Brands results

Duratex® tubes is phenol or epoxy resin with reinforcement of cotton cloth. Special grades for hydraulic guide rings and miniature ball-bearing cages.

Polyethylene terephthalate is a semi-crystalline material from the polyester family of plastics and, due to its good thermal and mechanical properties, is counted among the polymer group of engineering plastics. It has a high surface hardness and good sliding and wear behavior.

Paracril NBR grades are produced by cold and hot polymerization process. The cold process yields linear polymers with good processing characteristics and solubility in polar solvents. The hot polymerization process leads to more branching. Branching in the hot Paracril grades is more developed in the higher viscosity grades. The hot polymers offer improved green strength. &rosslinNed 3aracril N%5 grades are unique in processing and function.

DAI-EL differs in its synthetic pathway (production method) from natural rubber, which is synthetized internally in plants, and diene rubber, which uses oil as a raw material, and is a fluoroelastomer that exhibits exceptionally sophisticated qualities.DAI-EL features a tactile sensation that feels good when touched. Because of its extremely high durability due to the performance of the fluorine compound, DAI-El fluoroelastomers have a physical property that resists quality deterioration. This allows the material to maintain its appearance and texture through long-term use.In using Daikin’s own tone technology, an assortment of colors is available.

Due to its good thermal and mechanical properties, this semi-crystalline material belongs to the polymer group of engineering plastics. It has a high surface hardness and good sliding and wear behavior. Since POM belongs to the group of short-chip materials, machining is significantly simplified when compared to similar plastic materials.

A unique range of fully organic elastomers ideally suited to thermal, dynamic and specific plasma processes where radical concentrations are generally lower or where inorganic filler systems are undesirable. The Kimura® range of high performance elastomer materials utilize a controlled molecular architecture which provides a unique self-reinforcing polymer structure, providing improved chemical resistance without the use of inorganic fillers of any kind. This high purity material breaks new ground in elastomer technology, developed specifically for aggressive chlorine and CxFy based semiconductor applications. Kimura® elastomers span the range of fluoro and perfluoro (FKM and FFKM) materials and includes unique hybrid elastomers, specifically developed by PPE, for the semiconductor industry, to offer a step-change in sealing performance, surpassing what has previously been achievable for fully organic materials. The high purity of the polymer combined with the absence of inorganic fillers makes Kimura® materials suitable for processes involving lower feature sizes.

TRIEL, thermoplastic polester elastomer, offers significant chemical resistance, thermal resistance, Weatherability and low temperature flexibility

ELASTOSIL® is an all-rounder for countless applications. Silicone rubbers consist essentially of silicone polymers and fillers. They cure at high temperature (HTV/LSR grades) or room temperature (RTV grades) with suitable reactants, forming a three-dimensional structure and transforming the uncured compound in a plastic state into an elastomeric rubber. Silicone elastomers are flexible at low temperatures and resistant to heat and aging (UV radiation and ozone). They are easy to process and have good mechanical properties that remain unchanged over a wide temperature range. They have a neutral taste and are biologically unreactive.

Paraclean NBR has been developed to provide a low residue, fast curing grade of N%5. 3araclean grades are cold polymerized for best processing characteristics.

Polyvinylidene fluoride shows a higher tensile strength, pressure resistance and dimensional stability than the related PTFE, but friction and insulation properties are lower. PVDF has a high mechanical strength and toughness at lower temperature and it’s self-extinguishing. The operating temperature ranges from -30 °C to +150 °C. PVDF shows a high resistance to chlorine, bromine and high-energy radiation.

The Nitriflex line supplies an increasingly demanding market and different market segments, producing elastomers for the automobile, construction, footwear, food, and textile industries, among other

Arnitel TPC, a thermoplastic polyester elastomer, is used as a lighter, smarter, greener material alternative to conventional rubbers. Because of its excellent characteristics, it offers design engineers exceptional flexibility—giving them the freedom to implement the most innovative product concepts.  Arnitel has a broad range of hardnesses, making it capable to replace rubbers, metals, leather and other thermoplastics. This thermoplastic elastomer delivers superior chemical resistance, along with heat and wear resistance, plus the ability to be recycled.

Polyetherimide has a high mechanical strength in connection with a good chemical and heat resistance (operating temperature up to +170 °C), good dimensional stability and creep resistance. lts unique torque strength permits the economical substitution of machined fabricated small parts from steel.