Brands in Greases

TRIBOCHAIN are adherent mineral chain oils with superior anti-wear and anti-corrosive capacities. They offer excellent resistance to damp environments and are ideal for marine applications. Also available as a lubricating aerosol sprays.

Silicone Grease®is used for applications with high temperatures up to +200°C. Our silicone based translucent grease is typically used for dielectric insulation, surface protection, release and specialized lubrication. It shows a very good resistance against tracking and corona discharge and makes surfaces resistant to water. In addition, it prevents that machined surfaces stick to gaskets and acts as electrical insulator.

777 Syn-O-Gen® is a 100% pure synthetic grease for wide-range multi-purpose applications. Wide-range applications include not only wide temperature ranges but also a wide range of performance and environmental applications. Syn-O-Gen’s advantages over mineral oil based greases are unmistakable. Performance, versatility, equipment protection, and cost savings are the hallmarks of this superior grease.

With a full range of features and benefits, Super Lube® products are the single source solution for a broad spectrum of lubrication applications. The choice for ultimate protection is clear.

Power-Lift Grease PL-10™ is an anti-wear, extreme-pressure, lithium-complex grease with anti-friction additives. PL-10™ is unique because its formulation contains Muscle Metal Treatment MT-10® technology for increased lubricity and boundary film lubrication. PL-10™ treats, seals and protects metal surfaces to dramatically reduce friction-related heat and wear. It is designed to meet the highest requirements for film strength, operating temperatures, stability and lubrication life, which are essential for the reliable operation of today’s industrial, automotive and commercial equipment. Absolutely one of the best anti-wear, extreme-pressure, lithium complex greases designed to meet the highest requirements for film strength, operating temperatures and lubrication life – essential for the reliable operation of today’s equipment.

KILN GREASE HT™ is a premium lubricant formulated using a high viscosity, severely refined base oil. The base fluid combined with aluminum complex thickener produces a grease with exceptional high temperature, water resistance, and high load characteristics. The grease is ideal for use in kiln bearings, steel mills, pulp and paper mills, or in any severe service application where temperature, water washout and contamination, extreme loads or a combination of these factors are present.

White Ice series are silicone based thermal greases engineered with special binding agents to reduce bleed and oil separation. These compounds offers excellent wetting properties, spreadability and the low viscosity formulation makes them easy to apply to thin bond line thickness for minimum thermal resistance. Timtronics silicone compounds offer superior conductivity, low thermal resistance and long term stability.

Mycroleum offers the finest of lubricants and fuel additive products. Made from uniquely formulated recipes and the highest grade of ingredients, Mycroleum produces results in a results driven world.

High-purity silicone adhesives offer efficiencies in manufacturing by maximizing throughput. From biocompatible adhesives to high-temperature space-grade adhesives, NuSil® high-performance silicones from Avantor® are formulated to provide the strongest bond for a wide range of substrates in the most demanding environments.

FASTEX is a comprehensive range of Oils, Greases, and Surface Modifiers designed to make advanced and high quality lubrication technology available to end-users anging from Heavy, Medium and Light industries through to Utility, Transit and Service Providers.

JACKING SYSTEM GREASE ECF™ is safe to use in offshore applications since it is metal free and is formulated to conform to the strict North Sea Environmental Guidelines. It utilizes a water resistant, calcium thickener that is enhanced to improve adhesion and provide greater protection against water wash off, wear, and corrosion. JET-LUBE JACKING SYSTEM GREASE ECF contains specially selected solid bounding lubricants to provide outstanding galling resistance and lubrication properties. The solid boundary additives synergistically combine to produce a superior lubricating film with high-load and low-wear characteristics. The base oil blend of this product is of lower viscosity than most multipurpose greases allowing it greater potential for bio degradation and contains additional anti-wear, anti rust, and antioxidant additives.

JET-PLEX-EP™ Lithium Complex Grease is the ideal multipurpose grease for use in extreme pressure and high temperature operating conditions. It is the top of the line product for severe applications and general purpose lubricant.

Cen-Pe-Co is one of the oldest and largest independent oil compounders in the United States. This means we blend our own oil. We have the ability to obtain the highest-quality ingredients (components) available, blend them together and market them under our exclusive Cen-Pe-Co brand name.

Versilube® products include premium quality, silicone-based greases, lubricants and compounds with unique physical properties and performance characteristics that are formulated for critical lubrication applications and hostile environments. These silicone-based products provide longer service life than most other materials.

ALCO-EP™ ECF™ is a premium, state-of-the-art, multipurpose complex grease thickening a blend of synthetic and vegetable oils selected to provide the level of biodegradation required to meet the Norwegian “Yellow” and the combined UK and Netherlands “E” categories. These are the safest environmental ratings for lubricating grease. The non-plating, organic EP/antiwear additives allow ALCO-EP ECF to be used where tolerances are low and/or speeds are high.

LOX-8 Grease is engineered to lubricate in harsh chemicals applications where extreme acids or powerful oxidizers are used. It prevents stainless steel galling and withstands high pressures and both high extreme and cryogenic deep-freeze temperatures. It is oxygen-safe, waterproof, and versatile, making it an all-purpose plumbing and O-ring lubricant. Works great with oil-based systems, hydraulic oils, and fuels. LOX-8 is recommended for use as both a lubricant and as a sealant. Use LOX-8 Grease in environments where extended service life is important: medical, nuclear and other high-tech fields including chemical processing, industrial gasses and other aggressive applications. Approved for use in food processing facilities.

Blue Ice Series are unique synthetic thermal greases engineered to provide low bleed and oil migration (Pump Out) to prevent component contamination associated with silicone greases. They offer superior thermal conductivity and low thermal resistance with long term stability.

Magnalube®-G teflon grease is mainly used for applications involving high temperatures up to +288°C, high loads up to 7,000 psi, chemicals and wear within heavy machinery and precision equipment. In addition, it protects against rust in moist environments. In general, it provides a six times better performance than conventional grease.

AP-1™ is a Formulated from bentone clay, AP-1™ is noted for its high temperature insensitivity, is non-melting and does not thicken excessively at temperatures as low as 0°F (-18°C). It has mechanical stability, is water resistant, displays high stability on working, has excellent adhesion to metals, pre-vents wear and has superior storage life.

DEACON PFPE GREASE is a PTFE thickened perfluorinated polyether fluid providing optimum oxidation resistance at temperatures up to 500ºF. This combination of materials has the additional benefit of being essentially inert to all but a couple of fluorinated, higher molecular weight solvents. The base fluid carries exceptionally high extreme pressure properties with a 4-Ball Weld Point of 800 - 1000 kilograms of force. It must be cautioned, however, that base oil viscosity is the critical parameter in long term bearing protection and performance.

#202 MOLY-LITH™ is a black, thermally stable, lithium 12-hydroxystearate soap grease containing microfine molybdenum disulfide (MoS2), antioxidants & rust inhibitors. #202 MOLY- LITH has a dropping point of 390°F (199°C), is water resistant and displays excellent work stability under high loads, high speeds, shock and vibration. Sub-micron particles of Molybdenum Disulfide, blended into the superior lubricating grease base, contribute to the good load carrying and low friction characteristics.