Products results

BB Resins BB-Amide 5011 is a low viscosity polyamidoimidazoline resin.

Kraton D1101 E polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Europe in the physical forms identified as follows in the grade nomenclature: Kraton D1101 ES - supplied as porous pellets dusted with amorphous silica Kraton D1101 ET - supplied as porous pellets dusted with talc Kraton D1101 ESM - supplied as powder dusted with amorphous silica Kraton D1101 E polymer is used as a modifier of bitumen in roofing felt compounds, roads and pipe coating. It may also be suitable for use in formulating adhesives, sealants and coatings and in the modification of polymers.

Kraton D1101 K is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from North America in the physical form identified below. Kraton D1101 KT - supplied as a dusted porous pellet Kraton D1101 KU - supplied as an undusted porous pellet Kraton D1101 KIM - supplied as a dusted powder Kraton D1101 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

UNI-REZ 110 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 110 polyamide resin was developed for release lacquers but can also be used as a modifying resin to improve hardness.

Kraton D1183 P is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied from North America in the physical form identified below. Kraton D1183 P T - supplied as a dusted dense pellet Kraton D1183 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Kraton D1161 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied from North America in the physical form identified below. Kraton D1161 PT - supplied as a dusted dense pellet Kraton D1161 PTM - supplied as a dusted powder Kraton D1161 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Kraton D1157 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1157 ES - supplied as porous pellets dusted with amorphous silica Kraton D1157 ETM - supplied as powder dusted with talc for the North American market Kraton D1157 E is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

UNI-REZ™ thixotropic polyamides provide performance well beyond the capabilities of other competing technologies for controlling the rheology of structured non-drip gloss paints and varnishes. Kraton thixotropic grades are non-reactive polyamide resin for use in thixotropic alkyds.

UNI-REZ 2224 polyamide resin is an alcohol soluble type resin for flexographic printing. It has high compatibility with nitrocellulose and very low viscosity, allowing for high heat resistance and high color strength.

UNI-REZ 2633 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2633 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.

An alcohol soluble resin. Used in flexographic printing inks for plastic substrates. Provides the fastest solvent release in our alcohol soluble polyamide resin series and is compatible with modifiers commonly used in alcohol inks.

Kraton D1118 E is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from Europe in the physical form identified below. Kraton D1118 ET - supplied as porous pellets dusted with talc Kraton D1118 ES - supplied as porous pellets dusted with amorphous silica Kraton D1118 ESM - supplied as powder dusted with amorphous silica Kraton D1118 ETM - supplied as powder dusted with talc for the North American market Kraton D1118 E is used for modification of bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

Kraton D1102 J is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Japan in the physical form(s) identified below in the grade nomenclature: Kraton D1102 JSZ - supplied as crumbs dusted with amorphous silica Kraton D1102 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

UNI-REZ 2223 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

Kraton D1113 P is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied from North America in the physical form identified below. Kraton D1113 PT - supplied as a dusted dense pellet Kraton D1113 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

UNI-REZ 2651 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2651 hot melt polyamide adhesive has excellent low temperature impact resistance and good adhesion to polyolefin.

UNI-REZ 119 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 119 polyamide resin was developed for release lacquers and has the lowest solution viscosity but fast solvent release.

Kraton D1163 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied from North America in the physical form identified below. Kraton D1163 PT - supplied as a dusted dense pellet Kraton D1163 PTM - supplied as a dusted powder Kraton D1163 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

UNI-REZ 2678 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2678 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.

UNI-REZ 2626 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2626 hot melt polyamide adhesive has excellent heat and chemical resistance and exhibits high green strength allowing for fast line speeds.

Kraton D1155 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied from Japan in the physical form(s) outlined in the grade nomenclature below. D1155 JOP - supplied as dusted dense pellets D1155 JO - supplied as dusted crumb Kraton D1155 J is used as a modifier of polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

Kraton D1192 E is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms described below: Kraton D1192 ET- supplied as porous pellets dusted with talc Kraton D1192 ES - supplied as porous pellets dusted with amorphous silica Kraton D1192 ESM - supplied as powder dusted with amorphous silica Kraton D1192 ETM - supplied as powder dusted with talc for the North American market Kraton D1192 ETF - supplied as fluffy crumbs dusted with talc Kraton D1192 E is used for modification of industrial and paving bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

Kraton D0243 E polymer is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Europe in the physical form identified below. Kraton D0243 ET - supplied as a porous pellet dusted with talc Kraton D0243 E is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

Kraton D1117 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied from North America in the physical form identified below. Kraton D1117 PT - supplied as a dusted dense pellet Kraton D1117 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

UNI-REZ 2722 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2722 hot melt polyamide adhesive has excellent heat and chemical resistance and exhibits high green strength allowing for fast line speeds.

UNI-REZ 2635 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2635 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.

UNI-REZ 2656 hot melt polyamide adhesive is a resin-based on dimer acid. UNI-REZ 2656 hot melt polyamide adhesive has excellent low-temperature impact resistance and good adhesion to polyolefin.

Kraton D0243 E polymer is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Europe in the physical form identified below. Kraton D0243 ET - supplied as a porous pellet dusted with talc Kraton D0243 E is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

Kraton D1118 K is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from North America in the physical form identified below. Kraton D1118 KT - supplied as a dusted porous pellet Kraton D1118 KTM - supplied as a dusted powder Kraton D1118 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

UNI-REZ 2620 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2620 offers good chemical resistance, low softening point and low viscosity which allows for a lower application temperature and fast set.

Kraton D1161 K is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied from North America in the physical form identified below. Kraton D1161 KU - supplied as undusted porous pellets Kraton D1161 KT - supplied as talcum dusted porous pellets Kraton D1161 KS - supplied as amorphous silica dusted porous pellets Kraton D1161 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

UNI-REZ 2239 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.