Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Thermoset Resins
Products in Thermoset Resins
922 Products found in Thermoset Resins
Browse
Applications
Show All 5 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Poliya Composites and Polymers
Polipol 383-G
Polymer Name:
Thermoset Polyester
Processing Methods:
Casting
End Uses:
Kitchenware, Flooring, Synthetic Marble, Counter Top Flatstocks, Industrial Castings
Density:
1076.0 - 1076.0 kg/m³
Polipol 383-G is an isophthalic/NPG based, acrylic modified, medium reactivity and viscosity, solid surface type unsaturated polyester resin with solid surface filling. It is suitable for the production of solid surface products with its excellent UV resistance, high strength and esthetic properties. The main areas of use are the production of hygienic materials such as kitchen / fast food counters and sinks suitable for food contact. Inner It is used in architecture and decoration, wherever a natural granite look is desired.
BCC Products
BCC Resins™ BC 8645
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Prototyping
BCC Kwik Kast/Gray is a two component, fast setting polyurethane reproduction plastic. BC 8645 sets to a demoldable hardness within 30 minutes @ 77°F. Uses include; tracing models, core boxes, duplicating aids, patterns, prototypes, low temperature vacuum form tools, etc..
Hapco Inc.
Tuffalloy™ 4274
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting, Vacuum Casting
End Uses:
Tubing, Interlock Tubes, Automotive Under The Hood, Snap-On Clip, Prototyping, Housings, Closures, Gears, Cosmetic Packaging, Insert Molded Fan, Engine Covers
TUFFALLOY 4270 is a series of Liquid Molding Compounds with thermoplastic properties such as high impact, high heat distortion, and low viscosity. This unique chemistry developed by Hapco to meet today's market demands for prototype and low production parts needs.THE TUFFALLOY 4270 Series are available in (4) speeds.The user has the ability to use different speeds of TUFFALLOY 4270, typically using a slower speed initially and increasing to a fast set, 1 minute working life.PROCESSING: TUFFALLOY 4270 Series can be pressure cast, vacuum cast, or open cast. For best results, TUFFALLOY 4274/75 should be used with Hapco's metering/dispensing equipment, RAPIDFIL, MINI FIL, and RAPIDSHOT.
BJB Enterprises
BJB Enterprises TC-1651-AB
Polymer Name:
Epoxy Resins & Compounds
Flexural Strength:
73.08 - 73.08 MPa
TC-1651 A/B is an aluminum powder filled epoxy casting resin system that provides service temperatures in the range of 340F (171C). TC-1651 is most commonly used for the construction of molds that require good heat conductivity, outstanding durability, and that provides production run capability.
Hapco Inc.
Tuffalloy™ 4270
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting, Vacuum Casting
End Uses:
Tubing, Interlock Tubes, Automotive Under The Hood, Snap-On Clip, Prototyping, Housings, Closures, Gears, Cosmetic Packaging, Insert Molded Fan, Engine Covers
TUFFALLOY 4270 is a series of Liquid Molding Compounds with thermoplastic properties such as high impact, high heat distortion, and low viscosity. This unique chemistry developed by Hapco to meet today's market demands for prototype and low production parts needs.THE TUFFALLOY 4270 Series are available in (4) speeds.The user has the ability to use different speeds of TUFFALLOY 4270, typically using a slower speed initially and increasing to a fast set, 1 minute working life.PROCESSING: TUFFALLOY 4270 Series can be pressure cast, vacuum cast, or open cast. For best results, TUFFALLOY 4274/75 should be used with Hapco's metering/dispensing equipment, RAPIDFIL, MINI FIL, and RAPIDSHOT.
Austin Novel Materials
TEXALAN® 285A
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Extrusion, Injection Molding
End Uses:
Cables, Pipes, Film, Flexible Packaging, Belts & Belt Repair, Automotive Applications, Automotive Exterior Parts
Density:
1180.0 - 1220.0 kg/m³
Tensile Strength:
35.0 - 35.0 MPa
TEXALAN® 285A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feel, repeated benefits High utilization rate, high strength and excellent processing performance
Sino Polymer
Sino Polymer MFE 707A
Polymer Name:
Vinyl Ester Resin
Processing Methods:
Filament Winding, Hand Lay-Up, Pultrusion, Resin Transfer Molding, Spray Lay-Up
Shanghai Sanzheng Polymer Material
Shanghai Sanzheng Polymer Material Low Shrinkage Silane Cross-Linkable PE Compound 4244-E
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Shanghai Sanzheng Polymer Material Low Shrinkage Silane Cross-Linkable PE Compound 4244-E is suitable for 1kv and below low voltage cable, it is composed by 95% silane crosslinkable low density polyethylene (compound A) and 5% catalyst (compound B). The main raw materials of the product are imported high-quality LDPE and silane crosslink agent.
MARTE SpA
Ares® P807
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters
Processing Methods:
Spray Lay-Up
Ares P807 is resin for reinforcing bathtubs and shower trays, excellent adhesion to ABS, good loadability and compatibility with glass fibers. Excellent dimensional stability. Also ideal for spray up processing. Low emission version (LSE) available.
Micropol
Isoplas P651
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Pipes
Density:
960.0 - 960.0 kg/m³
Isoplas P651 is used for rigid pipes for water transport, and for general purpose use.
Saudi Industrial Resins
Siropol 8340-TPWH
Processing Methods:
Laminating, Casting
End Uses:
Consumer Applications, Bathroom Accessories, Tanks
Cure Method:
Chemical Cure
Siropol 8340-TPWH is an orthophthalic, low reactivity, thixotropic, pre accelerated, medium viscosity, general purpose, unsaturated polyester resin. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food subject to user’s compliance with the prescribed limitations of that regulation.
Sumitomo Bakelite Company
Durez™ 00153
Polymer Name:
Phenol Formaldehyde (PF), Phenolic Compound
Processing Methods:
Transfer Molding, Injection Molding, Compression Molding
End Uses:
Electrical/Electronic Applications
Density:
1500.0 - 1500.0 kg/m³
Tensile Strength:
62.0 - 62.0 MPa
Durez™ 00153 by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used Durez™ 00153 is certified as UL Flame Rated. It is available in Granules form.
Nippon Pelnox
Nippon Pelnox MU-209A
Polymer Name:
Polyurethane (unspecified)
End Uses:
Automotive Electronics, Switches, Semiconductor Applications, Encapsulant
MU-209A Its functions are flexible, low stress, stress release, and shock absorption.
Swancor
SWANCOR 2207-A/B
Polymer Name:
Epoxy Resins & Compounds
Chemical Family:
Epoxy & Epoxy Derivatives
Processing Methods:
Pultrusion
SWANCOR 2207-A/B contains features such as moderate viscosity, good wettability to fibers, suitable for various pultruded profiles of glass fiber and carbon fiber. It has good operating time and reactivity, pulling speed up to 80cm/min with good temperature resistance.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh AH 110TGL
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Construction Applications, Textile Applications, General Purpose
Flexural Strength:
125.0 - 145.0 MPa
Ebalta AH 110 / TGL is an unfilled epoxy resin with high strength values and dimensional stability, even at increased temperature. It can be used as casting resin with powdered fillers as aluminum powder, laminating resin with glass fabric and binder with grainy fillers as aluminum granules. Depending on application the suitable hardener can be mixed with the resin. AH 110/TGL is suitable as laminating resin for big surfaces at a temperature range until 110 °C.
Globe Composite Solutions, Ltd
Brandonite® 1700-60D
Polymer Name:
Polyurethane (unspecified)
Tensile Strength:
56.498 - 56.498 MPa
Brandonite® 1700-60D contains features such as Outstanding mechanical properties.
Saudi Industrial Resins
Siropol 8340
Processing Methods:
Laminating, Casting
End Uses:
Consumer Applications, Bathroom Accessories, Tanks
Cure Method:
Chemical Cure
Siropol 8340 resin is medium viscosity, medium reactivity, general purpose, unsaturated polyester resin. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food subject to user’s compliance with the prescribed limitations of that regulation.
Crosslink Technology Inc.
Crosslink Technologies CLH5100
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Encapsulant, Electrical/Electronic Applications, Electrical Components
CLH5100 is a two component heat cured epoxy casting system. The cured product is suitable for outdoor applications. The product passes accelerated in-house ultraviolet testing without chalking. The product passes in-house ul 94-hb flammability testing.
Swancor
Swancor 2594
Applications:
Other Industrial Applications, Sports & Recreation, Medical Devices & Assemblies
Product Families:
Epoxies, Thermoset Resins, Polymers & Resins
Chemical Family:
Epoxy & Epoxy Derivatives
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Helmets
SWANCOR 2594 is a hot-melt epoxy resin and does not contain Diuron and volatile ingredients in the formula. Suitable for the rolling process, has good surface adhesion and spreadability, and is suitable for prepregs with low weight and low resin content.
Arlon Electronic Materials
Arlon® 44N
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Injection Molding
End Uses:
Automotive Under The Hood, Laminates, Electrical/Electronic Applications, Computer Components
Arlon 44N is a high resin content multifunctional (175°C) epoxy prepreg system with a proprietary micordisperse ceramic filler system. 44N is engineered for the filling of clearance holes in thin Metal cores such as 0.006" Copperinvar- Copper or via holes in sequentially laminated MLB designs. Based on Arlon's 45N, the 44N system is compatible with conventional epoxy lamination and fabrication.
Raschig
RALUPOL® UP 804
Polymer Name:
Thermoset Polyester
Processing Methods:
Injection Molding, Compression Molding
End Uses:
Appliances, Electrical Components
Density:
1000.0 - 2100.0 kg/m³
RALUPOL® UP 804 molding compounds are characterized by excellent dimensional stability with very low processing and post-shrinkage. Due to their high rigidity and excellent heat resistance, RALUPOL® products withstand short-term heat loads. They have excellent electrical insulation and dielectric properties, which are retained even with long-term use at high temperatures. The reason for this is high tracking resistance (CTI> 600 V), arc resistance, glow wire test (GWFI 960 ° C) and a high electrical RTI (relative temperature index) of 170 ° C according to UL 746 (IEC 60216 / T1).
Raschig
RALUPOL® UP 4566
Polymer Name:
Thermoset Polyester
Processing Methods:
Compression Molding
End Uses:
Lamp Sockets, Lighting Applications
Density:
2140.0 - 2200.0 kg/m³
RALUPOL® UP 4566 molding compounds are characterized by excellent dimensional stability with very low processing and post-shrinkage. Due to their high rigidity and excellent heat resistance, RALUPOL® products withstand short-term heat loads. They have excellent electrical insulation and dielectric properties, which are retained even with long-term use at high temperatures. The reason for this is high tracking resistance (CTI> 600 V), arc resistance, glow wire test (GWFI 960 ° C) and a high electrical RTI (relative temperature index) of 170 ° C according to UL 746 (IEC 60216 / T1).
Hapco Inc.
Sympoxy™ 1873
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Molds/Dies/Tools
A black epoxy system with a convenient 1:1 mix ratio by volume. This product has excellent machinability, good impact strength, and cures overnight at room temperature. It has very low shrinkage making it ideal for prototypes, models, dies, and cast production parts.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 986 1Comp. A+B
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Foundry Dressings
Density:
1080.0 - 1120.0 kg/m³
Tensile Strength:
30.0 - 40.0 MPa
GM 986-1 Comp. B (Amine) can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. This material is most suitable for high pressure molding plants with high molding pressure and temperature resistance. For application at 60°C Shore hardness D is between 60-62! The postcured material is not UV stable and darkens by and by. However according to our experience the change in color does not affect its utilizability. As bonding agent on aluminum support we recommend our PU coupling paste KP 8. The material is also dimensionally stable at high temperatures. At a mold temperature of approx. 60°C a Shore hardness D of 62-64 will still be reached. Due to remanent brittleness, for complicated geometries we recommend demoulding after 48 hrs. As bonding agent on aluminum support we recommend our PU coupling paste KP 8.
Hapco Inc.
Di-Pak™ E-4701
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4701, E-4951 and E-4501Easily pourable, thermally conductive, shock resistant potting compounds that are ideally suited for low and high production applications. This series of DI-PAK products reduce rejects by exhibiting extremely low stress on potted components. All three of the above DI-PAK E products are flame retardant and meet UL 94V-0 requirements.
MARTE SpA
Ares® P108
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Orthophthalics, Unsaturated Polyester (UPE)
Ares P108 is medium reactivity resin characterized by good mechanical resistance and excellent filler wettability.
BCC Products
BCC Resins™ BC 7009-2
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Prototyping
BC 7009-2 is an iron filled, low-cost mass casting system. Recommended for use in casting a minimum of two inches and a maximum of six inches in non-conductive molds. Thicknesses to nine inches in metal or conductive-type molds can be successfully achieved as well. Ideal for stretch forms, patterns, dies, molds, duplications, prototypes, etc.
Smooth On
Smooth-Cast™ 327
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Jewelry, Modeling Material, Prototyping
Density:
1070.0 - 1070.0 kg/m³
Tensile Strength:
21.8413 - 21.8413 MPa
Smooth-Cast™ 327 is fast-cast resin that were developed specifically for adding color pigments and fillers to achieve true color representation or filler effect. The ColorMatch™ Series is formulated “color neutral”. Small amounts of pigment will yield accurate, vivid colors from cured castings using So-Strong™, UVO™ or Ignite™ colorants. The ColorMatch™ Series offers the convenience of a 1A: 1B mix ratio by volume and has a very low viscosity. Demold times range from about 10 minutes to 2-4 hours (depending on product, mass and mold configuration). Note: Large mass castings will get very hot and shrink more, depending on mold configuration.
Hapco Inc.
Di-Pak™ E-4565-3
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4500 SERIESFlexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Flame retardant (FR), accelerated 3 minute (-3) gel time, and black or unpigmented versions are available.
DIC Corporation
Stelacoat™ FA-2500/FB-2500
Polymer Name:
Polyurethane (unspecified)
End Uses:
Flooring
PANDEX, WALL-LITE series are single-pack and twin-pack polyurethane resins developed for waterproofing of rooftops and walls and adhesion of rubber chips. The series characteristically excel in workability and hardening effects.
Raschig
RALUPOL® UP 2200
Polymer Name:
Thermoset Polyester
Processing Methods:
Injection Molding
End Uses:
Fittings
Density:
1900.0 - 2100.0 kg/m³
RALUPOL® UP 2200 molding compounds are characterized by excellent dimensional stability with very low processing and post-shrinkage. Due to their high rigidity and excellent heat resistance, RALUPOL® products withstand short-term heat loads. They have excellent electrical insulation and dielectric properties, which are retained even with long-term use at high temperatures. The reason for this is high tracking resistance (CTI> 600 V), arc resistance, glow wire test (GWFI 960 ° C) and a high electrical RTI (relative temperature index) of 170 ° C according to UL 746 (IEC 60216 / T1).
Hapco Inc.
Ultralloy™ 108 White
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Vacuum Casting, Casting
End Uses:
Toys, Prototyping, Agricultural Applications, Housings, General Purpose
The ULTRALLOY series of liquid molding compounds are tough, fast cycling, low cost, and easy to use. ULTRALLOY is designed to be used with Liquid Molding, open casting, pressure casting, or vacuum casting processes. ULTRALLOY can be used with silicone, epoxy, urethane, polyester, or aluminum molds. Low cost molds and fast cycle times are two key attributes of ULTRALLOY.ULTRALLOY is available in several series. Each series has different products with different physical properties. Properties such as elongation, tensile strength, and modulus of elasticity can be selected to mold parts with the correct physical characteristics. Choose the ULTRALLOY material with the exact properties you need, or that are required to meet specifications.ULTRALLOY is available in opaque white, clear/transparent, and in fire retardant (UL 94V-0) versions. Custom coloring can be achieved by pigmenting ULTRALLOY with Hapco's easy to mix color dispersions. Both opaque and translucent color dispersions are available.ULTRALLOY can be molded in inexpensive molds, reducing total part cost, for short run programs.ULTRALLOY is made for prototypes and short runs of plastic parts. ULTRALLOY fills the need for low cost, high performance parts, in volumes less than 10,000 parts per year.ULTRALLOY 100 SERIESA series of general purpose Liquid Molding Compounds. This product turns a natural white but is available pigmented white for extra brightness. Both versions are available in an 8.5 minute or 25 minute gel time.
DUGALAK
DEVINYL 950 TG
Polymer Name:
Vinyl Ester Resin
Processing Methods:
Spray Lay-Up, Hand Lay-Up, Resin Transfer Molding
End Uses:
Containers, Automotive Interior Trim, Air Ducts
Devinyl 950 TG is a high-quality fire retardant, non pre-accelerated, brominated epoxy vinyl ester resin. It is designed for hand lay up molding as well as for spray application. RTM-technologies, for winding production using continuous and periodical method.
BCC Products
BCC Resins™ BC 8007-2
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Modeling Material
BCC Lik-Wood/Slo is a low viscosity, quick setting, easy to use casting material. A model or tool cast from Lik-Wood/Slo will weigh 60% less than other filled urethane systems. Within 1 to 3 hours after mixing and pouring, Lik-Wood/Slo is ready to be carved, sanded, filed, tapped, etc.. Its amazing wood-like characteristics make it ideal for light-weight backing of laminates and/or surface coats. Perfect for fast take offs, cores, engineering changes, temporary molds, patterns, models, prototypes, and bases for die models.Handling Properties:BCC's Lik-Wood/Slo is a quick-setting, two part casting system which requires careful preparation prior to mixing parts A and B. Because Lik-Wood/Slo contains components having very low density there will be some separation at the surface of the material in its container. Using a paint shaker, jiffy mixer, or mixing spatula, re-suspension of the ingredients is easily accomplished. Precaution should be taken to prevent any moisture contamination from containers or utensils. It is recommended that the work area be well ventilated and normal cleanliness and safety rules be observed. Avoid prolonged exposure to vapors and contact with skin.Preparation of Mold Surface:Clean the surface from dust and possible presence of moisture. Apply BC 87 Parting Agent and polish to a uniform high gloss finish (usually 2-3 coats are recommended). For wood surfaces, 2-3 coats of a high quality sanding sealer is necessary. For plaster surfaces, seal with PVC sealer to ensure complete absence of moisture. For both wood and plaster surfaces, follow with 2-3 coats of 87 Parting Agent.Mixing and Pouring:Pour weighed or measured amounts of Part A & B into a separate dry container by pouring Part A into Part B. Mix with a spatula or mechanical stirrer for 30-40 seconds for quart size batches or 40-50 seconds for gallon batches while avoiding air entrapment. Immediately pour mixed resin uninterrupted from a convenient height above the mold cavity to resist air bubble entrapment. Clean your mixing tools by rinsing in an alcohol type solvent. Larger masses (2 feet or more) may be built up with successive pours. Castings may be demolded within 30-60 minutes but should be properly supported while "green". Under normal conditions, maximum hardness or cure will be achieved in 12-18 hours.
Lucobit AG
Lucobit® 1210
Polymer Name:
Polyethylene Copolymer
Processing Methods:
Profile Extrusion, Film Extrusion, Injection Molding, Coating
End Uses:
Construction Applications, Roofing Membranes
Density:
970.0 - 970.0 kg/m³
Lucobit® 1210 by Lucobit AG is comprised of Crosslinkable Polyethylene and Polyethylene Copolymer. It is commonly used It is available in Granules form.
MARTE SpA
Ares® P808
Polymer Name:
Polydicyclopentadiene (PDCPD), Thermoset Polyester
Chemical Family:
Polyesters, Olefins
Ares P808 is DCPD resin with medium reactivity, good mechanical and dimensional characteristics, low styrene content and excellent filler wettability.
Show
36
of 922 results
Go to page
1
2
3
4
5
6
7
8
9
10