Products in Ready-to-Use Products: Methacrylates

Crestabond® M1-04SL Structural Adhesive is a toughened, two-component 10:1 acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts.

Crestabond® PP-04 Structural Adhesive is designed to structurally bond low surface energy substrates such as polypropylene (PP), polyethylene (PE) and other difficult to bond plastics, commonly known as thermoplastic polyolefins (TPO). Such plastics repel rather than attract adhesion due to their non-polar, non-porous and chemically inert surfaces. Crestabond PP-04 will bond these materials without surface treatment.

Crestabond® M1-30 Structural Adhesive is a toughened, two-component 10:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. Crestabond® is a primer-less MMA adhesive requiring minimal surface preparation, which helps reduce overall production costs and increase productivity. This product has a working time of 25 to 35 minutes.

Crestabond® M1-20 Structural Adhesive is a toughened, two-component 10:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. Crestabond® is a primer-less MMA adhesive requiring minimal surface preparation, which helps reduce overall production costs and increase productivity. This product has a working time of 16 to 22 minutes.

Crestabond® M1-10 Structural Adhesive is a toughened, two-component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations. It demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts.

Crestabond® M1-04 Structural Adhesive is a toughened, two-component 10:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. Crestabond® is a primer-less MMA adhesive requiring minimal surface preparation, which helps reduce overall production costs and increase productivity. This product has a working time of 3 to 5 minutes.

Crestabond® M1-05 Structural Adhesive is a toughened, two-component 10:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. Crestabond® is a primer-less MMA adhesive requiring minimal surface preparation, which helps reduce overall production costs and increase productivity. This product has a working time of 4 to 7 minutes.

Crestabond® M7-15 Structural Adhesive is a toughened, two-component 1:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts, especially with galvanized metals.

Crestabond® M1-02 Structural Adhesive is the latest addition to the Crestabond® range of primer-less structural adhesives. It is now the fastest-curing grade, with a 10:1 ratio option available. This product is developed for high-volume assembly of smaller parts, which must be ready to handle in under 3 minutes for cost-effective productivity.

Crestabond® M7-05 Structural Adhesive is a toughened, two-component 1:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts, especially with galvanized metals. Crestabond® is a primer-less MMA adhesive requiring minimal surface preparation, which helps reduce overall production costs and increase productivity. This product has a working time of 4 to 7 minutes.

Crestabond® M1-90HV/2 is a toughened, two component 10:1 acrylic adhesive designed for bonding composites, thermoplastics and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations. Demonstrating excellent impact, peel, shear, compressive strength and fatigue resistance properties across all bonded parts.

Crestabond® M1-60HV/2 is a toughened, two-component 10:1 acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations. Demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts.

Crestabond® M7-04 Structural Adhesive is a toughened, two component 1:1 acrylic adhesive designed for bonding composites, thermoplastics and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations. The product demonstrates excellent impact, peel, shear, compressive strength and fatigue resistance properties across all bonded parts.

Palm Labs Adhesives Turbo Bond 305 are structural adhesives that bond a wide range of substrates such as metals, plastics, and composites as well as dissimilar materials. MMAs reduce assembly costs by replacing traditional metal fasteners and welding.

Palm Labs Adhesives Turbo Bond 310 are structural adhesives that bond a wide range of substrates such as metals, plastics, and composites as well as dissimilar materials. MMAs reduce assembly costs by replacing traditional metal fasteners and welding.

Palm Labs Adhesives Turbo Bond 330 are structural adhesives that bond a wide range of substrates such as metals, plastics, and composites as well as dissimilar materials. MMAs reduce assembly costs by replacing traditional metal fasteners and welding.

Palm Labs Adhesives Turbo Bond 590 are structural adhesives that bond a wide range of substrates such as metals, plastics, and composites as well as dissimilar materials. MMAs reduce assembly costs by replacing traditional metal fasteners and welding.

Palm Labs Adhesives Turbo Bond 530 are structural adhesives that bond a wide range of substrates such as metals, plastics, and composites as well as dissimilar materials. MMAs reduce assembly costs by replacing traditional metal fasteners and welding.

BD1020 is a two-part methacrylate, flexibilized, super toughened, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD1020 has a working time of 3 to 7 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BD1020 provides high strength, superior impact strength, and very flexible bonds to the above reference surfaces with generally no preparation effort. BD1020 bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to CTE (coefficient of thermal expansion) differences. BD1020 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD2025 is a two-part methacrylate, flexibilized, super toughened, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD2025 has a working time of 25 to 35 minutes and achieves nearly 90 percent of its ultimate strength in 50 to 80 minutes at room temperature curing. BD2025 provides high strength, superior impact resistance, and very flexible bonds to the above reference surfaces with generally no preparation effort. BD2025 bonds very strongly to steel, stainless steel, and aluminum metals. BD2025 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD2045 is a two-part methacrylate, flexibilized, super toughened, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD2045 has a working time of 40 to 60 minutes and achieves nearly 90 percent of its ultimate strength in 80 to 100 minutes at room temperature curing. BD2045 provides high strength, superior impact resistance, and very flexible bonds to the above reference surfaces with generally no preparation effort. BD2045 bonds very strongly to steel, stainless steel, and aluminum metals. BD2045 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD310 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD310 has a working time of 8 to 12 minutes and achieves nearly 90 percent of its ultimate strength in 18 to 25 minutes at room temperature curing. BD310 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD310 bonds very strongly to steel, stainless steel, and aluminum metals. BD310 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

ClipLock® is a two-part non sag methacrylate, structural bonding adhesive designed for the structural bonding of rotolocs, grommets, dishwasher mounts, sink clips into natural stone, granite, marble and porcelain counter top products. Combined at a ratio of 1:1, ClipLock has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. ClipLock provides high strength bonds to the above reference surfaces with generally no preparation effort. ClipLock bonds very strongly to steel, stainless steel, and aluminum metals. ClipLock adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance. Due to its high strength, keep groove widths and depths to a minimum, as wide and deep grooves may cause ClipLock to crack the granite upon reacting and shrinking. We are not liable for cracked counter tops due to this effect.

BD425FX is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD425FX has a working time of 25 to 35 minutes and achieves nearly 90 percent of its ultimate strength in 50 to 80 minutes at room temperature curing. BD425FX provides high strength bonds to the above reference surfaces with generally no preparation effort. BD425FX bonds very strongly to steel, stainless steel, and aluminum metals. BD425FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD320FX is a two-part methacrylate, flexibilized, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD320FX has a working time of 8 to 12 minutes and achieves nearly 90 percent of its ultimate strength in 18 to 25 minutes at room temperature curing. BD320FX provides high strength and very flexible bonds to the above reference surfaces with generally no preparation effort. BD320FX bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to coefficient of thermal expansion differences. BD320FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD550 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD550 has a working time of 40 to 60 minutes and achieves nearly 90 percent of its ultimate strength in 100 to 120 minutes at room temperature curing. BD550 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD550 bonds very strongly to steel, stainless steel, and aluminum metals. BD550 adhesives are highly pigmented white and have UV stabilizers in them, however BD550 must not be used to create imperceptible seams in countertops or for seaming countertops.

RodLock® is a two-part non sag methacrylate, structural bonding adhesive designed for the structural bonding of steel and fiberglass rods into natural stone, granite, marble and porcelain counter top products. Combined at a ratio of 1:1, RodLock has a working time of 4 to 8 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. RodLock provides high strength bonds to the above reference surfaces with generally no preparation effort. RodLock bonds very strongly to steel, stainless steel, and aluminum metals. RodLock adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance. Due to its high strength, keep groove widths and depths to a minimum, as wide and deep grooves may cause RodLock to crack the granite upon reacting and shrinking. We are not liable for cracked counter tops due to this effect.

BD350 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD350 has a working time of 25 to 45 minutes and achieves nearly 90 percent of its ultimate strength in 60 to 90 minutes at room temperature curing. BD350 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD350 bonds very strongly to steel, stainless steel, and aluminum metals. BD350 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD300 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD300 has a working time of 3 to 6 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BD300 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD300 bonds very strongly to steel, stainless steel, and aluminum metals. BD300 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

SeamLock Pro is a two-part methacrylate, dripless seaming adhesive designed for the inconspicuous bonding of various substrates, including solid surface (acrylic, polyester and blended products), granite, engineered stone, quartz, marble, cultured marble, glass, sintered stone, porcelain, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, SeamLock Pro has a working time of 8 to 12 minutes and achieves nearly 90 percent of its ultimate strength in 20 to 25 minutes at room temperature curing. SeamLock Pro provides high strength bonds to the above reference surfaces with generally no preparation effort. SeamLock Pro adhesives are UV stable, and will not yellow over time.

BD422FX is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BD422FX has a working time of 18 to 24 minutes and achieves nearly 90 percent of its ultimate strength in 35 to 50 minutes at room temperature curing. BD422FX provides high strength and very flexible bonds to the above reference surfaces with generally no preparation effort. BD422FX bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to coefficient of thermal expansion differences. BD422FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

SeamLock is a two-part methacrylate, flowable seaming adhesive designed for the inconspicuous bonding of various substrates, including solid surface (acrylic, polyester and blended products), granite, engineered stone, quartz, marble, cultured marble, glass, sintered stone, porcelain, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, SeamLock has a working time of 8 to 12 minutes and achieves nearly 90 percent of its ultimate strength in 20 to 25 minutes at room temperature curing. SeamLock provides high strength bonds to the above reference surfaces with generally no preparation effort. SeamLock adhesives are UV stable, and will not yellow over time.

BD305 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD305 has a working time of 2 to 4 minutes and achieves nearly 90 percent of its ultimate strength in 8 to 10 minutes at room temperature curing. BD305 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD305 bonds very strongly to steel, stainless steel, and aluminum metals. BD305 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BD330 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD330 has a working time of 18 to 32 minutes and achieves nearly 90 percent of its ultimate strength in 45 to 70 minutes at room temperature curing. BD330 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD330 bonds very strongly to steel, stainless steel, and aluminum metals. BD330 adhesives are not be used to create imperceptible seams in countertops or for seaming countertops.

BD530 is a two-part methacrylate, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 1:1, BD530 has a working time of 25 to 40 minutes and achieves nearly 90 percent of its ultimate strength in 90 to 150 minutes at room temperature curing. BD530 provides high strength bonds to the above reference surfaces with generally no preparation effort. BD530 bonds very strongly to steel, stainless steel, and aluminum metals. BD530 adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.

BF420FX is a two-part methacrylate, flexibilized, structural bonding adhesive designed for the structural bonding of various substrates, including fiberglass, steel, aluminum, and various plastics (not low energy surfaces). Combined at a ratio of 10:1, BF420FX has a working time of 3 to 7 minutes and achieves nearly 90 percent of its ultimate strength in 10 to 15 minutes at room temperature curing. BF420FX provides high strength and very flexible bonds to the above reference surfaces with generally no preparation effort. BF420FX bonds very strongly to steel, stainless steel, and aluminum metals and will allow a great deal of movement of the substrates due to cte (coefficient of thermal expansion) differences. BF420FX adhesives are not UV stable, and will yellow over time and must not be used to create imperceptible seams in countertops or for seaming countertops. This yellowing will not affect bond performance, but will affect bond appearance.