Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Thermoset Resins
Products in Thermoset Resins
922 Products found in Thermoset Resins
Browse
Applications
Show All 5 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
BCC Products
BCC Resins™ MB1150
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Foam Processing, Machining
End Uses:
Molds/Dies/Tools, Modeling Material, Prototyping, Agricultural Applications, Automotive Applications, Aerospace Applications
MB 1150 is an Avocado colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1150 is low density foam of approximately 15lbs/ft³ board. Easily cut using CNC machining equipment or by hand the MB 1150 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.
MARTE SpA
Ares® P100
Applications:
Marine, Housewares, Interior
Product Families:
Thermoset Resins, Polyesters, Polymers & Resins
Chemical Family:
Unsaturated Polyester (UPE), Polyesters, Orthophthalics
Polymer Name:
Thermoset Polyester
End Uses:
Yacht, Marine Applications, Safety Helmets
Ares P100 is orthophthalic resin with good reactivity, good elongation, versatile for all sectors. Good mechanical characteristics, compatibility with glass fibers and good wettability of the fillers. Clear resin ideal for spray up.
Condor Compounds
CONLink® S 4250
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
End Uses:
Cables, Wires
CONLink® S 4250 is for high-performance wire & cable applications, where higher temperature, abrasion & chemical resistance are required, the compound must be crosslinked. Condor Compounds offers a broad range of cross-linkable compounds for the wire and cable industry according to various specifications.
Crosslink Technology Inc.
Crosslink Technologies XRD1018
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Potting, Casting
End Uses:
Electrical/Electronic Applications, Electrical Components, General Purpose, Encapsulant
Volume Resistivity:
2000000000000.0 - 2000000000000.0 Ohm-m
XRD1018 is a two component, room temperature cure semi-flexible, flame retardant, epoxy system. The system was developed for potting/casting of electrical and electronic components. its use of non-abrasive fillers and convenient 1 to 1 ratio by volume, make it ideal for use in machine dispensing equipment. This product meets ul94-v0 in house flammability testing.
BCC Products
BCC Resins™ MB1100
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Foam Processing, Machining
End Uses:
Molds/Dies/Tools, Modeling Material, Prototyping, Agricultural Applications, Automotive Applications, Aerospace Applications
MB 1100 is an Olive colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1100 is low density foam of approximately 10lbs/ft³ board. Easily cut using CNC machining equipment or by hand the MB 1100 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.
Lucobit AG
Lucobit® 1233
Polymer Name:
Polyethylene Copolymer
Processing Methods:
Film Extrusion, Profile Extrusion, Injection Molding
End Uses:
Roofing Membranes, Construction Applications
Density:
960.0 - 960.0 kg/m³
Lucobit® 1233 by Lucobit AG is comprised of Crosslinkable Polyethylene and Polyethylene Copolymer. It is commonly used It is available in Granules form.
Precision Associates inc.
Precision Associates inc. 35725
Polymer Name:
Polyurethane (unspecified)
End Uses:
Food Packaging
Precision Associates inc. 35725 is a 70 durometer white colored polyurethane, formulated with FDA approved ingredients. It is also approved for use in milk and edible oils.
Austin Novel Materials
TEXALAN® 365A
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Extrusion, Injection Molding
End Uses:
Cables, Pipes, Film, Flexible Packaging, Belts & Belt Repair, Automotive Applications, Automotive Exterior Parts
Density:
1190.0 - 1190.0 kg/m³
Tensile Strength:
28.0 - 28.0 MPa
Texalan® 365A product has excellent wear resistance, oil/solvent resistance, low temperature flexural resistance, high resilience, and bending resistance foldability.
MARTE SpA
Ares® P114
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Orthophthalics, Unsaturated Polyester (UPE)
Ares P114 is medium reactivity orthophthalic resin with high transparency, with controlled peak to avoid tension. Excellent brilliance. Available in low or high viscosity. It is suitable for casting, for sheets and transparent objects.
BCC Products
BCC Resins™ BC 7062-3H
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Molds/Dies/Tools, Modeling Material, Prototyping
BC 7062 are aluminum filled, low viscosity epoxy mass casting resins. These room temperature cure systems allow the user choice thicknesses of 1/8 inch to a maximum of 6 inches without foaming or yielding excessive shrinkage. Casting thicknesses may be increased by incorporating aluminum needles, puffs or granules. BC 7062, when properly cured, provides nearly perfect reproduction, resulting in a dimensionally stable, hard, tough surface. For use in constructing duplicate models, prototypes, patterns, facing dies, etc.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 708PUR 4
Polymer Name:
Polyurethane (unspecified)
End Uses:
Foundry Dressings
Density:
1170.0 - 1230.0 kg/m³
Tensile Strength:
45.0 - 55.0 MPa
GM 708 is a high-quality, almost odorless 2-components-polyurethane casting compound without any filler. The filler will only be added when mixing both components. The long potlife of more than 45 min makes it possible to cast big-volume parts. Depending on the application, different dry fillers can be used. To get optimum properties, especially low shrinkage, we recommend a high filler content.
MARTE SpA
Ares® P802
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters
Ares P802 is DCPD resin for the production of panels characterized by low shrinkage and high dimensional stability.
Condor Compounds
CONLink® S 4310
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
End Uses:
Cables, Wires
Tensile Strength:
11.0 - 11.0 MPa
CONLink® S 4310 is for high-performance wire & cable applications, where higher temperature, abrasion & chemical resistance are required, the compound must be crosslinked. Condor Compounds offers a broad range of cross-linkable compounds for the wire and cable industry according to various specifications.
BIP (Oldbury) Ltd.
Beetafin™ BF2815
Polymer Name:
Polyester (unspecified), Polyurethane (MDI-based)
Beetafin™ BF2815 is a water based Polyurethane emulsion having excellent compatibility with most common water-based systems. The product is suitable for application to a variety of substrates where high quality and longevity are prime requirements.
Chemiplastica
Urochem 171
Polymer Name:
Urea Formaldehyde Resin (UF)
Processing Methods:
Injection Molding
End Uses:
Toilet Seats, Housings, Closures, Appliances, Electrical Components, Cosmetic Packaging, Caps, Cable Jacketing
Density:
1500.0 - 1500.0 kg/m³
Tensile Strength:
45.0 - 45.0 MPa
Urochem 171 Molding Compounds can be supplied in an almost unlimited range of colors from translucent light pastels to black. Molded parts are free from odor; UV stable with good moisture resistance. Hard, glossy and scratch resistant surface. Excellent chemical resistance. Fats, oils and common organic solvents like alcohol and acetone do not attack molded parts which are also resistant to surfactants and weak bases. They will withstand attack from weak acids for a shorter duration. Excellent electrical properties (arc quenching, tracking, flame resistance). Oxygen index of 30% is achieved without the use of external flame retardants. No halogens are present in the composition.
BJB Enterprises
BJB Enterprises TC-1604-AB
Polymer Name:
Epoxy Resins & Compounds
Flexural Strength:
268.89 - 268.89 MPa
TC-1604 A/B is a filled, easy to apply, laminating epoxy resin for variety of fabricating applications. Designed to be used with heavier weight fiberglass cloth (typically 8-10 oz.tooling fabric),TC-1604 can produce thick laminates without excess draining of the resin. Being a very stable system with low shrinkage.
MARTE SpA
Ares® P308
Polymer Name:
Polydicyclopentadiene (PDCPD), Thermoset Polyester
Chemical Family:
Polyesters, Olefins
Ares P308 is extremely flexible resin with low styrene content and low exothermic peak.The cross-linked resin is soft and dry to the touch. It is particularly suitable for the production of abrasive cones suitable for abrading particularly fragile and delicate surfaces.
RECKLI
RECKLI Epoxy WST
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Thin Coatings
Epoxy WST is a liquid, transparent, solvent-free two-component epoxy resin with high compressive strength and dimensional stability under heat. It is wellcuring, even in thin layers.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh MG 703Z 400
Polymer Name:
Polyurethane (unspecified)
End Uses:
Modeling Material, Automotive Interior Parts, Consumer Applications, Automotive Applications, Automotive Exterior Parts
Density:
1100.0 - 1140.0 kg/m³
Tensile Strength:
35.0 - 45.0 MPa
Ebalta MG 703 / Z 400 is a 2-components polyurethane material, which is cured thermically and used for prototypes. The four mentioned formulations differ in being filled or non-filled and their mechanical properties. The B-components Z 400 (potlife 8-12 min.) and Z 460 (potlife 60-70 min.) are identical and can be mixed with each other to control the reactivity, e.g. potlife. These combinations of Z 400 and Z 460 comp. B can be made any way as long as the totally required quantity of comp. B is observed (for each system).
Austin Novel Materials
TEXALAN® 290A
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Extrusion, Injection Molding
End Uses:
Cables, Pipes, Film, Flexible Packaging, Belts & Belt Repair, Automotive Applications, Automotive Exterior Parts
Density:
1180.0 - 1220.0 kg/m³
Tensile Strength:
40.0 - 40.0 MPa
TEXALAN® 290A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits High utilization rate, high strength and excellent processing performance
MARTE SpA
Ares® P805
Polymer Name:
Polydicyclopentadiene (PDCPD), Thermoset Polyester
Chemical Family:
Polyesters, Olefins
Ares P805 is DCPD resin with high reactivity. Low styrene content, and excellent dimensional stability. Excellent mechanical characteristics and wettability of the fillers. Ideal for fast processing cycles.
Hapco Inc.
Di-Pak™ E-4651
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4600 SERIESFlexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Available in flame retardant (FR), 3 minute (-3) gel time, and in black or unpigmented.
Orgi Chemie
OCPOL 701
End Uses:
Tanks
Cure Method:
Chemical Cure
Density:
1100.0 - 1110.0 kg/m³
Ocpol 701 is a clear Pre-Accelerated orthophthalic unsaturated polyester resin. It is highly water resistance. Due to its outstanding stability and excellent performance it is use in boats water tanks, bath tubs shower tub etc.
Sino Polymer
Sino Polymer MERICAN 9709
Processing Methods:
Filament Winding, Hand Lay-Up, Pultrusion
End Uses:
Tanks, Pipes
BCC Products
BCC Resins™ BC 8009
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Prototyping
BCC Slo-Kast is a low viscosity, medium setting, easy to use casting material. This polyurethane system features extremely low shrinkage when properly cured. Unlike Kwik-Kast, BC 8009 offers the user longer working time (15 minutes for filling closed mold cavities and up to 25 minutes when casting into open molds). Slo-Kast is ideal for casting large sections without having to stage pour. Uses included; tracing models, core boxes, keller aids, patterns, core sticks, vacuum form tools, prototypes and display parts.Handling Properties:BCC's Slo-Kast is a moderately fast-setting, two part casting system (Part A & Part B). If settling from long storage has occurred, re-mix contents of each container on a mechanical paint shaker, jiffy mixer, or other suitable mixing equipment. Precaution should be taken to prevent any moisture contamination. Use dry equipment and containers and keep covered when not in use. It is recommended that the work area be well ventilated and normal cleanliness and safety rules be observed. Avoid prolonged exposure to vapors and contact with skin.Preparation of Mold Surface:Clean the surface from dust and possible presence of moisture. Apply BC 87 Parting Agent and polish to a uniform high gloss finish (usually 2-3 coats are recommended). For plaster or wood surfaces seal with PVC sealer to ensure complete absence of moisture followed by 2-3 coats of 87 Parting Agent.Mixing and Pouring:Pour weighed or measured amounts of Part A & B into a separate dry container by pouring Part A into Part B. Mix with a spatula or mechanical stirrer for 1 minute for quart size batches or 2 minutes for gallon batches. After mixing both parts allow container to sit undisturbed 3-4 minutes before pouring. This "induction time" will result in superior surface qualities of the cast piece. Pour mixed resin uninterrupted from a convenient height above the mold cavity to resist air bubble entrapment. Clean your mixing tools by rinsing in an alcohol type solvent. Larger masses (2 feet or more) may be built up with successive pours. Castings may be demolded in as little as 3.5-4 hours, but should be properly supported while "green". If partially cured casting is disturbed, a surface film may result. This is easily removed by wiping with mineral spirits or lacquer thinner. Under normal conditions, maximum hardness or cure will be achieved in 24-48 hours.
Smooth On
Smooth-Cast™ 305
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Jewelry, Modeling Material, Prototyping
Density:
1050.0 - 1050.0 kg/m³
Tensile Strength:
20.67 - 20.67 MPa
Smooth-Cast™ 305 is ultra-low viscosity casting resins that yield castings that are bright white and virtually bubble free. Vacuum degassing is not necessary. They offer the convenience of a 1A:1B by volume or 100A:90B by weight mix ratio. The differences between them are pot life and demold time.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh SG 2000 SComp. A+B
Polymer Name:
Polyurethane (unspecified)
End Uses:
Tooling, Power/Other Tools, Molds/Dies/Tools, Foundry Dressings, Modeling Material, Mold Making, Industrial Castings
Density:
1080.0 - 1120.0 kg/m³
The product group ebalta SG 2000 consists of high-quality, nearly odorless two-component-Polyurethane casting resins without mixed in filler. The filler is stirred in when the components are mixed. There are different resin components available, which are processed with one hardener. The single types differ in potlife and curing time.
Sumitomo Bakelite Company
Durez™ 31735
Polymer Name:
Phenol Formaldehyde (PF), Phenolic Compound
Processing Methods:
Transfer Molding, Compression Molding
End Uses:
Automotive Applications
Density:
1430.0 - 1430.0 kg/m³
Tensile Strength:
52.0 - 52.0 MPa
Durez™ 31735 by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used It is available in Granules form.
Duresco
Duresco NU 505 L
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Transfer Molding, Injection Molding
End Uses:
Pump Parts, Switches, Housings, Pumps
Volume Resistivity:
10000000000000.0 - 10000000000000.0 Ohm-m
Flexural Strength:
100.0 - 100.0 MPa
Duresco NU 505 L is a Mineral filled epoxy molding compound with high temperature resistance and very good dimensional stability. Low and isotropic thermal expansion.
Poliya Composites and Polymers
Polipol 3813
Polymer Name:
Thermoset Polyester
Processing Methods:
Casting, Pultrusion
End Uses:
Industrial Castings, Kitchenware, Flooring, Synthetic Marble, Counter Top Flatstocks
Density:
1096.0 - 1096.0 kg/m³
Polipol 3813 is an iso/NPG based unsaturated polyester resin with medium reactivity and viscosity designed for solid surface filled casting applications. It is suitable for the production of solid surface products with excellent strength and esthetic properties. The main areas of use are the production of hygienic materials such as kitchen / fast food counters and sinks suitable for food contact. Interior architecture. It is used in decoration and wherever a natural granite look is desired.
MARTE SpA
Ares® P255
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE), Isophthalics
Ares P255 is an ISO / NPG resin with good resistance to water and not very aggressive chemical agents. Characterized by low shrinkage and good mechanical properties. Ideal for solid surface applications. Available in the modified acrylic version.
Telene
Telene® 1650 A/BK
Polymer Name:
Polydicyclopentadiene (PDCPD)
Processing Methods:
Injection Molding, Reaction Injection Molding (RIM)
End Uses:
Fenders, Automotive Under The Hood, Engine Covers, Automotive Bumpers, Automotive Exterior Parts
Telene® 1650 A/BK technology utilizes ring opening metathesis polymerization (ROMP). Formulations are based on dicyclopentadiene (DCPD) and engineered to produce polydicyclopentadiene polymer (PDCPD), well-known for its robust mechanical properties at low temperatures, its low water absorption, and its radio transparency.
Chemiplastica
Urochem 162
Polymer Name:
Urea Formaldehyde Resin (UF)
Processing Methods:
Injection Molding
End Uses:
Housings, Appliances, Electrical Components, Cable Jacketing
Density:
1500.0 - 1500.0 kg/m³
Tensile Strength:
45.0 - 45.0 MPa
Urochem 162 Molding Compounds can be supplied in an almost unlimited range of colors from translucent light pastels to black. Hard, glossy and scratch resistant surface. Excellent chemical resistance. Fats, oils and common organic solvents like alcohol and acetone do not attack molded parts which are also resistant to surfactants and weak bases. They will withstand attack from weak acids for a shorter duration. Excellent electrical properties (arc quenching, tracking, flame resistance). Oxygen index of 30% is achieved without the use of external flame retardants. No halogens are present in the composition.
Hapco Inc.
Ultralloy™ 3310
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting, Vacuum Casting
End Uses:
Prototyping, Agricultural Applications, Housings, Toys
The ULTRALLOY series of liquid molding compounds are tough, fast cycling, low cost, and easy to use. ULTRALLOY is designed to be used with Liquid Molding, open casting, pressure casting, or vacuum casting processes. ULTRALLOY can be used with silicone, epoxy, urethane, polyester, or aluminum molds. Low cost molds and fast cycle times are two key attributes of ULTRALLOY.ULTRALLOY is available in several series. Each series has different products with different physical properties. Properties such as elongation, tensile strength, and modulus of elasticity can be selected to mold parts with the correct physical characteristics. Choose the ULTRALLOY material with the exact properties you need, or that are required to meet specifications.ULTRALLOY is available in opaque white, clear/transparent, and in fire retardant (UL 94V-0) versions. Custom coloring can be achieved by pigmenting ULTRALLOY with Hapco's easy to mix color dispersions. Both opaque and translucent color dispersions are available.ULTRALLOY can be molded in inexpensive molds, reducing total part cost, for short run programs.ULTRALLOY is made for prototypes and short runs of plastic parts. ULTRALLOY fills the need for low cost, high performance parts, in volumes less than 10,000 parts per year.ULTRALLOY 3300 SERIESA series of flame retardant, (UL 94V-0) high strength, systems with excellent physical properties. This series can be pressure or vacuum cast. Underwriter Labs Flame Retardant 94V-0 @ 2.5 mm thickness. This series is available in a 2, 4, 14, and 28 minute gel time.
DUGALAK
DEPOL P-150PTA
Polymer Name:
Thermoset Polyester
Processing Methods:
Hand Lay-Up
End Uses:
Bathroom Accessories, Marine Applications, General Purpose, Roof Panels
DEPOL P-150PTA is a waterproof, medium-reactive, pre-accelerated, thixotropic, unsaturated, orthophtalic based polyester resin.
Globe Composite Solutions, Ltd
Brandonite® 1100-80D
Polymer Name:
Polyurethane (unspecified)
Tensile Strength:
65.455 - 65.455 MPa
Brandonite® 1100-80D contains features such as clear & excellent mechanical properties.
Show
36
of 922 results
Go to page
1
2
3
4
5
6
7
8
9
10