Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Dye Type
- Pigment Type
- Industrial Additives Functions
Features & Benefits
- Industrial Additives Features
- Product Highlights
The dye is resistant to absorption on most suspended matter in fresh and salt water. However, compared to Bright Dyes FLT Yellow/Green products it is slightly more resistant to degradation by sunlight but less resistant than our FWT Red products. As always a qualified hydrologist or other industry professional should evaluate the use and suitability of these products for any specific application.
- Features
- Its fluorescent properties offers greater apparent contrast than non-fluorescent blue
- May be used for visual, ultravioletand fluorometricinspections
- Disappears in sunlight more rapidly than FWT Red dye and non-fluorescent blue
- Resistant to the absorption of suspended matter
- Slow to moderate rate of dispersion
- Best for visual inspections of moderate volumes of water, 20,000-50,000 gallons
- Cake: Up to 3,600 gallons
Applications & Uses
- Markets
- Applicable Processes
- General Use
- Examine Water Movement, Current, Flow (In springs, streams, lakes etc.)
- Flow Mapping, Tracing and Time Studies
- Pollution Studies (Discharge – Rate of Flow – Mixing, Diffusion and Dispersion – Circulation)
- Coverage
Coverage of Products One Cake Light Visual 1800 gallons Strong Visual 180 gallons - Applications
- Tracing studies
- Time and travel studies
- Sea markers, flow mapping
- Power plant piping
- Lake and Pond leak detection
Properties
- Color
- Appearance
- Brick Red Cone
- Wrapping
- Heat Sealed In Cold Water Soluble Film
- Typical Properties
- Note
1 In deionized water in 100 ml flask. Actual delectability and coverage in the field will vary with specific water conditions.
2 No significant change in fluorescence between 6 and 11 pH.
Value | Units | Test Method / Conditions | |
Detect Ability of Active Ingredient¹ | max. 100 | ppb | — |
Detect Ability of Active Ingredient¹ | max. 100 | ppb | — |
Dissolution Time (in sea water) | 45.0 | minutes | — |
Dissolution Time (in sea water) | 45 | minutes | — |
Maximum Absorbance Wavelength² | 515 - 535 | nm | — |
Maximum Absorbance Wavelength² | 515 - 535 | nm | — |
Weight | 1.1875 - 1.3125 | Ounce | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Caution
These products may cause irritation and/or staining if allowed to come in contact wit the skin. The use of gloves and goggles is recommended when handling this product, as with any other dye or chemical.
Packaging & Availability
- Sizes
1 7/8” Base 7/8” Height
- Sizes
1 7/8” Base 7/8” Height
Storage & Handling
- Storage Conditions
- Store product out of sunlight, in a cool and dry location.
- Shelf life is 4 years from date of purchase.