adhesion of rubber chips. The series characteristically excel in workability and hardening effects.
BB Resins
BB Resins BB-EPA 1100
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Coating
BB Resins BB-EPA 1100 is a medium viscosity unmodified epoxy resin obtained by blend of Bisphenol A/Bisphenol F based resins.
Lucobit AG
Lucobit® 1221
Polymer Name:
Polyethylene Copolymer
Processing Methods:
Film Extrusion, Profile Extrusion, Injection Molding
End Uses:
Roofing Membranes, Construction Applications
Density:
970.0 - 970.0 kg/m³
Lucobit® 1221 by Lucobit AG is comprised of Crosslinkable Polyethylene and Polyethylene Copolymer. It is commonly used It is available in Granules form.
RECKLI
RECKLI Epoxy BT
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Thin Coatings
Epoxy BT is a thixotropic pigmented epoxy resin coating.
Show
36
of 922 results
Go to page
1
2
3
4
5
6
7
8
9
10