Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Thermoset Resins
Products in Thermoset Resins
922 Products found in Thermoset Resins
Browse
Applications
Show All 5 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 979PUR 1
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Injection Molding, Casting
End Uses:
Foundry Dressings
Density:
1600.0 - 1700.0 kg/m³
Ebalta GM 979 is an easy-to-handle-2components-polyurethane casting compound which shows very low adhesive properties compared to molding sand. Due to its high abrasion resistance, GM 979 is especially suitable for foundry patterns, which have to resist to abrasive wear by molded sand. GM 979 even keeps its high mechanical strength when using molding sands with higher temperatures.
MARTE SpA
Ares® P900
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Orthophthalics, Unsaturated Polyester (UPE)
Ares P900 is ortho-DCPD resin designed for the production of discontinuous laminates. Good mechanical characteristics and compatibility with glass fibers. Resin with controlled peak.
Hapco Inc.
Di-Pak™ R-4545/7
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
RIGIDDI-PAK R-4545 SeriesA very low viscosity potting and encapsulating system with excellent flow and penetration into the most intricate electronic components, without voids or porosity. The R-4545 Series cure to a hard, shiny, high gloss, plastic finish that is free from "blushing" under all humidity conditions. The R-4545 Series is ideal for electrical applications where surface finish and appearance are critical.
Crosslink Technology Inc.
Crosslink Technologies CLR1837
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Encapsulant, Low Voltage Insulation, Bushings, Electrical/Electronic Applications, Electrical Components
Volume Resistivity:
12000000000000.0 - 12000000000000.0 Ohm-m
CLR1837 is a heat cure, low stress, extremely tough, epoxy casting compound. It was specifically designed for casting large bushings, insulators, instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets ul94-hb flammability requirements.
Sumitomo Bakelite Company
Durez™ SUMIKON PM-9640
Polymer Name:
Phenol Formaldehyde (PF), Phenolic Compound
Processing Methods:
Transfer Molding, Injection Molding
End Uses:
Automotive Applications
Density:
1780.0 - 1780.0 kg/m³
Tensile Strength:
138.0 - 138.0 MPa
Durez™ SUMIKON PM-9640 by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used Durez™ SUMIKON PM-9640 is certified as UL Flame Rated. It is available in Granules form.
Telene
Telene® 1811 A/B
Polymer Name:
Polydicyclopentadiene (PDCPD)
Processing Methods:
Injection Molding, Reaction Injection Molding (RIM)
End Uses:
Fenders, Automotive Under The Hood, Engine Covers, Automotive Bumpers, Automotive Exterior Parts
Telene® 1811 A/B technology utilizes ring opening metathesis polymerization (ROMP). Formulations are based on dicyclopentadiene (DCPD) and engineered to produce polydicyclopentadiene polymer (PDCPD), well-known for its robust mechanical properties at low temperatures, its low water absorption, and its radio transparency. This system has been designed for hand cast parts.
Nippon Pelnox
Nippon Pelnox MU-120A
Polymer Name:
Polyurethane (unspecified)
End Uses:
Automotive Electronics, Semiconductor Applications, Encapsulant
The MU-120A performs the following functions: flexibility, low stress, heat resistance, stress release, and shock absorption.
Sino Polymer
Sino Polymer MFE 791
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Pultrusion, Hand Lay-Up, Spray Lay-Up
BCC Products
BCC Resins™ DP-11-90
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
DP-11-90 is an unfilled, low viscosity, quick setting two component urethane system. An easy to use 1 to 1 mix ratio (Part A/Part B), DP-11-90 offers the user a 3 minute working time with parts demoldable in as little as 30 minutes. When properly cured, DP-11-90 will exhibit high impact strength and yield thermoplastic-like parts. Some outstanding features include the following: Mercury free High impact strength Moderate heat resistance No objectionable odor 1 to 1 mix ratio Excellent finishing properties Turns tan color upon cure Thermoplastic appearance Longer mold life More parts per day
BCC Products
BCC Resins™ BC 7020
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
BC 7020 is a light weight two component epoxy backfill system. Unlike BC 7010, the filler portion is pre-blended into the resin and hardener components for easier handling, thus simplifying the mixing process. BC 7020 is ideally suited for foundry applications involving mold and core construction. BC 7020 features the following advantages: low cost, simple mix ratio (1 to 1 by wt.), long pot life, machinable, low shrinkage, color change to insure complete mix.Mixing Procedure:Combine equal parts (by weight) into a clean, dry mixing container such as a Hobart Kettle or similar vessel. Mix completely (5-10 minutes) until blue and yellow components yield a faint green uniform color. Empty mixture into mold cavity in 1 to 2 inch layers and compact (tamp) into place. NOTE: To insure adhesion between previously applied surface coat, laminate or BC 7020 backfill system, it is recommended that a thin layer of epoxy resin/hardener mixture be used prior to back filling with the BC 7020 system.
Hapco Inc.
Ultralloy™ 109
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Vacuum Casting, Casting
End Uses:
Toys, Prototyping, Agricultural Applications, Housings, General Purpose
The ULTRALLOY series of liquid molding compounds are tough, fast cycling, low cost, and easy to use. ULTRALLOY is designed to be used with Liquid Molding, open casting, pressure casting, or vacuum casting processes. ULTRALLOY can be used with silicone, epoxy, urethane, polyester, or aluminum molds. Low cost molds and fast cycle times are two key attributes of ULTRALLOY.ULTRALLOY is available in several series. Each series has different products with different physical properties. Properties such as elongation, tensile strength, and modulus of elasticity can be selected to mold parts with the correct physical characteristics. Choose the ULTRALLOY material with the exact properties you need, or that are required to meet specifications.ULTRALLOY is available in opaque white, clear/transparent, and in fire retardant (UL 94V-0) versions. Custom coloring can be achieved by pigmenting ULTRALLOY with Hapco's easy to mix color dispersions. Both opaque and translucent color dispersions are available.ULTRALLOY can be molded in inexpensive molds, reducing total part cost, for short run programs.ULTRALLOY is made for prototypes and short runs of plastic parts. ULTRALLOY fills the need for low cost, high performance parts, in volumes less than 10,000 parts per year.ULTRALLOY 100 SERIESA series of general purpose Liquid Molding Compounds. This product turns a natural white but is available pigmented white for extra brightness. Both versions are available in an 8.5 minute or 25 minute gel time.
Sino Polymer
Sino Polymer MFE 757
Polymer Name:
Vinyl Ester Resin
Saudi Industrial Resins
Siropol P 9170
End Uses:
Corrugated Sheet, Crates
Cure Method:
Chemical Cure
Density:
1150.0 - 1150.0 kg/m³
Siropol P 9170 resin is fast-cure, resilient polyester for use where very clear casting is needed. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food subject to user’s compliance with the prescribed limitations of that regulation.
Lati Industria Thermoplastici S.p.A
Latilub™ 92-Y10
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Injection Molding
Density:
1250.0 - 1250.0 kg/m³
Micropol
Isoplas P602
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Injection Molding
End Uses:
Pipes
Density:
956.0 - 956.0 kg/m³
Isoplas P602 is a grade has been specifically designed and developed for the production of injection molded pipe fittings. However, its good mouldability qualities make it suitable for a range of molding applications A guide to its use is available from Micropol together with advice on shrinkage, crosslinking methods, etc. (Information Guide 3).
Ingenia Polymers
Superlink™ 110
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Rotational Molding
End Uses:
Door Profiles, Sporting Goods, Profiles, Heavy Duty Bags, Fuel Tanks, Industrial Tanks
Density:
942.0 - 942.0 kg/m³
Superlink™ 110 is developed by Ingenia for the manufacture of parts to offer a unique combination of high stiffness, low temperature impact properties and excellent ESCR performance. Superlink 110 is UV stabilized for extended outdoor service and is available in natural, black and customer-specified colors. Superlink 110 in various colors will retain at least 80% of each nominal property given below for the natural compound.
Saudi Industrial Resins
Siropol 8339
Processing Methods:
Laminating, Casting
End Uses:
Consumer Applications, Bathroom Accessories, Tanks
Cure Method:
Chemical Cure
Density:
1020.0 - 1060.0 kg/m³
Siropol 8339 resin is medium viscosity, medium reactivity, general purpose, unsaturated polyester resin. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food subject to user’s compliance with the prescribed limitations of that regulation.
Sumitomo Bakelite Company
Durez™ 29502 B
Polymer Name:
Phenol Formaldehyde (PF), Phenolic Compound
Processing Methods:
Compression Molding
End Uses:
Automotive Applications
Density:
2100.0 - 2100.0 kg/m³
Tensile Strength:
65.0 - 65.0 MPa
Durez™ 29502 B by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used It is available in Granules form.
Saudi Industrial Resins
Siropol 992 FRA
Polymer Name:
Vinyl Ester Resin
Processing Methods:
Spray Lay-Up, Filament Winding, Hand Lay-Up
End Uses:
Tanks, Pipes
Cure Method:
Chemical Cure
SIROPOL 992 FRA resin is a medium viscosity, unpromoted flame retardant vinylester-based resin. Laminates made with SIROPOL 992 FRA resin have achieved Flame retardancy BS476: Part 7:1997 Class I rating and Flame retardancy ASTM E-84 Class I rating as 3% antimony trioxide is added.
Kemrock Industries and Exports
Kemrock Industries and Exports KPR 6460
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Density:
1110.0 - 1110.0 kg/m³
KPR 6460 by Kemrock Industries and Exports is a dicyclopentadiene (DCPD) based orthophthalate unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6460 is recommended for FRP composites.
Materia
Proxima® HPR 2128
Polymer Name:
Polyolefin (unspecified), Polydicyclopentadiene (PDCPD)
End Uses:
General Purpose
Proxima® HPR 2128 is uniquely formulated to provide high temperature performance. Proxima® HPR 2128 shows higher stiffness (or modulus) and higher glass transition temperature compared to other resins in the Proxima® HPR 2100 series.
Poliya Composites and Polymers
Polipol 351
Polymer Name:
Thermoset Polyester
Processing Methods:
Spray Lay-Up, Hand Lay-Up
Cure Method:
Chemical Cure
Polipol 351 is a Hand lay-up / Spray-up high reactivity polyster.
BCC Products
BCC Resins™ MB5000
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Machining
End Uses:
Molds/Dies/Tools, Prototyping, Agricultural Applications
BCC Products now offers a revolutionary state-of-the-art machineable high density board for today's demanding tooling requirements. MB 5000 is an extremely tough, high impact Urethane Plank that can be used for metal forming as well as nickel plating mandrels.
Resin-SA Pty Ltd
Resin-SA Pty Ltd RES IS006- UTA
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Unsaturated Polyester (UPE), Isophthalics
Processing Methods:
Hand Lay-Up, Hand Lay-up, Spray Lay-up, Spray Lay-Up
Resin-SA Pty Ltd RES IS006- UTA is a isopthalic resin which is used for spray up /hand laminating.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh ebatempPUR 5
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Foundry Dressings
Density:
1600.0 - 1700.0 kg/m³
Ebalta ebatemp is a high-quality two-component Polyurethane casting resin, which is very suitable for the production of vacuum thermoformed moldings. The fast casting resin, which is filled with very fine aluminum powder is very well castable and after curing very well polishable and workable. With ebatemp vacuum thermoformed moldings can be produced within 1-2 hours, these moldings show a temperature capacity of 80-90°C . Post-curing is not necessary. Material should be carefully stirred up/ shacked before use.
BCC Products
BCC Resins™ BC 7009-2
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Prototyping
BC 7009-2 is an iron filled, low-cost mass casting system. Recommended for use in casting a minimum of two inches and a maximum of six inches in non-conductive molds. Thicknesses to nine inches in metal or conductive-type molds can be successfully achieved as well. Ideal for stretch forms, patterns, dies, molds, duplications, prototypes, etc.
Swancor
Swancor 2594
Applications:
Other Industrial Applications, Sports & Recreation, Medical Devices & Assemblies
Product Families:
Epoxies, Thermoset Resins, Polymers & Resins
Chemical Family:
Epoxy & Epoxy Derivatives
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Helmets
SWANCOR 2594 is a hot-melt epoxy resin and does not contain Diuron and volatile ingredients in the formula. Suitable for the rolling process, has good surface adhesion and spreadability, and is suitable for prepregs with low weight and low resin content.
MARTE SpA
Ares® P108
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Orthophthalics, Unsaturated Polyester (UPE)
Ares P108 is medium reactivity resin characterized by good mechanical resistance and excellent filler wettability.
Nippon Pelnox
Pel-Urethane® MU-231B
Polymer Name:
Polyurethane (unspecified)
End Uses:
Speed Sensor, Relay Bases, Automotive Electronics
MU-231B its Functions Low Stress, High Thermal Conductivity, Stress Release, Shock Absorption.
BIP (Oldbury) Ltd.
Surkopak® 2135
Polymer Name:
Polyurethane (MDI-based)
Features:
Excellent Flexibility, High Plasticizing Efficiency, Soft
End Uses:
Food Packaging
Surkopak® 2135 is a plasticising polyurethane resin intended for nitrocellulose based inks and coating systems. An extensive range of aromatic polyether based Surkopak® products is available in a choice of hardness and plasticising effects, which can be applied to both rigid and flexible substrates.
Chemiplastica
Melochem 736
Density:
1500.0 - 1500.0 kg/m³
Tensile Strength:
55.0 - 55.0 MPa
The Melochem 736 Dry Granulated Molding Compound are based on melamine-formaldehyde resins fortified with high-class cellulose as reinforcement and further modified with minor amounts of special purpose additives, pigments, cure regulators and lubricants. Our Melochem 736 grade is a general-purpose injection grade. Chemical components are chosen with the purpose of minimizing the potential risks to working environment and nature. The Melochem 736 Molding Compounds can be supplied in most colors from translucent pastels to black. Molded parts are free from odor, light stable and have good moisture resistance and water absorption and are therefore dishwasher safe. Excellent surface hardness and glossy surface is combined with excellent chemical resistance. Fats, oils and common organic solvents like alcohol and acetone do not attack the materials and they are also resistant to surfactants and weak bases. They will withstand attack from weak acids fro a shorter duration. Oxygen index is 40% and is achieved without the use of external flame-retardants. No halogens are present in the composition.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 986 1Comp. A+B
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Foundry Dressings
Density:
1080.0 - 1120.0 kg/m³
Tensile Strength:
30.0 - 40.0 MPa
GM 986-1 Comp. B (Amine) can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. This material is most suitable for high pressure molding plants with high molding pressure and temperature resistance. For application at 60°C Shore hardness D is between 60-62! The postcured material is not UV stable and darkens by and by. However according to our experience the change in color does not affect its utilizability. As bonding agent on aluminum support we recommend our PU coupling paste KP 8. The material is also dimensionally stable at high temperatures. At a mold temperature of approx. 60°C a Shore hardness D of 62-64 will still be reached. Due to remanent brittleness, for complicated geometries we recommend demoulding after 48 hrs. As bonding agent on aluminum support we recommend our PU coupling paste KP 8.
Hapco Inc.
Sympoxy™ 1873
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Molds/Dies/Tools
A black epoxy system with a convenient 1:1 mix ratio by volume. This product has excellent machinability, good impact strength, and cures overnight at room temperature. It has very low shrinkage making it ideal for prototypes, models, dies, and cast production parts.
Swancor
SWANCOR 2207-A/B
Polymer Name:
Epoxy Resins & Compounds
Chemical Family:
Epoxy & Epoxy Derivatives
Processing Methods:
Pultrusion
SWANCOR 2207-A/B contains features such as moderate viscosity, good wettability to fibers, suitable for various pultruded profiles of glass fiber and carbon fiber. It has good operating time and reactivity, pulling speed up to 80cm/min with good temperature resistance.
Poliya Composites and Polymers
Polipol 383-G
Polymer Name:
Thermoset Polyester
Processing Methods:
Casting
End Uses:
Kitchenware, Flooring, Synthetic Marble, Counter Top Flatstocks, Industrial Castings
Density:
1076.0 - 1076.0 kg/m³
Polipol 383-G is an isophthalic/NPG based, acrylic modified, medium reactivity and viscosity, solid surface type unsaturated polyester resin with solid surface filling. It is suitable for the production of solid surface products with its excellent UV resistance, high strength and esthetic properties. The main areas of use are the production of hygienic materials such as kitchen / fast food counters and sinks suitable for food contact. Inner It is used in architecture and decoration, wherever a natural granite look is desired.
Nippon Pelnox
Nippon Pelnox MU-107A
Polymer Name:
Polyurethane (unspecified)
End Uses:
Speed Sensor, Relay Bases, Automotive Electronics, Semiconductor Applications, Encapsulant
MU-107A It has the following properties: flexibility, low stress, moisture resistance, stress release, and shock absorption.
Show
36
of 922 results
Go to page
1
2
3
4
5
6
7
8
9
10