Products results

Conformat N758 is a continuous strand, glass fiber reinforcing mat. N758 is porous, very conformable making it an excellent reinforcing mat for complicated contoured parts manufactured by Resin Transfer Molding (RTM), Compression Molding and Closed Mold Injection. With the addition of an optional extra surface veil, N758XS provides an outstanding surface finish.

APCM DA 4092 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

Micropol L20 is a rotational molding powder based on a conventional polyethylene formulation designed to produce moldings with a high gloss finish and outstanding toughness. This material has been established for many years as an outstanding low density polyethylene powder for Rotational Molding.

Bright Dyes® FLT Orange Wax (Cake) is specially formulated versions of Xanthene dye, certified by NSF International to ANSI/NSF Standard 60 for use in drinking water. This dye is the traditional fluorescent water tracing and leak detection material and has been used for labeling studies from the beginning of the century. It may be detected visually, by UV light and by appropriate fluoremetric equipment. Today it is most often used visually. This dye has been used by the military to mark downed pilots for search and rescue operations over large water bodies. Visually the dye appears orange to red-orange, depending on its concentration and under UV light as bright yellow.

Microcene MC182 is a new ‘Tank Grade’ polymer from Micropol based on Metallocene technology. A second generation, metallocene medium density polyethylene, with Hexene as co-monomer, suitable for rotational molded items requiring superior mechanical properties. Outstanding process and product benefits result from using polymers of narrow molecular weight distribution and low viscosity at zero shear rates.

Greengran B621J (Heavy Weight Waterworks Grade) is a standard waterworks grade. Granules based on polypropylene and natural fibers, which combines very high stiffness and strength with moderate impact strength. Its excellent heavy weight outdoors properties and moisture stability make it suitable for sweat- and salt water use. Typical markets are within shoreline protection- and artificial reef applications.

Bright Dyes® FLT Blue Tablet is specially formulated versions of food grade dye FD & C Blue. Bright Dyes® FLT Blue products have been certified by NSF International to the ANSI/NSF Standard 60 for use in drinking water. This dye is used for visual detection only and cannot be seen under ultraviolet light or detected by fluorometry. However, when used visually, its color is often thought to be more acceptable to public view than the fluorescing red or yellow green Bright Dyes® products. In this respect, it is sometimes used in fountains, ponds and streams for decorative effect. Visually, the dye appears as aqua to royal blue depending on its concentration and activity of the water.

ONEX MB 1000RE provides masterbatches of multi-wall carbon nanotube (MWCNT) in various types of resins (e.g. epoxy, silicone), ONEX-MB 1000RE, in small scale, which can be employed in a variety of applications such as adhesives, marine coatings or resin-based parts.

JSR NV Series are Polymer Alloys consisting of Acrylonitrile Rubber and Poly Vinyl Chloride. It has good processability and extrusion characteristics.

KM-U-143sMR is an octane copolymer MDPE Rotational Molding Resin that contains processing antioxidant and a UV stabilizer. This grade shows exceptional low temperature impact properties, low viscosity, and easy mold release.

Bright Dyes® Standard Blue Tablet is specially formulated versions of the dye Acid Blue 9. This dye is used for visual detection only and cannot be seen under ultraviolet light or detected by fluorometry. However, when used visually, its color is often thought to be more acceptable to public view than the fluorescing red or yellow green Bright Dyes® products. In this respect, it is sometimes used in fountains, ponds and streams for decorative effect. Visually, the dye appears as aqua to royal blue depending on its concentration and activity of the water.

Microcene MC181 is a second generation, metallocene medium density polyethylene, with Hexene as co-monomer, suitable for rotational molded items requiring superior mechanical properties. Outstanding process and product benefits result from using polymers of narrow molecular weight distribution and low viscosity at zero shear rates.

Bright Dyes® FWT Red 50 Liquid is specially formulated versions of Rhodamine WT dye for convenient use in water tracing and leak detection studies. This bright, fluorescent red dye is certified by NSF International to ANSI/NSF Standard 60 for use in drinking water. It may be detected visually, by ultraviolet light and by appropriate fluoremetric equipment. Today it is most often used visually. Visually the dye appears bright pink to red, depending on its concentration and under ultraviolet light as bright orange.

Bright Dyes® FWT Red 25 Liquid are proprietary formulations of Rhodamine dyes. Our Bright Dyes® FWT Red liquid products is specially formulated versions of Rhodamine WT dye for convenient use in water tracing and leak detection studies. This bright, fluorescent red dye is certified by NSF International to ANSI/NSF Standard 60 for use in drinking water. It may be detected visually, by ultraviolet light and by appropriate fluorometric equipment. Today it is most often used visually. Visually the dye appears bright pink to red, depending on its concentration and under ultraviolet light as bright orange.

This veil is a very conformable continuous glass fiber surfacing veil comprised of highly uniform, randomly distributed filaments bonded with special formulated resins. The veil provides excellent surface appearance on glass reinforced plastic composite parts and also has outstanding corrosion resistance properties. This veil is available for purchase in LAYER-PAK® format.

Microlin ML54 is a rotational molding powder based on a specially developed easy flow linear polyethylene formulation designed to produce moldings of good rigidity combined with excellent impact resistance & environmental stress crack resistance.

ATTSHIELD OP 145 is recommended for water tanks, septic tanks, bathtubs, cooling towers, and other similar applications.

Bright Dyes® Industrial Red Tablet is specially formulated versions of Rhodamine B, one of the traditional fluorescent water tracing and leak detection materials. It may be detected visually, by ultraviolet light and by appropriate fluorometric equipment. Visually the dye appears as a bright dark red to magenta, depending on its concentration and under ultraviolet light as a bright orange.

Aluminium flake powder

Lumicene® mPE M3581 UV is a Second generation Metallocene PE for rotomolding applications requiring good mechanical properties and gloss.

ONEX MW 1003 a variety of chemically functionalized multi-wall carbon nanotubes for several applications in powdered form or dispersions.

Bright Dyes® FLT Yellow/Green Wax (Cone) is specially formulated versions of Xanthene dye, certified by NSF International to ANSI/NSF Standard 60 for use in drinking water. This dye is the traditional fluorescent water tracing and leak detection material and has been used for labeling studies from the beginning of the century. It may be detected visually, by UV light and by appropriate fluoremetric equipment. Today it is most often used visually. This dye has been used by the military to mark downed pilots for search and rescue operations over large water bodies. Visually the dye appears yellow/green, depending on its concentration and under UV light as lime green.

ONEX MW 1001 provides a variety of chemically functionalized multi-wall carbon nanotubes for several applications in powdered form or dispersions.

Anchor Seal SY6009T* Black is anchor-seal epoxy for potting compounds and encapsulants coils and transformers. It is used in low health hazard, thermal conducting switches.

APCM DA 4080 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.

Aluminium pigments, paste

APCM DA 4517 is an epoxy prepreg designed for a temperature range of -67°F (-55°C) to 350°F (177°C), with a cure of 180°F (82°C) for three hour. Shorter cures times are available at higher temperatures. The system is designed to be post cured if the higher temperature service range is required.

Micropol L7 is a rotational molding powder based on a conventional polyethylene formulation designed to produce moldings with a high gloss finish and outstanding toughness. This material has been established for many years as an outstanding low density polyethylene powder for Rotational Molding.

JSR NV Series are Polymer Alloys consisting of Acrylonitrile Rubber and Poly Vinyl Chloride. It has good processability and extrusion characteristics.

APCM DA 4518U is a tough, versatile, modified epoxy resin system that cures at 250°F to 350°F. DA4518U can be supplied as a prepreg tape coated on unidirectional graphite.

KM U-542sMR HDPE Octene Copolymer sHDPE Rotational Molding Resin It has good low temperature impact properties, high stiffness, and a broad processing window. It is very white and enhances part appearance. It is resistant to gas fading.

Bright Dyes® FLT Blue Wax (Donut) is perfect for use in time studies, travel studies, sea marking, and flow/current mapping. Donuts are the largest wax dye available. This dye is only used for visual representation and will NOT be seen under ultraviolet light. Visually this dye appears aqua to royal blue. Our FLT Blue line is our only food grade/food safe water tracing line. This dye is ANSI/NSF Standard 60 certified for use in drinking water. The most applicable uses for this dye are is food zones or with food contact surfaces.

Attshield 47 is a novolac epoxy vinyl ester resin that resists corrosion in a wide range of solvent, acidic, and slightly alkaline environments. This tough, high-strength resin is used to make fiberglass-reinforced laminates with high impact strength and resistance to a variety of mechanical stresses. This resin is ideal for filament winding and the production of products that require resistance to harsh environments and temperature changes. This resin has excellent wettability and curing properties as well.

JSR NV Series are Polymer Alloys consisting of Acrylonitrile Rubber and Poly Vinyl Chloride. It has good processability and extrusion characteristics.

Microlin ML73 is a new generation easy flow hexane linear rotational molding powder base designed to produce moldings of good rigidity combined with high impact strength at low temperatures. Also featured is excellent environmental stress crack resistance.

Conformat N863 is a continuous strand, glass fiber reinforcing mat. N863 is porous, very conformable making it an excellent reinforcing mat for complicated contoured parts manufactured by Resin Transfer Molding (RTM), Compression Molding, Closed Mold Injection, and many other closed molding applications.