Brands in Other Paints & Coatings

BN Lubricoat Blue® Spray is packaged in a convenient trigger sprayer for applying thin, uniform, quick-drying layers of coating onto most any substrate.

IR Blocker 40 Plus™ family of coatings enables Outdoor Displays to run cooler while enhancing viewability in bright ambient environments.These coating are fully temperable making them an excellent choice for exterior surfaces.

The FluoroSyl family of coatings provide anti-fingerprint, anti-smudge and anti-fouling properties to glass, metal and many other materials. Coated surfaces have a low coefficient of friction and lubricious slippery feel. FluoroSyl provides an extremely durable abrasion resistant coating that is optically transparent with a low refractive index.

Protal ARO™ is a VOC free, 100% solids liquid epoxy coating formulated to be applied over FBE as an ARO coating (abrasion resistant overlay). It is a 3:1 ratio coating that can be spray or hand applied in the shop or field.

FROSTFREE™ EXTENDED-WAVELENGTH CONDUCTIVE COATINGS FOR LiDAR WINDOWS coating are with a solid-state defrosting capability and ultra broadband transmittance throughout the visible and near-infrared LiDAR wavelengths.

ACRYCOTE is an isocyanate free alternative to urethane. It is a two component, cross linked acrylic coating designed to incorporate all the desirable characteristics that have made urethane popular: gloss retention, excellent exterior durability, and good chemical and solvent resistance.

PTU™ is a new generation of high-performance polyurea coating and is the result of six years of development and field testing. This chemical resistant coating provides high-ductility, allowing it to move with expanding and contracting surfaces. PTU™ can be sprayed to any thickness in one application and returned to service in a matter of hours.

When Thomas Edison founded General Electric, he insisted the company have the highest capability in fundamental material research. For over sixty years, Glyptal generated the robust, protective coatings necessitated by G.E. The company would look to Glyptal to formulate and manufacture its specialty needs when no existing product satisfied the requirements. We always got the tough ones.

CPP™ is a two-component moisture insensitive, 100% solids, high strength and reinforced structural-grade epoxy. CPP is truly versatile and can be used as an adhesive, patching filler, and as a high-build, stand-alone protective liner. The material can be applied as thin as a skim-coat and up to 1/2" per pass (vertical/overhead). Blended with reinforcing agents and various fibers, the Epoxytec CPP when cured acts as a fiber-reinforced- polymer (FRP) with high strength mechanical properties. Contains no solvents (no VOCs). CPP bonds to concrete, steel, wood, brick, some plastics and most construction materials.

PureMatte™ is a two component matte waterbased wood floor finish specifically formulated to preserve the natural matte look of wood. PureMatte provides commercial durability, excellent wear resistance and clean-ability with a classic matte look.

Dorothy Mae 10FW01-8 Series - Ultra-matte is formulated for an ultra-matte finish. This paint provides excellent coverage and adhesion on furniture and home décor items. Dorothy Mae Paint provides one coat coverage on most surfaces and does not require priming or special surface preparation. This paint is suitable for use on wood, metal, ceramic, glass, canvas and more. For interior use only.

APCO Coatings brand consists of a broad range of products including cost effective alkyd enamels and primers, highly chemical resistant tank linings, high performance acrylic polyurethanes, 100% solids epoxies and polyurea. The understanding of all aspects of the coating job, from surface prep, application equipment and service environments ensures APCO coatings are engineered to stand the test of time. Key raw materials such as resins and curing agents are sourced only from industry leading suppliers and are all domestically produced. Rigid quality control standards ensure consistency batch after batch.

High-purity silicone adhesives offer efficiencies in manufacturing by maximizing throughput. From biocompatible adhesives to high-temperature space-grade adhesives, NuSil® high-performance silicones from Avantor® are formulated to provide the strongest bond for a wide range of substrates in the most demanding environments.

Michem Dispersion Urethanes are water based polyurethane dispersions that can enhance toughness, scratch resistance, water resistance and flexibility of coatings. Michem Dispersion Urethanes are useful for industrial wood, concrete, and metal substrates.

ColorTec 500™ Pigmented 100% Solids Epoxy is a 2-component 100% solids, zero VOC colored floor coating system that is used in a wide variety of applications such as high build pigmented coat for a host of decorative concrete systems, primer coat and binder coat for DK Flakes and DK Metallics.

Aqua-Shield Temp-Alert® 350 is the one and only clear coating for aluminum medical & industrial cylinders that changes from glossy clear coatings to dark green and then black color when exposed to temperatures in excess of 350°F.

DK 500™ 100% Solids Epoxy Clear Coat is a 2 component 100% solids, zero VOC floor coating system that is used in a wide variety of applications such as, thick-build clear coat for a host of decorative concrete systems, Dura-Kote Flake, Dura-Kote Metallic systems, and in certain applications as a primer coat and/or binder coat.