Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Thermoset Resins
Products in Thermoset Resins
922 Products found in Thermoset Resins
Browse
Applications
Show All 5 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Austin Novel Materials
TEXALAN® 285A
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Extrusion, Injection Molding
End Uses:
Cables, Pipes, Film, Flexible Packaging, Belts & Belt Repair, Automotive Applications, Automotive Exterior Parts
Density:
1180.0 - 1220.0 kg/m³
Tensile Strength:
35.0 - 35.0 MPa
TEXALAN® 285A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feel, repeated benefits High utilization rate, high strength and excellent processing performance
Globe Composite Solutions, Ltd
Brandonite® 1011-85D
Polymer Name:
Polyurethane (unspecified)
Tensile Strength:
68.9 - 68.9 MPa
Brandonite® 1011-85D contains features such as outstanding rigidity & flame Retardancy.
BJB Enterprises
BJB Enterprises TC-1651-AB
Polymer Name:
Epoxy Resins & Compounds
Flexural Strength:
73.08 - 73.08 MPa
TC-1651 A/B is an aluminum powder filled epoxy casting resin system that provides service temperatures in the range of 340F (171C). TC-1651 is most commonly used for the construction of molds that require good heat conductivity, outstanding durability, and that provides production run capability.
HK Research
HK Research R0059
Polymer Name:
Thermoset Polyester
Processing Methods:
Casting
End Uses:
Synthetic Marble, Counter Top Flatstocks
Cure Method:
Chemical Cure
Density:
1080.0 - 1080.0 kg/m³
HK Research R0059 is a resilient, light stabilized void free polyester casting resin.
Raschig
RALUPOL® UP 2200
Polymer Name:
Thermoset Polyester
Processing Methods:
Injection Molding
End Uses:
Fittings
Density:
1900.0 - 2100.0 kg/m³
RALUPOL® UP 2200 molding compounds are characterized by excellent dimensional stability with very low processing and post-shrinkage. Due to their high rigidity and excellent heat resistance, RALUPOL® products withstand short-term heat loads. They have excellent electrical insulation and dielectric properties, which are retained even with long-term use at high temperatures. The reason for this is high tracking resistance (CTI> 600 V), arc resistance, glow wire test (GWFI 960 ° C) and a high electrical RTI (relative temperature index) of 170 ° C according to UL 746 (IEC 60216 / T1).
Ingenia Polymers
Superlink™ 110
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Rotational Molding
End Uses:
Door Profiles, Sporting Goods, Profiles, Heavy Duty Bags, Fuel Tanks, Industrial Tanks
Density:
942.0 - 942.0 kg/m³
Superlink™ 110 is developed by Ingenia for the manufacture of parts to offer a unique combination of high stiffness, low temperature impact properties and excellent ESCR performance. Superlink 110 is UV stabilized for extended outdoor service and is available in natural, black and customer-specified colors. Superlink 110 in various colors will retain at least 80% of each nominal property given below for the natural compound.
Sumitomo Bakelite Company
Durez™ 29502 B
Polymer Name:
Phenol Formaldehyde (PF), Phenolic Compound
Processing Methods:
Compression Molding
End Uses:
Automotive Applications
Density:
2100.0 - 2100.0 kg/m³
Tensile Strength:
65.0 - 65.0 MPa
Durez™ 29502 B by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used It is available in Granules form.
Saudi Industrial Resins
Siropol 992 FRA
Polymer Name:
Vinyl Ester Resin
Processing Methods:
Spray Lay-Up, Filament Winding, Hand Lay-Up
End Uses:
Tanks, Pipes
Cure Method:
Chemical Cure
SIROPOL 992 FRA resin is a medium viscosity, unpromoted flame retardant vinylester-based resin. Laminates made with SIROPOL 992 FRA resin have achieved Flame retardancy BS476: Part 7:1997 Class I rating and Flame retardancy ASTM E-84 Class I rating as 3% antimony trioxide is added.
Sumitomo Bakelite Company
Durez™ SUMIKON PM-9640
Polymer Name:
Phenol Formaldehyde (PF), Phenolic Compound
Processing Methods:
Transfer Molding, Injection Molding
End Uses:
Automotive Applications
Density:
1780.0 - 1780.0 kg/m³
Tensile Strength:
138.0 - 138.0 MPa
Durez™ SUMIKON PM-9640 by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used Durez™ SUMIKON PM-9640 is certified as UL Flame Rated. It is available in Granules form.
Telene
Telene® 1811 A/B
Polymer Name:
Polydicyclopentadiene (PDCPD)
Processing Methods:
Injection Molding, Reaction Injection Molding (RIM)
End Uses:
Fenders, Automotive Under The Hood, Engine Covers, Automotive Bumpers, Automotive Exterior Parts
Telene® 1811 A/B technology utilizes ring opening metathesis polymerization (ROMP). Formulations are based on dicyclopentadiene (DCPD) and engineered to produce polydicyclopentadiene polymer (PDCPD), well-known for its robust mechanical properties at low temperatures, its low water absorption, and its radio transparency. This system has been designed for hand cast parts.
Saudi Industrial Resins
Siropol 8339
Processing Methods:
Laminating, Casting
End Uses:
Consumer Applications, Bathroom Accessories, Tanks
Cure Method:
Chemical Cure
Density:
1020.0 - 1060.0 kg/m³
Siropol 8339 resin is medium viscosity, medium reactivity, general purpose, unsaturated polyester resin. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food subject to user’s compliance with the prescribed limitations of that regulation.
Kemrock Industries and Exports
Kemrock Industries and Exports KPR 6460
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Density:
1110.0 - 1110.0 kg/m³
KPR 6460 by Kemrock Industries and Exports is a dicyclopentadiene (DCPD) based orthophthalate unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6460 is recommended for FRP composites.
BIP (Oldbury) Ltd.
Beetafin™ BF2820
Polymer Name:
Polyester (unspecified), Polyurethane (MDI-based)
Processing Methods:
Lamination
Beetafin™ BF2820 is a water based Polyurethane emulsion having excellent compatibility with most common water-based systems. The product is suitable for application to a variety of substrates where high quality and longevity are prime requirements.
Sino Polymer
Sino Polymer MERICAN 960
Polymer Name:
Vinyl Ester Resin
End Uses:
Containers
BIP (Oldbury) Ltd.
Beetafin™ BF2819
Polymer Name:
Polyester (unspecified), Polyurethane (MDI-based)
Beetafin™ BF2819 is a water based Polyurethane emulsion having excellent compatibility with most common water-based systems. The product is suitable for application to a variety of substrates where high quality and longevity are prime requirements.
Fudow Company
Fudow Company F5980F
Polymer Name:
Phenol Formaldehyde (PF)
Processing Methods:
Transfer Molding, Injection Molding, Compression Molding
End Uses:
Automotive Components, Switches, Electrical/Electronic Applications, Automotive Interior Parts, Bobbins, Relay Bases, Automotive Electronics, Automotive Applications
Fudow Company F5980F is inorganic filler.
BCC Products
BCC Resins™ BC 6126
Polymer Name:
Epoxy Resins & Compounds
BC 6126 is a gray, low toxicity, aluminum filled, epoxy surface coat. This thixotropic resin system provides excellent surface duplication along with vertical coverage to 1/16" thickness. This heat resistant system may be used at room temperature without post-curing. For use above 150°F a post-cure is required. Post cure for applications requiring temperatures above 150°F can be accomplished in an oven or in use by a gradual heat rise; 2 hours @ 150°F, plus 2 hours @ 250°F, plus 2 hours at 300°F. BC 6126 can afford consistent use to 300°F if required. BC 6126 was engineered to replace VCHD and MDA systems while retaining excellent heat resistance. Typical uses include constructing vacuum form tools, Injection and compression molds, RTM and RIM molds, and matched dies.
BJB Enterprises
BJB Enterprises TC-1622-AB
Polymer Name:
Epoxy Resins & Compounds
Chemical Family:
Epoxy & Epoxy Derivatives
Processing Methods:
Vacuum Assisted Resin Transfer Molding (VARTM)
TC-1622 A/B is an unfilled laminating resin for high temperature mold and part fabricationformulated to provide superior wet-out and adhesion to a variety of substrates. It is agreat material for Vacuum Assisted Resin Transfer Molding (VARTM) as well as other wet lay-up methods due to its low viscosity and long working time. When properly cured TC-1622 A/B can be used up to350°F (177°C).
Micropol
Microlin XL28
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Rotational Molding
End Uses:
Pipes
Density:
940.0 - 940.0 kg/m³
Microlin XL28 is a chemically crosslinkable polyethylene which produces a finished molding of improved properties with the use of conventional rotational molding equipment. Properties enhanced include toughness (particularly low-temperature impact performance), environmental stress crack resistance, chemical and temperature resistance. Typical uses of this material include fuel tanks, urea tanks and stretchers where the rigidity of longer moldings is critical.
Hapco Inc.
Di-Pak™ E-4889
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4888 & E-4889High performance, flexible potting systems designed to be in constant water immersion while maintaining electrical and physical properties. DI-PAK E-4888 & E-4889 were designed to meet Naval underwater applications.
Chemiplastica
Urochem 371
Polymer Name:
Urea Formaldehyde Resin (UF)
Processing Methods:
Injection Molding
End Uses:
Toilet Seats, Housings, Closures, Appliances, Electrical Components, Cosmetic Packaging, Caps, Cable Jacketing
Density:
1500.0 - 1500.0 kg/m³
Tensile Strength:
45.0 - 45.0 MPa
Urochem 371 Molding Compounds can be supplied in an almost unlimited range of colors from translucent light pastels to black. Molded parts are free from odor; UV stable with good moisture resistance. Hard, glossy and scratch resistant surface. Excellent chemical resistance. Fats, oils and common organic solvents like alcohol and acetone do not attack molded parts which are also resistant to surfactants and weak bases. They will withstand attack from weak acids for a shorter duration. Excellent electrical properties (arc quenching, tracking, flame resistance). Oxygen index of 30% is achieved without the use of external flame retardants. No halogens are present in the composition.
Austin Novel Materials
TEXALAN® 360A
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Extrusion, Injection Molding
End Uses:
Cables, Pipes, Film, Flexible Packaging, Belts & Belt Repair, Automotive Applications, Automotive Exterior Parts
Density:
1190.0 - 1190.0 kg/m³
Tensile Strength:
20.0 - 20.0 MPa
Texalan® 360A product has excellent processing properties, oil/solvent resistance, low temperature flexural resistance, high resilience, and flexibility.
Globe Composite Solutions, Ltd
Brandonite® 1000-40D
Polymer Name:
Polyurethane (unspecified)
Tensile Strength:
31.005 - 31.005 MPa
Brandonite® 1000-40D contains features such as Execellent acoustics properties.
Hapco Inc.
Ultralloy™ 206
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting, Vacuum Casting
End Uses:
Prototyping, Agricultural Applications, Housings, Toys
The ULTRALLOY series of liquid molding compounds are tough, fast cycling, low cost, and easy to use. ULTRALLOY is designed to be used with Liquid Molding, open casting, pressure casting, or vacuum casting processes. ULTRALLOY can be used with silicone, epoxy, urethane, polyester, or aluminum molds. Low cost molds and fast cycle times are two key attributes of ULTRALLOY.ULTRALLOY is available in several series. Each series has different products with different physical properties. Properties such as elongation, tensile strength, and modulus of elasticity can be selected to mold parts with the correct physical characteristics. Choose the ULTRALLOY material with the exact properties you need, or that are required to meet specifications.ULTRALLOY is available in opaque white, clear/transparent, and in fire retardant (UL 94V-0) versions. Custom coloring can be achieved by pigmenting ULTRALLOY with Hapco's easy to mix color dispersions. Both opaque and translucent color dispersions are available.ULTRALLOY can be molded in inexpensive molds, reducing total part cost, for short run programs.ULTRALLOY is made for prototypes and short runs of plastic parts. ULTRALLOY fills the need for low cost, high performance parts, in volumes less than 10,000 parts per year.ULTRALLOY 200 SERIESA series of general purpose Liquid Molding Compounds that do not change color and remain clear/ light yellow when cured. Ultralloy 200 Series are ideal for in mold coloring of parts. They can be easily pigmented and the color remains the same in the cured or liquid state. Tensile strengths from 10,300 psi to 11,800 psi are available.
Smooth On
Smooth-Cast™ 322
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Modeling Material, Dental Applications, Prototyping, Body Implants, Jewelry
Density:
1050.0 - 1050.0 kg/m³
Tensile Strength:
20.67 - 20.67 MPa
Smooth-Cast™ 322 consists of ultra-low viscosity casting resins that yield virtually bubble-free off-white castings. The Smooth-Cast™ 320 resins are sister products to our popular Smooth-Cast™ 300 Series of bright white plastics, but are easier to color using SO-Strong™, UVO™ or Ignite™ color tints. Smooth-Cast™ 320 series is easy to mix and pour, offering the convenience of a 1A:1B by volume or 100A : 90B by weight mix ratio.
Vikram Resins and Polymers
Vikram Resins and Polymers VRP 2112
Processing Methods:
Resin Transfer Molding, Hand Lay-Up
Cure Method:
Chemical Cure
Density:
1120.0 - 1120.0 kg/m³
Vikram Resins and Polymers VRP 2112 is a medium reactive superior grade Orthophthalic Acid based Unsaturated Polyester Resin. It has low viscosity, good wetting, good mechanical properties, and is fast curing. VRP 2112 is suitable for hand lay-up, RTM, and other molding applications and can be supplied as a pre-accelerated, thixotropic, or low viscosity resin.
Hapco Inc.
Di-Pak™ R-4242
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
RIGIDDI-PAK R-4242/4243Low cost, fast set potting compounds with excellent properties and FAST TURNOVER. R-4242/4243 are 1:1 by weight or volume, making them ideal for hand pour or automatic metering systems.
HK Research
HK Research R0217
Polymer Name:
Thermoset Polyester
Processing Methods:
Casting
End Uses:
Synthetic Marble, Counter Top Flatstocks
Cure Method:
Chemical Cure
Density:
1110.0 - 1110.0 kg/m³
HK Research R0217 is a resilient, light stabilized void free polyester casting resin.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh MG 321 FRComp. A+B
Polymer Name:
Polyurethane (unspecified)
End Uses:
Electronic Data Processing, Automotive Interior Parts, Automotive Exterior Parts, Medical/Healthcare Applications, Medical Devices
Density:
1170.0 - 1230.0 kg/m³
ebalta MG 321 FR is processed on a two-component low pressure device. After grinding with a sand paper , grit 280, the surface can be varnished with a commercial lacquer. For better adhesion we recommend the use of a primer coat. Nitrocellulose lacquers have a better adhesion on polyurethane surfaces than on acryllacquer- systems. As release agent you can use our T 03-01. MG 321 FR beige fire behavior according to UL 94, 3 mm thickness V0 With MG 883 the potlife of MG 321 FR beige can be set up to 120 secs. MG 321 FR-S beige/ black - Approved according to UL 94 - File E191776 Vol. 1 fire behavior based on UL 94, 3 mm thickness V0 and 5VA
Kemrock Industries and Exports
Kemrock Industries and Exports KPR 6430
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Density:
1130.0 - 1130.0 kg/m³
KPR 6430 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6430 is suitable for processing by sheet and dough molding (SMC/DMC). Recommended for FRP composites.
Rampf Group
RAKU® TOOL EL-2200
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Vacuum Casting, Laminating, Compression Molding, Hand Lay-Up
End Uses:
Prototyping, Mold Making
RAKU® TOOL EL-2200 is a multipurpose, laminating and back filling resin with a viscosity of 1000–1300 mPas.
Saudi Industrial Resins
Siropol 8341
Processing Methods:
Laminating, Casting
End Uses:
Consumer Applications, Bathroom Accessories, Tanks
Cure Method:
Chemical Cure
Density:
1020.0 - 1060.0 kg/m³
Siropol 8341 resin is medium viscosity, medium reactivity, general purpose, unsaturated polyester resin. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food subject to user’s compliance with the prescribed limitations of that regulation.
Amroy Europe Oy
Hybtonite® CA35
Polymer Name:
Epoxy Resins & Compounds
Chemical Family:
Epoxy & Epoxy Derivatives
Reinforcement Material:
Other Reinforcement Material, Carbon Fibers
End Uses:
Marine Applications, Automotive Applications, Industrial Applications
Hybtonite® CA35, CNT modified epoxy resin. It is a low viscosity, solvent free 100 % reactive resin. The system will give increased impact resistance, elongation to break and fatigue compared to any traditional epoxies. It also attaches functional chemical groups covalently to the CNTs. When epoxy resin is cured, these functional groups take part in the polymerization process creating a strong hybrid structure between matrix and CNTs. Due to that nanocarbonepoxy resins possess revolutionary properties compared to the standard epoxy resins. Providing the outstanding performance in numerous composite as well as non-composite bonding applications, nanocarbonepoxy Hybtonite offers ease of use, durability and a consistently high quality. Can be used in marine, automotive industry and in many other industrial applications.
Micropol
Isoplas P471
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Pipes
Density:
945.0 - 945.0 kg/m³
Isoplas P471 has been developed for use in alupex pipes.
Hapco Inc.
Di-Pak™ E-4501
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4501 Easily pourable, thermally conductive, shock resistant potting compounds that are ideally suited for low and high production applications. This series of DI-PAK products reduce rejects by exhibiting extremely low stress on potted components. All three of the above DI-PAK E products are flame retardant and meet UL 94V-0 requirements.
Shanghai Sanzheng Polymer Material
Shanghai Sanzheng Polymer Material Silane Cross-Linkable PE Compound 4251
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Shanghai Sanzheng Polymer Material Silane Cross-Linkable PE Compound 4251 is silane XLPE compound with monosil method (one step) and is specially used for 1KV and below cable & wire. It has outstanding performance in processing temperature, easy processing characteristics and excellent product properties.
Show
36
of 922 results
Go to page
1
2
3
4
5
6
7
8
9
10